Standard Icon

Industry Applications Standards

Displaying results 281 - 320 of 943
Standard Name
Status Help less all
620-1987 - Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hpAssists in a uniform understanding of the construction, interpretation, and use of motor thermal limit curves. The author defines thermal limit... Withdrawn Standard
620-1996 - Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction MachinesIn this IEEE standard thermal limit curves for induction machines are defined. A procedure is established for the presentation of these curves,... Active Standard
625-1979 - Recommended Practices to Improve Electrical Maintenance and Safety in the Cement IndustryThis IEEE recommended practice defines and recommends practices for improving electrical maintenance and safety in the cement industry. These... Superseded Standard
625-1990 - Recommended Practice to Improve Electrical Maintenance and Safety in the Cement IndustryThe IEEE recommended practice assists in the effective application of relays and other devices for the protection of shunt capacitors used in... Superseded Standard
625-2001 - Recommended Practice to Improve Electrical Maintenance and Safety in the Cement IndustryThese recommended practices are intended as a reference document for use by members of cement industry electrical maintenance departments. The... Withdrawn Standard
634-1978 - Standard Cable Penetration Fire Stop QualificationThis standard provides qualification test procedures for type testing cable penetration fire stops when mounted in rated fire barriers. In the... Withdrawn Standard
634-2005 - Cable-Penetration Fire Stop Qualification TestRevision of IEEE Std 634-1978 This standard is applicable to fire stops of various materials and construction. Cablepenetration fire stops are... Active Standard
635-1989 - Guide for Selection and Design of Aluminum Sheaths for Power CablesThe purpose of this guide is as follows: to outline requirements and establish design guidelines for the selection of aluminum sheaths for extra... Superseded Standard
635-2003 - Guide for Selection and Design of Aluminum Sheaths for Power CablesDesign guidelines for cables with aluminum sheaths on low-, medium-, and high-voltage cables are provided. The aluminum sheath is an impervious... Active Standard
644-1987 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power LinesEstablishes uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power... Withdrawn Standard
644-1994 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power LinesIn this IEEE Standard uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC)... Active Standard
656-1985 - the Measurement of Audible Noise from Overhead Transmission LinesThe purpose of this standard is to establish uniform procedures for the measurement of audible noise from overhead transmission lines, using... Superseded Standard
656-1992 - the Measurement of Audible Noise from Overhead Transmission LinesIn this standard uniform procedures are established for manual and automatic measurement of audible noise from overhead transmission lines. Their... Active Standard
664-1980 - Guide on the Measurement for the Performance of Aeolian Vibration Dampers for Single ConductorsThe basic engineering approach to the control of vibration of overhead conductors is to compare, at an acceptable amplitude, the wind power input... Superseded Standard
664-1993 - Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single ConductorsThe current methodologies, including apparatus, procedures, and measurement accuracies, for determining the dynamic characteristics of vibration... Active Standard
666-1991 - Design Guide for Electric Power Service Systems for Generating StationsThis guide applies to power station service systems that supply electric power to auxiliary loads. The discussions and recommendations contained... Superseded Standard
666-2007 - Design Guide for Electric Power Service Systems for Generating StationsThis guide applies to station service systems that supply electric power to auxiliary loads for electric power generating stations. The... Active Standard
668-1987 - Recommended Practice for Electrical Heating Applications to Melting Furnaces and Forehearths in the Glass IndustryThe purpose of this recommended practice is to present procedures and positions preferred by the IEEE for using electric heating in the glass... Withdrawn Standard
675-1982 - Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)This IEEE standard defines a method for incorporating more than one source of control into a CAMAC crate. The standard fully conforms to the... Active Standard
683-1976 - Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms can satisfy... Active Standard
693-1984 - Recommended Practices for Seismic Design of SubstationsThe report presents recommended practises containing recommendations for the seismic design of substation facilities. Superseded Standard
693-1997 - Recommended Practices for Seismic Design of SubstationsRecommendations for seismic design of substations, including qualification of each equipment type, are discussed. Design recommendations consist... Superseded Standard
693-2005 - Recommended Practice for Seismic Design of SubstationsAbstract: Seismic design recommendations for substations, including qualification of each equipment type, are discussed. Design recommendations... Active Standard
726-1982 - Standard Real-Time BASIC for CAMAC (Computer Automated Measurement and Control)Real-time BASIC for CAMAC is ANSI standard real-time BASIC in which the declarations and real-time statements are defined for use with CAMAC... Active Standard
730-1989 - Software Quality Assurance PlansSuperseded Uniform minimum acceptable requirements for the preparation and content of Software Quality Assurance Plans (SQAPs) are provided. The... Superseded Standard
730-1998 - Software Quality Assurance PlansUniform, minimum acceptable requirements for the preparation and content of software quality assurance plans (SQAPs) are provided. This standard... Superseded Standard
730-2002 - Software Quality Assurance PlansThe standard specifies the format and content of software quality assurance plans. It meets the IEEE/EIA 12207.1 requirements for such plans. Superseded Standard
730-2014 - Software Quality Assurance ProcessesRequirements for initiating, planning, controlling, and executing the Software Quality Assurance processes of a software development or... Active Standard
739-1984 - Recommended Practice for Energy Conservation and Cost-Effective Planning in Industrial FacilitiesSuperseded by IEEE Std 739-1995 This recommended practice serves as an engineering guide for use in electrical design for energy conservation. It... Superseded Standard
739-1995 - Recommended Practice for Energy Management in Industrial and Commercial FacilitiesThis recommended practice serves as an engineering guide for use in electrical design for energy conservation. It provides a standard design... Active Standard
743-1984 - Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency CircuitsThe purpose of this standard is to establish functional requirements for measuring analog transmission characteristics of voice frequency... Superseded Standard
743-1995 - Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for TelecommunicationsPerformance requirements for test equipment that measures the analog transmission parameters of subscriber loops, message trunks, PBX trunks, and... Withdrawn Standard
746-1984 - Performance Measurements of A/D and D/A Converters for PCM Television Video CircuitsThis standard describes methods for measuring the performance of uniformly coded analog-to-digital (A/D) converters and digital-to-analog (D/A)... Withdrawn Standard
752-1986 - Functional Requirements for Methods and Equipment for Measuring the Performance of Tone Address Signal SystemsThis standard provides brief descriptions of applicable tone address signaling techniques and definitions of the related signaling parameters that... Withdrawn Standard
758-1979 - Standard Subroutines for Computer Automated Measurement and Control (CAMAC)This IEEE standard presents a recommended set of software subroutines for use with the CAMAC modular instrumentation and interface system of IEEE... Active Standard
762-1987 - Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and ProductivityThe standard is intended to aid the electric power industry in reporting and evaluating electric generating unit reliability, availability and... Superseded Standard
762-2006 - Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and ProductivityThis standard provides a methodology for the interpretation of electric generating unit performance data from various systems and to facilitate... Active Standard
790-1989 - Guide for Medical Ultrasound Field Parameter MeasurementsThis IEEE standard describes procedures for measuring medical ultrasound field parameters such as pressure, power and intensity. It is intended... Withdrawn Standard
792-1988 - Trial-Use Recommended Practice for the Evaluation of the Impulse Voltage Capability of Insulation Systems for AC Electric Machinery Employing Form-Wound Stator CoilsThis recommended practice outlines a test procedure for the evaluation of the impulse voltage capability of insulation systems of form-wound... Superseded Standard
Displaying results 281 - 320 of 943 - all results