Standard Icon

Industry Applications Standards

Displaying results 201 - 240 of 949
Standard Name
Status Help less all
299-2006 - Standard Method for Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at... Active Standard
299-1991 - Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of room-sized, high-performance electromagnetic... Superseded Standard
299-1997 - Standard Method for Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at... Superseded Standard
299.1-2013 - Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 mThis standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety... Active Standard
302-1969 - Standard Methods for Measuring Electromagnetic Field Strength for Frequencies Below 1000 MHz in Radio Wave PropagationStandard methods for the measurement of electromagnetic field strength in radiowave propagation are described in detail. These are for frequencies... Withdrawn Standard
303-1991 - Recommended Practice for Auxilary Devices for Motors in Class I, Groups A,B,C, and D, Division 2 LocationsInstallation procedures and wiring methods and materials are recommended in this IEEE standard. Termination housings, motor surge protection, and... Superseded Standard
303-2004 - Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 LocationsThis recommended practice applies to the application and installation procedures of auxiliary devices in or on electric rotating machines that are... Active Standard
304-1977 - Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current MachinesThis test procedure has been prepared to serve as a useful guide for the evaluation of insulation systems for direct-current machines and to... Withdrawn Standard
314-1971 - Standards Report on State of the Art of Measuring Unbalanced Transmission-Line ImpedanceThis document is concerned with reporting the state of the art of measuring impedance in distributed parameter coaxial waveguide systems,... Withdrawn Standard
315-1975 - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)A list of graphic symbols and class designation letters for use on electrical and electronics diagrams is provided. All of the symbols are... Active Standard
315A-1986 - Supplement to Graphic Symbols for Electrical and Electronics DiagramsGraphic symbols and information needed for use on electrical and electronic diagrams, which are internationally approved, are presented. Active Standard
319-1971 - Standard on Magnetostrictive Materials: Piezomagnetic NomenclatureThe purpose of this Standard is to make possible the comparison of the relative merits of magnetostrictive, electromagnetic, piezoelectric, and... Superseded Standard
319-1990 - Standard on Magnetostrictive Materials: Piezomagnetic NomenclatureThis standard serves to aid the comparison of the relative merits of magnetostrictive, electromagnetic, piezoelectric, and electrostrictive... Withdrawn Standard
333-1980 - Electrical Installation of Packaging Machinery and Associated EquipmentThe purpose of this standard is to provide guidelines for the proper application of electrical equipment to packaging machinery. These guidelines... Withdrawn Standard
336-2005 - Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis guide provides considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control... Superseded Standard
336-1985 - Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis standard sets forth the requirements for installation, inspection, and testing of power, instrumentation, and control equipment and systems... Superseded Standard
336-2010 - Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesConsiderations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and... Active Standard
356-1974 - Guide for Radio Methods for Measuring Earth ConductivityThe guide presents a survey of radio techniques for measuring the electrical conductivity of the Earth. The results are applicable to the design... Withdrawn Standard
356-2001 - Guide for Measurements of Electromagnetic Properties of Earth MediaThe electromagnetic properties of the earth play an important role in the design and implementation of radio communications systems, geophysical... Superseded Standard
356-2010 - Guide for Measurements of Electromagnetic Properties of Earth MediaMeasurements of the electrical properties of naturally occurring solids are covered in the scope of this project. Not covered are methods that... Active Standard
367-1987 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultWire-line telecommunication facilities serving electric power stations often require that extraordinary protection measures be taken to protect... Superseded Standard
367-1996 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Superseded Standard
367-2012 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Active Standard
376-1975 - the Measurement of Impulse Strength and Impulse BandwidthFor many purposes in radio interference and electromagnetic compatibility work, it has become convenient to measure broadband emission in terms of... Withdrawn Standard
377-1980 - Recommended Practice for Measurement of Spurious Emission from Land-Mobile Communication TransmittersThis recommended practice covers definitions of terms, controlled test conditions, test apparatus, test methods and data presentation, all of... Active Standard
378-1986 - Standard on Network Analyzers (100 kHz to 18 GHz)This standard was written for users and manufacturers of automatic network analyzers. The purpose of the standard is to provide common terminology... Withdrawn Standard
386-2006 - Separable Insulated Connector Systems for Power Distribution Systems above 600 VDefinitions, service conditions, ratings, interchangeable construction features, and tests are established for loadbreak and deadbreak separable... Active Standard
386-1985 - Separable Insulated Connector Systems for Power Distribution Systems Above 600 VThis IEEE standard establishes definitions, service conditions, ratings, interchangeable construction features and tests for load-break and dead... Superseded Standard
386-1995 - Separable Insulated Connector Systems for Power Distribution Systems above 600 VIn this IEEE Standard, definitions, service conditions, ratings, interchangeable construction features, and tests are established for load-break... Superseded Standard
387-1984 - Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating StationsThe criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating stations is... Withdrawn Standard
387-1995 - Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating StationsThe criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating stations is... Active Standard
393-1977 - Test Procedures for Magnetic CoresMost of the test methods described include specific parameter ranges, instrument accuracies, core sizes, etc, and may be used in the specification... Superseded Standard
393-1991 - Test Procedures for Magnetic CoresTest methods useful in the design, analysis, and operation of magnetic cores in many types of applications are presented. Tests for specifying and... Active Standard
399-1980 - Recommended Practice for Power System Analysis (IEEE Brown Book)Superseded by 399-1990. This recommended practice is a reference source for engineers involved in industrial and commercial power systems analysis... Superseded Standard
399-1990 - Recommended Practice for Industrial and Commercial Power System AnalysisSuperseded by 399-1997. This recommended practice is a reference source for engineers involved in industrial and commercial power systems analysis... Superseded Standard
399-1997 - Recommended Practice for Industrial and Commercial Power Systems Analysis (Brown Book)This Recommended Practice is a reference source for engineers involved in industrial and commercial power systems analysis. It contains a thorough... Active Standard
400-1980 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldThe purpose of this guide is: to provide uniform procedures for performing high-direct-voltage acceptance tests and maintenance tests on power... Superseded Standard
400-1991 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldProcedures and recommended test voltage values for acceptance and maintenance high-direct-voltage testing of shielded power cable systems are set... Superseded Standard
Displaying results 201 - 240 of 949 - all results