Standard Icon

Industry Applications Standards

Displaying results 121 - 160 of 949
Standard Name
Status Help less all
95-2002 - Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct VoltageThis recommended practice provides information on the use of high direct voltage for proof tests and for periodic diagnostic tests on the... Active Standard
95-1977 - Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct VoltageSuperseded by 95-2002. Recommendations are made to aid in the selection of metric units, so as to promote uniformity in the use of metric units... Superseded Standard
96-1969 - General Principles for Rating Electric Apparatus for Short-Term, Intermittent, or Varying DutyThis standard establishes general principles for rating electric apparatus for short-time, intermittent, or varying duty. The four methods used... Withdrawn Standard
97-1969 - Recommended Practice for Specifying Service Conditions in Electrical StandardsThis document has been prepared as a guide for technical committees to use when standards are being prepared or revised, with the object of... Withdrawn Standard
98-1984 - the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating MaterialsPrinciples are given for the development of test procedures to evaluate the thermal endurance of solid electrical insulating materials and simple... Superseded Standard
98-2002 - the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating MaterialsPrinciples for the development of test procedures to evaluate the thermal endurance of solid electrical insulating materials in air are given in... Active Standard
99-1980 - Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electric EquipmentThe purpose of this recommended practice is to provide a general form for the preparation of test procedures and to suggest the points to be... Superseded Standard
99-2007 - Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical EquipmentA general form is provided for the preparation of test procedures. Points to be considered by technical committees in the preparation of specific... Active Standard
100-1992 - The New Standards Dictionary of Electrical and Electronics TermsOver 30,000 terms and definitions that have been standardized by IEEE are included. Over 10,000 new and revised terms have been added since 1988.... Superseded Standard
112-1984 - Standard Test Procedure for Polyphase Induction Motors and GeneratorsCovers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics... Superseded Standard
112-1991 - Standard Test Procedure for Polyphase Induction Motors and GeneratorsInstructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance... Superseded Standard
112-1996 - Standard Test Procedure for Polyphase Induction Motors and GeneratorsInstructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance... Superseded Standard
112-2004 - Standard Test Procedure for Polyphase Induction Motors and GeneratorsInstructions for conducting, reporting the more generally applicable, acceptable tests of polyphase induction motors, generators are covered. Active Standard
113-1985 - Guide: Test Procedures for Direct-Current MachinesRecommendations are made for conducting and reporting generally acceptable tests to determine the performance characteristics of conventional DC... Withdrawn Standard
114-2001 - Standard Test Procedure for Single-Phase Induction MotorsInstructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance... Withdrawn Standard
114-1982 - Standard Test Procedure for Single-Phase Induction MotorsThis standard covers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance... Withdrawn Standard
114-2010 - Standard Test Procedure for Single-Phase Induction MotorsInstructions for conducting and reporting the more generally applicable and acceptable test to determine the performance characteristics of single... Active Standard
115-1983 - Guide: Test Procedures for Synchronous MachinesContains instructions for conducting the more generally applicable and accepted tests to determine the performance characteristics of synchronous... Superseded Standard
115-1995 - (Superseded) Guide: Test Procedures for Synchronous Machines Part I--Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic AnalysisInstructions for conducting the more generally applicable and accepted tests to determine the performance characteristics of synchronous machines... Superseded Standard
115-2009 - Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic AnalysisInstructions for conducting generally applicable and accepted tests to determine the performance characteristics of synchronous machines are... Active Standard
115A-1987 - Standard Procedures for Obtaining Synchronous Machine Parameters by Standstill Frequency Response TestingA method is described for obtaining synchronous machine parameters in the form of reactances and time constants. A new approach has demonstrated... Superseded Standard
116-1975 - Standard Test Procedures for Carbon BrushesIt is the purpose of this standard to provide a procedure for determining certain operating characteristics of carbon, carbon-graphite,... Withdrawn Standard
117-1974 - Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric MachineryUseful methods for the evaluation of systems of insulation for random-wound stators of rotating electric machines are given. The chief purpose is... Withdrawn Standard
118-1978 - Standard Test Code for Resistance MeasurementThe purpose of this code is to present methods of measuring electrical resistance which are commonly used to determine the characteristics of... Withdrawn Standard
119-1974 - Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical ApparatusThe purpose of this document is to provide guidelines for the application of temperature-measurement techniques in measuring the operating... Withdrawn Standard
120-1955 - Elec Msmts/Power CircuitsSuperseded by IEEE 120-1989 The methods given here include measurements, as made with either indicating or integrating instruments, of power,... Superseded Standard
120-1989 - Master Test Guide for Electrical Measurements in Power CircuitsThis guide gives instructions for those measurements of electrical quantities that are commonly needed in determining the performance... Active Standard
122-1985 - Recommended Practice for Functional Performance Characteristics of Control Systems for Steam Turbine-Generator UnitsThe object of this IEEE recommended practice is to recommend minimum functional and performance characteristics related to speed/load control... Superseded Standard
122-1991 - Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator UnitsMinimum functional and performance characteristics related to speed/load-control systems for steam turbine-generator units that may be... Withdrawn Standard
139-1988 - Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's PremisesDescribes equipment inspection and radio frequency (RF) electromagnetic field measurement procedures for evaluation of RF industrial, scientific,... Active Standard
141-1986 - Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an... Superseded Standard
141-1993 - Recommended Practice for Electric Power Distribution for Industrial PlantsA thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an... Active Standard
142-1982 - Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book)The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered... Superseded Standard
142-1991 - Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered... Superseded Standard
142-2007 - Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered... Active Standard
152-1991 - Audio Program Level MeasurementTwo audio program level measuring devices, the peak-program meter and the standard volume indicator, are described. The peak-program meter is... Withdrawn Standard
Displaying results 121 - 160 of 949 - all results