Standard Icon

Industry Applications Standards

Displaying results 81 - 120 of 941
Standard Name
Status Help less all
142-1991 - Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered... Superseded Standard
142-2007 - Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered... Active Standard
148-1959 - Waveguide and Waveguide Component MeasurementsThis standard is concerned with measurements of the quantities which characterize a waveguide or waveguide component and the associated... Withdrawn Standard
152-1991 - Audio Program Level MeasurementTwo audio program level measuring devices, the peak-program meter and the standard volume indicator, are described. The peak-program meter is... Withdrawn Standard
176-1987 - Standard on PiezoelectricityThis standard on piezoelectricity contains many equations based upon the analysis of vibrations in piezoelectric materials having simple... Withdrawn Standard
177-1966 - Standard Definitions and Methods of Measurements for Piezoelectric VibratorsAn introductory review of the equivalent electric circuit of a piezoelectric vibrator and its parameters is followed by a discussion of the... Withdrawn Standard
180-1986 - Standard Definitions of Primary Ferroelectric TermsCompared to some of the older areas of specialization found within the IEEE organization, ferroelectrics is a relatively new field. The first... Withdrawn Standard
181-1977 - Standard on Pulse Measurement and Analysis by Objective TechniquesThis standard provides definitions and descriptions of the techniques and procedures for time domain pulse measurements. The definitions and... Withdrawn Standard
181-2003 - Standard on Transitions, Pulses, and Related WaveformsThis standard presents approximately 100 terms, and their definitions, for accurately and precisely describing the waveforms of pulse signals and... Superseded Standard
181-2011 - Transitions, Pulses, and Related WaveformsApproximately 100 terms and their definitions, for accurately and precisely describing the waveforms of pulse signals and the process of measuring... Active Standard
187-1990 - Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast ReceiversSpurious radiations from the local oscillator of modern broadcast radio receivers of the superheterodyne type are possible sources of interference... Superseded Standard
187-2003 - Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9kHz to 40GHzIEEE Std 187-2003 is the standard for measurement methods of emissions from FM and television broadcast receivers in the frequency range of 9 kHz... Active Standard
205-1958 - Standards on Television: Measurement of Luminance Signal LevelsDescribes methods of measuring the significant amplitude levels of a monochrome or color television signal, either composite or noncomposite. The... Withdrawn Standard
205-2001 - Standard on Television: Measurement of Luminance Signal LevelsA method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned... Withdrawn Standard
206-1960 - Standards on Television: Measurement of Differential Gain and Differential PhaseDescribes a method for measuring differential gain and differential phase in equipment transmitting either monochrome or color television signals.... Withdrawn Standard
208-1960 - Standards on Video Techniques: Measurement of Resolution of Camera Systems, 1961This standard is a revision of Part II of 50 IRE23.S1, and replaces it in all respects. One of the major characteristics of a television system... Withdrawn Standard
208-1995 - Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 TechniquesThe methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the... Active Standard
213-1987 - Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power LinesTelevision and FM broadcast receivers are frequently potential sources of interference to other television and FM broadcast receivers and to... Withdrawn Standard
241-1990 - Recommended Practice for Electric Power Systems in Commercial BuildingsA guide and general reference on electrical design for commercial buildings is provided. It covers load characteristics; voltage considerations;... Active Standard
242-1986 - Recommended Practice for Protection and Coordination of Industrial and Commercial Power SystemsSuperseded Standard. This publication presents a step-by-step, simplified, yet comprehensive, form the principles of system protection and the... Superseded Standard
242-2001 - Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)The principles of system protection and the proper selection, application, and coordination of components that may be required to protect... Active Standard
251-1984 - Standard Test Procedures for Direct-Current Tachometer GeneratorsThis test procedure covers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the... Withdrawn Standard
252-1977 - Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic GapThis test procedure covers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the... Superseded Standard
252-1995 - Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic GapIn this IEEE Standard instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance... Active Standard
260-1978 - Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)Close cooperation of committees of the International Electrotechnical Commission, the International Organization for Standardization, and the SUN... Superseded Standard
260.1-1993 - American National Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)General principles of letter symbol standardization are discussed. Symbols are given for general use and for use with limited character sets. The... Superseded Standard
260.1-2004 - Standard Letter Symbols for Units of Measurement (SI Customary Inch-Pound Units, and Certain Other Units)Letter symbols for units of measurement are covered in this standard. It does not include abbreviations for technical terms, nor does it cover... Active Standard
269-1992 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone SetsPractical methods for measuring the transmission characteristics of both digital and conventional two-wire analog telephone sets by means of... Superseded Standard
269-2002 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets... Superseded Standard
269-2010 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets and headsets.... Active Standard
269a-2007 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets Amendment 1This document amends IEEE Std 269-2002. It covers the areas of: analog telephones; digital telephones; electroacoustic measurements on telephones;... Superseded Standard
269a-2012 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets--Amendment 1Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets... Active Standard
275-1992 - Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and BelowIn this standard a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is... Withdrawn Standard
277-1994 - Recommended Practice for Cement Plant Power DistributionElectrical distribution systems in cement plants that would result in satisfactory equipment utilization, reliability, performance, safety, and... Superseded Standard
Displaying results 81 - 120 of 941 - all results