Standard Icon

Industry Applications Standards

Displaying results 921 - 949 of 949
Standard Name
Status Help less all
C63.4-2000 - Interim Standard Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical... Superseded Standard
C63.4-2009 - American National Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical... Superseded Standard
C63.5-2006 - American National Electromagnetic CompatibilityRadiated Emission Measurements in Electromagnetic Interference (EMI) ControlCalibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Active Standard
C63.5-2004 - American National Electromagnetic CompatibilityRadiated Emission Measurements in Electromagnetic Interference (EMI) ControlCalibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Active Standard
C63.5-1998 - American National Calibration of Antennas Used for Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Active Standard
C63.6-1988 - American National Standard Guide for the Computation of Errors in Open-Area Test Site MeasurementsShows the basis for the acceptability criterion of +or-14 dB for the site attenuation measurements required in ANSI C63.4-1988. This covers... Active Standard
C63.6-1996 - American National Standard Guide for the Computation of Errors in Open-Area Test Site MeasurementsThe basis for the acceptability criterion of /spl plusmn/4 dB for the site attenuation measurements required in ANSI C63.4-1992 is provided. Active Standard
C63.7-2005 - Standard Guide for Construction of Open Area Test Sites for Performing Radiated Emission MeasurementsInformation that is useful in constructing an open-area test site used to perform radiated emission measurements in the frequency range of 30 MHz... Active Standard
C63.7-1992 - American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission MeasurementsInformation that is useful in constructing an open-area test site (OATS) used to perform radiated emission measurements in the frequency range of... Active Standard
C63.011-2000 - American National Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency EquipmentThis standard republishes CISPR 11:1997 (with Amendment 1, 1999-05) as an American National Standard to make it easily available to U.S.... Active Standard
C63.15-2010 - American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic EquipmentThis immunity measurement and measurement instrumentation specification document complements the recommended procedures for making emission... Active Standard
C63.17-2006 - American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) DevicesSpecific test procedures are established for verifying the compliance of unlicensed personal communications services (UPCS) devices with... Superseded Standard
C63.19-2007 - American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. American national... Active Standard
C63.19-2001 - American National Methods of Measurement of Capatibility between Wireless Communication Devices and Hearing AidsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth in this standard. Active Standard
C63.19-2006 - Method of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Active Standard
C63.022-1996 - American National Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology EquipmentEmission limits are provided that are an are acceptable alternative for limits of the current issue of FCC Part 15, Subpart B, for Information... Active Standard
C63.22-2004 - American National Standard Guide for Automated Electromagnetic Interference MeasurementsU.S. consensus guideline for automation of conducted and radiated EMI compliance measurements is provided in this guide. This document does not... Active Standard
C92.2-1987 - American National Power Systems - Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal-Preferred Voltage RatingsThe article presents ANSI standard C92.2-1987. This standard supersedes ANSI C92.2-1981, preferred voltage ratings for alternating-current... Superseded Standard
C95.3-2002 - Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHzTechniques and instrumentation for the measurement and computation of potentially hazardous electromagnetic (EM) fields both in the near field and... Active Standard
C95.3-1991 - Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and MicrowaveIEEE Std C95.3-1991 specifies techniques and instrumentation for the measurement of potentially hazardous electromagnetic fields. The... Superseded Standard
C95.3.1-2010 - Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 100 kHzTechniques and instrumentation for the measurement and computation of electric, magnetic, and electromagnetic (EM) fields in the near field of an... Active Standard
C95.5-1981 - American National Standard Recommended Practice for the Measurement of Hazardous Electromagnetic Fields - RF and MicrowaveThis recommended practice describes techniques and procedures for the measurement of potentially hazardous electromagnetic fields both in the near... Superseded Standard
N42.14-1978 - American National Standard Calibration and Usage of Germanium Detectors for Measurement of Gamma-Ray Emission of RadionuclidesThis standard establishes methods for calibration and usage of germanium detectors for the measurement of gamma-ray emission rates of... Superseded Standard
N42.14-1999 - American National Calibration and use of germanium spectrometers for the measurement of gamma-ray emission rates of radionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.14-1991 - American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of RadionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.23-1996 - American National Standard Measurement and Associated Instrumentation Quality Assurance for Radioassay LaboratoriesA framework that can be used to create a national or an organizational NIST-traceable measurement quality assurance (MQA) program that will... Active Standard
N42.28-2002 - American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray MeasurementsThe need for accurately measuring radioactivity in-situ for a variety of detector characterization techniques requires that performance criteria... Active Standard
N42.31-2003 - American National Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing RadiationStandard measurement and test procedures are established for wide-bandgap semiconductor detectors such as cadmium telluride (CdTe), cadmium-zinc... Active Standard
Y32.9-1972 - Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building ConstructionThis standard provides a basis for showing the general physical location and arrangement of the sections of the required wiring system, and... Active Standard
Displaying results 921 - 949 of 949 - all results