Standard Icon

Industry Applications Standards

Displaying results 881 - 920 of 949
Standard Name
Status Help less all
C57.115-1991 - Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65C Winding Rise) (Folded into C57.91-1995) (65C Winding Rise)The guide covers modern power transformers rated above 100 MVA, three-phase equivalent and 65 degrees C rise. The general approach is tutorial.... Withdrawn Standard
C57.120-1991 - Loss Evaluation Guide for Power Transformers and ReactorsIn this standard a method for establishing the dollar value of the electric power needed to supply the losses of a transformer or reactor is... Active Standard
C57.121-1989 - Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Fluid in TransformersThis standard covers the evaluation and handling procedures for less-flammable hydrocarbon transformer insulating fluids. Its purpose is to assist... Superseded Standard
C57.121-1998 - Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in TransformersThe evaluation and handling procedures for less flammable hydrocarbon power transformer insulating fluids are covered. The guide's purpose is to... Active Standard
C57.123-2002 - Guide for Transformer Loss MeasurementInformation and general recommendations of instrumentation, circuitry, calibration, and measurement techniques of no-load losses (excluding... Superseded Standard
C57.123-2010 - Guide for Transformer Loss MeasurementInformation and general recommendations of instrumentation, circuitry, calibration, and measurement techniques of no-load losses (excluding... Active Standard
C57.124-1991 - Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type TransformersIEEE Std C57.124-1991 covers the detection of partial discharges occurring in the insulation of dry-type transformers of their components and the... Active Standard
C62.1-1989 - Gapped Silicon-Carbide Surge Arresters for AC Power CircuitsThis standard applies to gapped silicon-carbide surge-protective devices designed for the repeated limiting of voltage surges on 50 Hz or 60 Hz... Withdrawn Standard
C62.2-1987 - Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current SystemsThis standard covers the application of gapped silicon-carbide surge arresters to safeguard electric power equipment against the hazards of... Withdrawn Standard
C62.11-2005 - Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV)This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (... Superseded Standard
C62.11-1987 - Metal-Oxide Surge Arresters for AC Power CircuitsThe standard applies to metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz AC power circuits by passing... Superseded Standard
C62.11-1993 - Metal-Oxide Surge Arresters for Alternating Current Power CircuitsMetal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits by passing surge discharge current... Superseded Standard
C62.11-1999 - Metal-Oxide Surge Arresters for Alternating Current Power Circuits (>1KV)Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48-62 Hz power circuits (>1 kV) are covered in this standard. These... Superseded Standard
C62.11-2012 - Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (􀀡 1000 V) by... Active Standard
C62.22-1991 - Guide for the Application of Metal Oxide Surge Arresters for AC SystemsIn this standard, the application of metal-oxide surge arresters to safeguard electric power equipment against the hazards of abnormally high... Superseded Standard
C62.22-1997 - Guide for Application of Metal-Oxide Surge Arresters for Alternating-Current SystemsThe application of metal-oxide surge arresters to safeguard electric power equipment against the hazards of abnormally high voltage surges of... Superseded Standard
C62.22-2009 - Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current SystemsThis guide covers the application of metal-oxide surge arresters to safeguard electric power equipment, with a nominal operating voltage 1000 V... Active Standard
C62.22.1-1996 - Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable SystemsThis guide suggests surge arrester installation methods at distribution cable terminal poles in order to minimize the total impressed transient... Active Standard
C62.36-1991 - Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling CircuitsMethods are established for testing and measuring the characteristics of surge protectors used in low-voltage data, communications, and signaling... Superseded Standard
C62.36-1994 - Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling CircuitsMethods are established for testing and measuring the characteristics of surge protectors used in low-voltage data, communications, and signaling... Superseded Standard
C62.36-2000 - Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling CircuitsMethods for testing and measuring the characteristics of surge protectors used in low-voltage data, communications, and signaling circuits with... Superseded Standard
C62.41-1980 - Guide for Surge Voltages in Low-Voltage AC Power CircuitsThis IEEE guide for surge voltages in LV AC power circuits addresses circuits with rated voltages up to 277 V line to ground. The main purpose of... Superseded Standard
C62.41-1991 - Recommended Practice for Surge Voltages in Low-Voltage AC Power CircuitsA practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of... Superseded Standard
C62.41.1-2002 - Guide on the Surge Environment in Low-Voltage (1000 V and less) AC Power CircuitsThis is a guide describing the surge voltage, surge current, and temporary overvoltages (TOV) environment in low-voltage [up to 1000 V root mean... Active Standard
C62.41.2-2002 - Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and less) AC Power CircuitsThe scope of this recommended practice is to characterize the surge environment at locations on AC power circuits described in IEEE Std C62.41.1... Active Standard
C62.45-2002 - Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and less) AC Power CircuitsThe scope of this recommended practice is the performance of surge testing on electrical and electronic equipment connected to low-voltage ac... Active Standard
C62.45-1987 - Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power CircuitsThis document provides guidance on surge testing AC power interfaces of equipment connected to low-voltage circuits that are subject to transient... Superseded Standard
C62.45-1992 - Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power CircuitsGuidance is provided for applying surge testing to ac power interfaces of equipment connected to low-voltage ac power circuits that are subject to... Superseded Standard
C62.92-1987 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 - IntroductionSome basic considerations for the selection of neutral grounding parameters that will provide for the control of ground-fault current and... Superseded Standard
C62.92.1-2000 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 - IntroductionThis guide is the introduction to the C62.92 series of five IEEE guides on neutral grounding in three-phase electrical utility systems. It... Active Standard
C62.92.3-1993 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III - Generator Auxiliary SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power... Superseded Standard
C62.92.3-2012 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power... Active Standard
C62.92.4-1991 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV-DistributionIn this standard the neutral grounding of singleand three-phase AC electric utility primary distribution systems with nominal voltages in the... Active Standard
C62.92.5-1992 - Guide for the Application of Neutral Grounding in Electric Utility Systems, Part V - Transmission Systems and Subtransmission SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for a particular AC transmission or subtransmission... Superseded Standard
C62.92.5-2009 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or subtransmission... Active Standard
C63.4-1988 - American National Standard Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 10 kHz to 1GHzUniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other... Superseded Standard
C63.4-1991 - American National Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzThis standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including... Active Standard
C63.4-1992 - Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzUniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other... Active Standard
C63.4-2003 - Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical... Active Standard
Displaying results 881 - 920 of 949 - all results