Standard Icon

Industry Applications Standards

Displaying results 761 - 800 of 949
Standard Name
Status Help less all
C37.90-1989 - Relays and Relay Systems Associated with Electric Power ApparatusThis standard applies only to relays and relay systems used to protect and control power apparatus. The purpose of this standard is to specify... Superseded Standard
C37.90.1-1974 - Standard Surge Withstand Capability Test For Proctective Relays and Relay SystemsThe development of the transistor resulted in semiconductor components being used in both relay and communication equipment. However, it was... Superseded Standard
C37.90.1-1989 - Standard Surge Withstand Capability (SWC) Tests for Protective Relays and Relay SystemsThese surge withstand capability (SWC) tests are design tests intended for protective relays and relay systems, including those incorporating... Superseded Standard
C37.90.1-2002 - Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power ApparatusTwo types of design tests for relays and relay systems that relate to the immunity of this equipment to repetitive electrical transients are... Superseded Standard
C37.90.1-2012 - Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power ApparatusTwo types of design tests for relays and relay systems that relate to the immunity of this equipment to repetitive electrical transients are... Active Standard
C37.90.2-2004 - Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversDesign tests for relays and relay systems that relate to the immunity of this equipment to Radiated Electromagnetic Interference from Transceivers... Active Standard
C37.90.2-1987 - Trial-Use Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversEstablishes a common reference and test procedure for evaluating the performance of static protective and control relays used in electric power... Superseded Standard
C37.90.2-1995 - Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversA design test to evaluate the susceptibility of protective relays to single-frequency electromagnetic fields in the radio frequency domain, such... Superseded Standard
C37.90.3-2001 - Standard Electrostatic Discharge Tests for Protective RelaysThis standard describes test procedure, test point selection, test level, and acceptance criteria for repeatable electrostatic discharge immunity... Active Standard
C37.91-2000 - Guide for Protective Relay Applications to Power TransformersThe protection of power transformers is covered; various electrical protection schemes are explored; and guidelines are given for the application... Superseded Standard
C37.91-2008 - Guide for Protecting Power TransformersThis guide is intended to provide protection engineers and other readers with guidelines for protecting three-phase power transformers of more... Active Standard
C37.95-1989 - Guide for Protective Relaying of Utility-Consumer InterconnectionsThis report contains information on a number of different protective relaying practices for the utility-consumer interconnection. It is intended... Superseded Standard
C37.95-2002 - Guide for Protective Relaying of Utility-Consumer InterconnectionsProtective relay applications involving electric service to consumers that requires a transformation between the utility's supply voltage and the... Superseded Standard
C37.95-2014 - Approved Draft Guide for Protective Relaying of Utility-Consumer InterconnectionsThis guide applies to protective relay applications involving electric service to consumers that requires a transformation between the utility’s... Active Standard
C37.96-1988 - Guide for AC Motor ProtectionThis IEEE guide for the relay protection of squirrel-cage and wound-rotor induction motors and synchronous motors presents a review of the... Withdrawn Standard
C37.96-2000 - Guide for AC Motor ProtectionGenerally accepted methods of protection for AC motors are provided. This guide identifies and summarizes the functions necessary for adequate... Superseded Standard
C37.96-2012 - Guide for AC Motor ProtectionGenerally accepted methods of protection for ac motors are provided. The functions necessary for adequate protection of motors based on type, size... Active Standard
C37.97-1979 - Guide for Protective Relay Applications to Power System BusesA bus is a critical element of a power systems, as it is the point of convergence of many circuits-transmission, generation, or loads. Factors... Withdrawn Standard
C37.99-1980 - Guide for Protection of Shunt Capacitor BanksThis guide has been prepared to assist in the effective application of relays and other devices for the protection of shunt capacitors used in... Superseded Standard
C37.99-1990 - Guide for the Protection of Shunt Capacitor BanksThis guide has been prepared to assist in the effective application of relays and other devices for the protection of shunt capacitors used in... Superseded Standard
C37.99-2000 - Guide for the Protection of Shunt Capacitor BanksThe protection of shunt power capacitor, filter banks are covered. Guidelines for reliable applications of protection methods intended for use in... Superseded Standard
C37.100-1992 - Standard Definitions for Power SwitchgearIn this standard, terms that encompass the products with the scope of the C37 project are defined. These include power switchgear for switching,... Active Standard
C37.100-1992 - standard definitions for power switchgearIn this standard, terms that encompass the products with the scope of the C37 project are defined. These include power switchgear for switching,... Active Standard
C37.100d-1991 - Supplement to C37.100-1981, Standard Definitions for Power SwitchgearSupplement to IEEE C37.100-1981. Add definition "Initial Transient Recovery Voltage". Terms that encompass the products with the scope of the C37... Superseded Standard
C37.101-1993 - Guide for Generator Ground ProtectionGuidance in the application of relays and relaying schemes for protection against stator ground faults on high-impedance grounded generators is... Superseded Standard
C37.101-1985 - Guide for Generator Ground ProtectionGuidance in the application of relays and relaying schemes for protection against stator ground faults on high-impedance grounded generators is... Superseded Standard
C37.101-2006 - Guide for Generator Ground ProtectionThe guide is intended to assist protection engineers in applying relays and relaying schemes for protection against stator ground faults on... Active Standard
C37.102-2006 - Guide for AC Generator ProtectionA review of the generally accepted forms of relay protection for the synchronous generator and its excitation system is presented. This guide is... Active Standard
C37.102-1987 - Guide for AC Generator ProtectionThe guide for the relay protection of synchronous generators presents a review of the generally accepted forms of protection for the generator and... Superseded Standard
C37.102-1995 - Guide for AC Generator ProtectionIn this IEEE standard a review of the generally accepted forms of relay protection for the synchronous generator and its excitation system is... Superseded Standard
C37.103-1990 - Guide for Differential and Polarizing Relay Circuit TestingThe following topics were dealt with: IEEE C37.103-1990, IEEE Guide for Differential and Polarizing Relay Circuit Testing, covers the testing and... Withdrawn Standard
C37.103-2004 - Guide for Differential and Polarizing Relay Circuit TestingThe issues concerning testing and verification of the correctness of differential and polarizing circuits are described and discussed in this... Active Standard
C37.108-1989 - Guide for the Protection of Network TransformersNetwork transformer vaults are fire retardant enclosures within buildings or adjacent to them that contain two or more power transformers. These... Superseded Standard
C37.108-2002 - Guide for the Protection of Network TransformersGuidelines for the application of network protectors are established. The use of network transformers and protectors with distributed resources is... Active Standard
C37.111-1991 - Standard Common Format for Transient Data Exchange (COMTRADE) for Power SystemsIn this standard a common format for the data files and exchange medium needed for the interchange of various types of fault, test, or simulation... Superseded Standard
C37.111-1999 - Standard Common Format for Transient Data Exchange (COMTRADE) for Power SystemsA common format for data files and exchange medium used for the interchange of various types of fault, test, or simulation data for electrical... Superseded Standard
C37.111-2013 - /IEC Measuring relays and protection equipment – Part 24: Common format for transient data exchange (COMTRADE) for power systemsAlso known as IEC 60255-24 Ed.2, this standard defines a format for files containing transient waveform and event data collected from power... Active Standard
Displaying results 761 - 800 of 949 - all results