Standard Icon

Industry Applications Standards

Displaying results 601 - 640 of 949
Standard Name
Status Help less all
1584.1-2013 - Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584... Active Standard
1584a-2004 - Guide for Performing Arc-Flash Hazard Calculations--Amendment 1This amendment provides additions and corrections to IEEE Std 1584-2002. Active Standard
1588-2002 - a Precision Clock Synchronization Protocol for Networked Measurement and Control SystemsA protocol to synchronize independent clocks running on separate nodes of a distributed measurement and control system to a high degree of... Superseded Standard
1588-2008 - a Precision Clock Synchronization Protocol for Networked Measurement and Control SystemsA protocol is provided in this standard that enables precise synchronization of clocks in measurement and control systems implemented with... Active Standard
1594-2008 - Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility LinesThis standard covers an all-dielectric fiber optic (wrap) cable designed to be helically wrapped around a conductor or other messenger on overhead... Active Standard
1610-2007 - Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, Three-phase Underground DistributionThis application guide provides information on what a FCI is designed to do and describes methods for selecting FCIs for three-phase, 200 / 600... Active Standard
1617-2007 - Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground CablesThis guide provides a summary of the methods for detection, mitigation, and control of concentric neutral corrosion in medium-voltage, unjacketed,... Active Standard
1624-2008 - Organizational Reliability CapabilityOrganizational reliability capability and the identification of the criteria for assessing the reliability capability of an organization are defined. Active Standard
1631-2008 - Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USAThis recommended practice provides a standardized body of theory, techniques, and procedures for measuring the spectral characteristics of 8-VSB... Active Standard
1637-2010 - Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV - 46 kVA step-by-step process for selecting an appropriate termination that is commensurate with a particular shielded power cable design is provided in... Active Standard
1641-2004 - Signal and Test DefinitionThis standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, mathematically... Superseded Standard
1641-2010 - Signal and Test DefinitionThis standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, built upon formal... Active Standard
1647-2006 - the Functional Verification Language 'e'The e functional verification language is an application-specific programming language, aimed at automating the task of verifying an electronic... Superseded Standard
1647-2008 - the Functional Verification Language eThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hardware or... Superseded Standard
1647-2011 - the Functional Verification Language eThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hardware or... Active Standard
1650-2005 - Standard Test Methods for Measurement of Electrical Properties of Carbon NanotubesRecommended methods and standardized reporting practices for electrical characterization of carbon nanotubes (CNTs) are covered. Due to the nature... Active Standard
1652-2008 - the Application of Free Field Acoustic Reference to Telephony MeasurementsThis standard provides the techniques and rationale for referencing acoustic telephony measurements to the free field. It applies to ear related... Active Standard
1662-2008 - Guide for the Design and Application of Power Electronics in Electrical Power Systems on ShipsThis guide applies to power electronics components and systems on ships and similar applications. It summarizes current electrical engineering... Active Standard
1666-2005 - Standard SystemC(R) Language Reference ManualSystemC is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers and... Superseded Standard
1685-2009 - IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsConformance checks for extensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. The meta... Active Standard
1709-2010 - Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on ShipsGuidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of... Active Standard
1718-2012 - Guide for Temperature Monitoring of Cable SystemsThe various existing technologies that are used or can be used to monitor the temperature of cable systems are reviewed in this guide. The... Active Standard
1720-2012 - Recommended Practice for Near-Field Antenna MeasurementsNear-field test practices for the measurement of antenna properties are described in this document and near-field measurement practices for the... Active Standard
1727-2013 - Guide for Working Procedures on Underground Transmission Circuits with Induced VoltageInduced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized... Active Standard
1734-2011 - Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) DesignsA standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model for IP... Active Standard
1775-2010 - Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement MethodsElectromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication... Active Standard
1776-2008 - Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and BelowA test procedure (Combination of IEEE Std 275™-1992 and IEEE Std 429™-1994) for comparing two or more insulation systems in accordance with their... Active Standard
1793-2012 - Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission LinesCareful consideration of the physical and electrical characteristics of overhead lines and transmission cables are necessary in designing a... Active Standard
1800-2005 - SystemVerilog: Unified Hardware Design, Specification and Verification LanguageThis standard provides a set of extensions to the IEEE 1364 Verilog hardware description language (HDL) to aid in the creation and verification of... Superseded Standard
1800-2009 - SystemVerilog--Unified Hardware Design, Specification, and Verification LanguageThis standard represents a merger of two previous standards: IEEE Std 1364(TM)-2005 Verilog hardware description language (HDL) and IEEE Std 1800... Superseded Standard
1801-2009 - Design and Verification of Low Power Integrated CircuitsThe power supplied to elements in an electronic design affects the way circuits operate. Although this is obvious when stated, today's set of high... Superseded Standard
1850-2005 - Property Specification Language (PSL)The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system... Superseded Standard
1850-2010 - Property Specification Language (PSL)The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system... Active Standard
2003-1997 - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX StandardsThis standard defines the requirements and guidelines for test method specifications and test method implementations for measuring conformance to... Withdrawn Standard
2003.1-1992 - Test Methods for Measuring Conformance to POSIX(R)--Part1: System InterfacesIEEE Std 2003.1-1992 provides a definition of the requirements placed upon providers of POSIX test methods for POSIX.1 (IEEE Std 10031-1990; ISO... Withdrawn Standard
2003.1b-2000 - Test Methods Specifications for Measuring Conformance to POSIX(R) - Part 1: System Application Program Interface (API) -Amendment 1: Realtime Extension [C Language]This standard defines the test method specifications for IEEE Std 1003.1b-1993 [based on the document corresponding to the merger of IEEE Std 1003... Withdrawn Standard
2003.2-1996 - Test Methods for Measuring Conformance to POSIX(R) - Part II: Shell and UtilitiesA definition of the requirements placed upon providers of a POSIX . Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, IEEE... Withdrawn Standard
3001.8-2013 - Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power SystemsThis recommended practice covers the instrumentation and metering of industrial and commercial power systems. It describes the importance of... Active Standard
3006.7-2013 - Recommended Practice for Determining the Reliability of 7x24 Continuous Power Systems in Industrial and Commercial FacilitiesMethods for determining the reliability of 7×24 continuous power systems in industrial and commercial facilities are described in this recommended... Active Standard
3006.9-2013 - Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power SystemsCollection of data for use in reliability, availability, and maintainability assessments of industrial and commercial power systems is described... Active Standard
Displaying results 601 - 640 of 949 - all results