Standard Icon

Industry Applications Standards

Displaying results 561 - 600 of 941
Standard Name
Status Help less all
1637-2010 - Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV - 46 kVA step-by-step process for selecting an appropriate termination that is commensurate with a particular shielded power cable design is provided in... Active Standard
1641-2004 - Signal and Test DefinitionThis standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, mathematically... Superseded Standard
1641-2010 - Signal and Test DefinitionThis standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, built upon formal... Active Standard
1650-2005 - Standard Test Methods for Measurement of Electrical Properties of Carbon NanotubesRecommended methods and standardized reporting practices for electrical characterization of carbon nanotubes (CNTs) are covered. Due to the nature... Active Standard
1652-2008 - the Application of Free Field Acoustic Reference to Telephony MeasurementsThis standard provides the techniques and rationale for referencing acoustic telephony measurements to the free field. It applies to ear related... Active Standard
1662-2008 - Guide for the Design and Application of Power Electronics in Electrical Power Systems on ShipsThis guide applies to power electronics components and systems on ships and similar applications. It summarizes current electrical engineering... Active Standard
1668-2014 - Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 VA trial-use, non-industry-specific recommended practice for voltage sag and short interruption ride-through performance and compliance testing for... Active Standard
1682-2011 - Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating StationsThis standard provides general requirements, directions, and methods for qualifying fiber optic cables, connections, and optical fiber splices for... Active Standard
1683-2014 - Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical HazardsFunctional design recommendations and field practices for motor control centers (single- and three-phase 50 Hz and 60 Hz and dc) are provided in... Active Standard
1708-2014 - Wearable Cuffless Blood Pressure Measuring DevicesIEEE Std 1708™ establishes a normative definition of wearable cuffless blood pressure (BP) measuring devices and the objective performance... Active Standard
1709-2010 - Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on ShipsGuidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of... Active Standard
1716-2014 - Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical FacilitiesRecommendations and guidelines for managing natural disaster impact on key electrical facilities and systems in petroleum and chemical facilities... Active Standard
1717-2012 - Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test ProtocolStandardization of circuit integrity cable testing is beneficial to cable manufacturers, distributors, and users. Uniform procedures, consistent,... Active Standard
1718-2012 - Guide for Temperature Monitoring of Cable SystemsThe various existing technologies that are used or can be used to monitor the temperature of cable systems are reviewed in this guide. The... Active Standard
1720-2012 - Recommended Practice for Near-Field Antenna MeasurementsNear-field test practices for the measurement of antenna properties are described in this document and near-field measurement practices for the... Active Standard
1727-2013 - Guide for Working Procedures on Underground Transmission Circuits with Induced VoltageInduced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized... Active Standard
1727-2013/Cor 1-2015 - Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage -- Corrigendum 1Induced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized... Active Standard
1775-2010 - Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement MethodsElectromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication... Active Standard
1776-2008 - Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and BelowA test procedure (Combination of IEEE Std 275™-1992 and IEEE Std 429™-1994) for comparing two or more insulation systems in accordance with their... Active Standard
1793-2012 - Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission LinesCareful consideration of the physical and electrical characteristics of overhead lines and transmission cables are necessary in designing a... Active Standard
1816-2013 - Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating AccessoriesAccepted best industry practices for the preparation of extruded dielectric shielded medium voltage cables rated 2.5 kV through 46 kV for the... Active Standard
1826-2012 - Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kWOpen system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in... Active Standard
2003-1997 - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX StandardsThis standard defines the requirements and guidelines for test method specifications and test method implementations for measuring conformance to... Withdrawn Standard
2003.1-1992 - Test Methods for Measuring Conformance to POSIX(R)--Part1: System InterfacesIEEE Std 2003.1-1992 provides a definition of the requirements placed upon providers of POSIX test methods for POSIX.1 (IEEE Std 10031-1990; ISO... Withdrawn Standard
2003.1b-2000 - Test Methods Specifications for Measuring Conformance to POSIX(R) - Part 1: System Application Program Interface (API) -Amendment 1: Realtime Extension [C Language]This standard defines the test method specifications for IEEE Std 1003.1b-1993 [based on the document corresponding to the merger of IEEE Std 1003... Withdrawn Standard
2003.2-1997 - Test Methods for Measuring Conformance to POSIX(R) - Part II: Shell and UtilitiesA definition of the requirements placed upon providers of aPOSIXConformance Test Suite for thePOSIX.2 standard (ISO/IEC9945-2:1993,IEEE/ANSIStd.... Withdrawn Standard
3001.5-2013 - Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power SystemsThe selection and application of power distribution apparatus used in industrial and commercial power systems are covered in this recommended... Active Standard
3001.8-2013 - Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power SystemsThis recommended practice covers the instrumentation and metering of industrial and commercial power systems. It describes the importance of... Active Standard
3003.2-2014 - Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power SystemsThe grounding and bonding of equipment in industrial and commercial power systems is covered in this recommended practice. The interconnection and... Active Standard
3004.1-2013 - Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power SystemsThe selection and application of instrument transformers used in industrial and commercial power systems are covered in this recommended practice. Active Standard
3004.5-2014 - Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power SystemsInformation for selecting the proper circuit breaker for a particular application is provided. Application engineers are aided in specifying the... Active Standard
3006.5-2014 - Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power SystemsDescribed in this recommended practice are ways for using probability methods to conduct a reliability analysis of industrial and commercial power... Active Standard
3006.7-2013 - Recommended Practice for Determining the Reliability of 7x24 Continuous Power Systems in Industrial and Commercial FacilitiesMethods for determining the reliability of 7×24 continuous power systems in industrial and commercial facilities are described in this recommended... Active Standard
3006.9-2013 - Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power SystemsCollection of data for use in reliability, availability, and maintainability assessments of industrial and commercial power systems is described... Active Standard
3007.1-2010 - Recommended Practice for the Operation and Management of Industrial and Commercial Power SystemsRecommended practices for the numerous personnel who are responsible for safely operating and managing industrial and commercial electric power... Active Standard
3007.2-2010 - Recommended Practice for the Maintenance of Industrial and Commercial Power SystemsThis recommended practice covers the maintenance of industrial and commercial power systems. It covers the fundamentals of electrical equipment... Active Standard
3007.3-2012 - Recommended Practice for Electrical Safety in Industrial and Commercial Power SystemsAll aspects of electrical safety in industrial and commercial power systems are covered. This recommended practice provides personnel with... Active Standard
14143.1-2000 - Adoption of ISO/IEC 14143-1:1998 Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of ConceptsImplementation notes that relate to the IEEE interpretation of the ISO/IEC 14143-1:1998 standard are described. Withdrawn Standard
14515-1:2000 /Amd.1-2003 - ISO/IEC Portable Operating System Interface (POSIX(R)) -- Test methods for measuring conformance to POSIX -- Part 1: System interfaces -- Amendment 1: Realtime extension (C Language)This standard defines the test method specifications for IEEE Std 1003.b-1993 (based on the document corresponding to the merger of IEEE Std 1003... Active Standard
14515-2-2003 - ISO/IEC International Portable Operating System Interface (POSIX)--Test methods for measuring conformance to POSIX--Part 2:Shell and utilitiesA definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, IEEE/ANSI... Active Standard
Displaying results 561 - 600 of 941 - all results