Standard Icon

Industry Applications Standards

Displaying results 1 - 40 of 949
Standard Name
Status Help less all
1528-2013 - Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement TechniquesProtocols and test procedures are specified for the measurement of the peak spatial-average SAR induced inside a simplified model of the head of... Active Standard
45.7-2012 - Recommended Practice for Electrical Installations on Shipboard -- AC SwitchboardsRecommendations for the design, selection, and installation of switchboards on merchant vessels with electrical apparatus for lighting, signaling,... Active Standard
C63.23-2012 - American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement UncertaintyMethods for estimating measurement uncertainty of emissions measurement results are provided, for use in conjunction with the basic methods of... Active Standard
1234-2007 - Guide for Fault Locating Techniques on Shielded Power Cable SystemsTests and measurements that are performed on shielded power cables to identify the location of a fault are described. Whenever possible, the... Active Standard
433-2009 - Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low FrequencyThis recommended practice describes very low frequency withstand and diagnostic tests that are performed on the stator windings of ac electric... Active Standard
C57.12.10-2010 - Standard Requirements for Liquid-Immersed Power TransformersThis standard sets forth the requirements for power transformer application. This standard is intended to be used as a basis for performance,... Active Standard
1801-2013 - Design and Verification of Low-Power Integrated CircuitsA method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the design in... Active Standard
1511.1-2010 - Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kVThis guide covers specific methods of failure mode classifications and analysis for shielded power cables rated 5 kV through 46 kV. Active Standard
1076.1.1-2011 - VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain SupportThis standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1, along with recommendations for conforming use, in... Active Standard
C37.122.5-2013 - Guide for Moisture Measurement and Control in SF6 Gas-Insulated EquipmentGuidelines for moisture level measurement, moisture data interpretation, and moisture control in gas-insulated switchgear (GIS) are provided. Active Standard
269-2010 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets and headsets.... Active Standard
N42.47-2010 - American National Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of HumansThis standard applies to security screening systems that utilize x-ray or gamma radiation and are used to inspect people who are not inside... Active Standard
C37.47-2011 - Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting SwitchesSpecifications for high-voltage (>1000 V) distribution class current-limiting fuses and fuse disconnecting switches, and associated accessories... Active Standard
3001.5-2013 - Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power SystemsThe selection and application of power distribution apparatus used in industrial and commercial power systems are covered in this recommended... Active Standard
1127-2013 - Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental CompatibilitySignificant community acceptance and environmental compatibility items to be considered during the planning and design phases, the construction... Active Standard
C37.011-2011 - Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit BreakersProcedures and calculations necessary to apply the standard transient recovery voltage (TRV) ratings for ac high-voltage circuit breakers rated... Active Standard
C57.96-2013 - Guide for Loading Dry-Type Distribution and Power TransformersGeneral recommendations for the loading of dry-type distribution and power transformers installed in ventilated, non-ventilated, and sealed type... Active Standard
43-2013 - Recommended Practice for Testing Insulation Resistance of Electric MachineryThe dc voltage tests procedures for the measurement of the insulation resistance and polarization index of insulated stator, and rotor windings... Active Standard
450-2010 - Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary ApplicationsMaintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead... Active Standard
C57.12.00-2010 - General Requirements for Liquid-Immersed Distribution, Power, and Regulating TransformersElectrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers;... Active Standard
400.2-2013 - Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded... Active Standard
1666-2011 - Standard SystemC Language Reference ManualSystemC(R) is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers and... Active Standard
C62.36-2014 - Approved Draft Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling CircuitsThis standard applies to surge protectors for application on multiconductor balanced or unbalanced data, communications, and signaling circuits... Active Standard
1017-2013 - Recommended Practice for Field Testing Electric Submersible Pump CableProcedures and test voltage values for acceptance and maintenance testing of electric submersible pump (ESP) cable systems are presented. This... Active Standard
1018-2013 - Recommended Practice for Specifying Electric Submersible Pump Cable—Ethylene-Propylene Rubber InsulationMinimum requirements for the design, construction, manufacturing, testing, purchasing, and application of electric submersible pump (ESP) cable... Active Standard
1019-2013 - Recommended Practice for Specifying Electric Submersible Pump Cable—Polypropylene InsulationMinimum requirements for the design, construction, manufacturing, testing, purchasing, and application of electric submersible pump cable are... Active Standard
81-2012 - Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding SystemPractical test methods and techniques are presented for measuring the electrical characteristics of grounding systems. Topics addressed include... Active Standard
C37.118.1-2011 - Synchrophasor Measurements for Power SystemsSynchronized phasor (synchrophasor) measurements for power systems are presented. This standard defines synchrophasors, frequency, and rate of... Active Standard
C57.100-2011 - Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power TransformersA test procedure to provide a uniform method for investigating the effect of operating temperature on the life expectancy of liquid-immersed... Active Standard
1826-2012 - Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kWOpen system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in... Active Standard
1800-2012 - SystemVerilog--Unified Hardware Design, Specification, and Verification LanguageThe definition of the language syntax and semantics for SystemVerilog, which is a unified hardware design, specification, and verification... Active Standard
C57.12.44-2014 - Approved Draft Standard Requirements for Secondary Network ProtectorsThe performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment... Active Standard
1278.1-2012 - Distributed Interactive Simulation--Application ProtocolsData messages, known as Protocol Data Units (PDUs), that are exchanged on a network among simulation applications are defined. These PDUs are for... Active Standard
C37.10-2011 - Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker FailuresPractices and processes to perform, analyze, and report failure investigations of power circuit breakers are provided. Active Standard
C37.242-2013 - Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and ControlGuidance for synchronization, calibration, testing, and installation of phasor measurement units (PMUs) applied in power systems is provided. The... Active Standard
980-2013 - Guide for Containment and Control of Oil Spills in SubstationsThe significance of oil-spillage regulations and their applicability to electric supply substations are discussed; the sources of oil spills are... Active Standard
1222-2011 - Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power LinesThis standard covers the construction, mechanical, electrical and optical performance, installation guidelines, acceptance criteria, test... Active Standard
1349-2011 - Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) LocationsThree-phase and single-phase AC synchronous and induction electric motors in ratings 0.18 kW (1/4 hp) and larger are covered in this guide.... Active Standard
C57.12.91-2011 - Standard Test Code for Dry-Type Distribution and Power TransformersThis revision addresses substantive changes to Clause 5, 10 and 11 This revision addresses substantive changes to Clause 5, Clause 10, and Clause... Active Standard
Displaying results 1 - 40 of 949 - all results