Standard Icon

Batteries Standards

Displaying results 1 - 40 of 80
Standard Name
Status Help less all
1725-2011 - Rechargeable Batteries for Cellular TelephonesCriteria for design analysis for qualification, quality, and reliability of rechargeable lithium ion and lithium ion polymer batteries for... Active Standard
450-2010 - Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary ApplicationsMaintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead... Active Standard
400.2-2013 - Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded... Active Standard
1635-2012 - /ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary ApplicationsVented lead-acid (VLA), valve-regulated lead-acid (VRLA), and nickel-cadmium (NiCd) stationary battery installations are discussed in this guide,... Active Standard
738-2012 - Calculating the Current-Temperature Relationship of Bare Overhead ConductorsA method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along with a... Active Standard
422-2012 - Guide for the Design of Cable Raceway Systems for Electric Generating FacilitiesGuidance for the design and installation of cable raceway systems for all types of electric generating facilities is provided. Recommendations,... Active Standard
1491-2012 - Guide for Selection and Use of Battery Monitoring Equipment in Stationary ApplicationsOperational parameters that may be observed by battery monitoring equipment used in stationary applications and the relative value of such... Active Standard
535-2013 - Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating StationsQualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary... Active Standard
450-1972 - Recommended Practice for Maintenance, Testing, and Replacement of Large Stationary Type Power Plant and Substation Lead Storage BatteriesProper maintenance will prolong the life of a battery and will aid in assuring that it is capable of supplying its design power requirements. A... Superseded Standard
450-1975 - EEE Recommended Practice for Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and SubstationsLarge stationary lead storage batteries play an ever increasing role in substation and generating station control systems and in providing the... Superseded Standard
400-1980 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldThe purpose of this guide is: to provide uniform procedures for performing high-direct-voltage acceptance tests and maintenance tests on power... Superseded Standard
400-1991 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldProcedures and recommended test voltage values for acceptance and maintenance high-direct-voltage testing of shielded power cable systems are set... Superseded Standard
400-2001 - Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable SystemsThis guide lists the various field test methods that are currently available or under development with guidance on HOW to perform each test. The... Superseded Standard
400-2012 - Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and AboveVarious field test methods that are currently available or under development are listed in this guide. The guide covers shielded, insulated power... Active Standard
400.2-2004 - Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)This guide describes very low frequency (VLF) withstand and diagnostic tests and the measurements that are performed in the field on shielded... Superseded Standard
422-1986 - Guide for the Design and Installation of Cable Systems in Power Generating StationsThis guide provides guidance and recommended practices on the installation and maintenance of liquid-immersed power transformers rated 501 kVA and... Withdrawn Standard
450-1987 - Recommended Practice for Maintenance,Testing, and Replacement of Large Lead Batteries for Generating Stations and SubstationsThis recommended practice is limited to providing recommended practices of maintenance, test schedules, and testing procedures than can be used to... Superseded Standard
450-1995 - Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary ApplicationsMaintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead... Superseded Standard
450-2002 - Recommended Practice for Maintenance, Testing , and Replacement of Vented Lead-Acid Batteries for Stationary ApplicationsMaintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead... Superseded Standard
484-2002 - Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary ApplicationsRecommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly, and charging of... Active Standard
484-1987 - Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and SubstationsProvides recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly and... Superseded Standard
484-1996 - Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary ApplicationsIn this IEEE Standard recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly,... Superseded Standard
485-1983 - Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and SubstationsMethods for defining the dc load in a generating station or a substation and for sizing a lead storage battery to supply that load are described.... Superseded Standard
485-1997 - Recommended Practice for Sizing Lead-Acid Batteries for Stationary ApplicationsMethods for defining the DC load and for sizing a lead-acid battery to supply that load for stationary battery applications in full float... Superseded Standard
485-2010 - Recommended Practice for Sizing Lead-Acid Batteries for Stationary ApplicationsMethods for defining the direct current (dc) load and for sizing a lead-acid battery to supply that load for stationary battery applications in... Active Standard
535-1986 - Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating StationsThe objective of qualification is to demonstrate that the batteries and racks, as installed, will perform their required Class 1E function... Superseded Standard
535-2006 - Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating StationsQualification methods for class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary... Superseded Standard
650-1979 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsThis standard describes methods for qualifying static battery chargers and inverters for Class 1E installations in environmentally controlled... Superseded Standard
650-1990 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power... Superseded Standard
650-2006 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations outside containment in nuclear power generating stations... Active Standard
738-1986 - Calculation of Bare Overhead Conductor Temperature and Ampacity Under Steady-State ConditionsThe purpose of this standard is to present a simplified method of calculating the current-temperature relationship of bare over-head lines when... Superseded Standard
738-1993 - Calculating the Current-Temperature of Bare Overhead ConductorsA simplified method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along... Superseded Standard
738-2006 - Calculating the Current-Temperature of Bare Overhead ConductorsA method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along with a... Superseded Standard
937-1987 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsThis recommended practice provides design considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of... Superseded Standard
937-2000 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsDesign considerations and procedures for storage, location, mounting, ventilation, assembly and maintenance, of lead-acid storage batteries for... Superseded Standard
937-2007 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsDesign considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of lead-acid secondary batteries for... Active Standard
946-1985 - Recommended Practice for the Design of Safety-Related DC Auxiliary Power Systems for Nuclear Power Generating StationsGuidance for the design of the dc auxiliary power systems for nuclear and large fossil-fueled power generating stations is provided. The... Superseded Standard
946-1992 - Recommended Practice for the Design of DC Auxiliary Power Systems for Generating StationsGuidance for the design of the DC auxiliary power systems for nuclear and large fossil-fueled power generating stations is provided. The... Superseded Standard
946-2004 - Recommended Practice for the Design of DC Auxiliary Power Systems for Generating SystemsGuidance for the design of the dc auxiliary power systems for nuclear and non-nuclear power generating stations is provided by this recommended... Active Standard
1013-1990 - Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) SystemsDescribes methods for sizing both vented and valve regulated lead-acid batteries used with terrestrial photovoltaic (PV) systems. The purpose is... Superseded Standard
Displaying results 1 - 40 of 80 - all results