Part 1 of this Test Procedure is a method for the evaluation of the useful life of round, enameled or film insulated magnet wire. It is not applicable to round or rectangular magnet wire insulated with fibrous insulations such as cotton or glass fiber. The evaluation of fibrous insulated round and rectangular wires will be covered by subsequent Test Procedures. Enameled and film insulated magnet wire having bare, uninsulated wire diameters ranging from 0.0072 to 0.1285 inch inclusive can be evaluated as described herein. However, because of the fragility of the test specimens, it is recommended that wire with diameters larger than 0.0099 inch be used in this method. Furthermore, the purpose of this Test Procedure is to evaluate the thermal stability of the enamel or insulating film rather than its stability as it may be affected by wire diameter. Wire sizes from 0.032 inch through 0.057 inch are generally recommended as being the most convenient to handle and test.
- Sponsor Committee
- SASB/SASB - Standards Association Standards Board
- Status
- Inactive-Withdrawn Standard
- Board Approval
- 1959-08-01
- History
-
- Withdrawn:
- 1991-12-05
- Published:
- 1959-01-30
Working Group Details
- Society
- IEEE-SASB Coordinating Committees
- Sponsor Committee
- SASB/SASB - Standards Association Standards Board
- Working Group
-
ADMIN - Project Administration
- IEEE Program Manager
- Soo Kim
Contact Soo Kim
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards