This guide provides information on the equipment, cable specimens, test conditions, and measurements to perform accelerated aging tests on medium-voltage cables using water-filled tanks, whether the test be a time to failure test or a test in which samples are aged for fixed times followed by a diagnostic test such as a step ac breakdown test. The guide identifies the critical test parameters and describes techniques for their measurement and control. The implementation of the techniques will facilitate a comparison of data obtained by different laboratories.
- Sponsor Committee
- PE/IC - Insulated Conductors
Learn More About PE/IC - Insulated Conductors - Status
- Inactive-Reserved Standard
- PAR Approval
- 2007-09-27
- Superseded by
- 1407-2021
- Superseding
- 1407-1998
- Board Approval
- 2007-12-05
- History
-
- ANSI Approved:
- 2008-04-15
- Published:
- 2008-02-15
- Inactivated Date:
- 2021-03-25
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/IC - Insulated Conductors
Learn More About PE/IC - Insulated Conductors - Working Group
-
A13W/P1407_WG - Working Group for Aging Tests of MV Cables Using Water-Filled Tanks
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez - Working Group Chair
- Detlef Wald
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1407-2021
IEEE Guide for Accelerated Aging Tests for 5 kV to 46 kV Extruded Electric Power Cables Using Water-Filled Tanks
Provided in this guide are information and recommendations on the equipment, cable specimens, test conditions, test control methodologies, measurements, data analysis, and interpretation in performing accelerated aging tests for 5 kV to 46 kV rated cables using water-filled tanks. The accelerated aging tests may be time-to-failure tests and/or tests in which the samples are aged for fixed times followed by diagnostic testing.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards