Techniques and instrumentation for the measurement and computation of potentially hazardous electromagnetic (EM) fields both in the near field and the far field of the electromagnetic source are specified. The specifications previously set forth in IEEE Std C95.3-1991 are extended and combined. Leakage and near-field measurements and a description of the concepts, techniques, and instruments that can be applied to the measurement of specific absorption rate (SAR) or the electric field strength in organisms (including humans) and phantoms exposed to electromagnetic fields are included. Below 100 MHz, the current flowing through the body to ground is measurable and can be used to determine the SAR and, therefore, a brief treatment of low-frequency body current measurement is included. The "IEEE Get Program" grants public access to view and download individual PDFs of select standards at no charge. Visit https://ieeexplore.ieee.org/browse/standards/get-program/page for details.
- Sponsor Committee
- BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety - Status
- Superseded Standard
- PAR Approval
- 2001-09-27
- Superseded by
- C95.3-2021
- Superseding
- C95.3-1991
- Board Approval
- 2002-12-11
- History
-
- ANSI Approved:
- 2003-04-18
- Published:
- 2003-01-11
- Reaffirmed:
- 2008-06-12
Working Group Details
- Society
- IEEE SA Board of Governors
- Sponsor Committee
- BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety - Working Group
-
SC1 - SC1 -Techniques, Procedures, Instrumentation and Computation Working Group
- IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- Peter Zollman
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C95.1-2019
IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz
.Safety limits for the protection of persons against the established adverse health effects of exposures to electric, magnetic, and electromagnetic fields in the frequency range 0 Hz to 300 GHz are presented in this standard. These exposure limits are intended to apply generally to persons permitted in restricted environments and to the general public in unrestricted environments. These exposure limits are not intended to apply to the exposure of patients by or under the direction of physicians and medical professionals, as well as to the exposure of informed volunteers in medical or scientific research studies, and might not be protective with respect to the use of>medical devices or implants. (NOTE: As of June 29th 2022, Corrigenda 2 was appended to this standard. However, the individual Corrigenda can be downloaded at https://ieeexplore.ieee.org/document/9238523)
C95.1-2019/Cor 1-2019
IEEE Approved Draft Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz - Corrigendum 1
This corrigendum was not published as an individual standard, but was incorporated in C95.1-2019
C95.1-2019/Cor 2-2020
IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz - Corrigenda 2
Technical corrections are addressed in this corrigendum. Figure 1 and Figure 2 in IEEE Std C95.1-2019 were found to be incorrect. They did not accurately portray the limits given in Table 2, Table 3, and Table 4. The figures were corrected with respect to frequency extent and breakpoints to be consistent with the tables.
C95.3-2021
IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 300 GHz
Best practices are described for the development, validation, and application of methods for the computation and measurement of relevant metrics characterizing human exposure to electric and/or magnetic fields (collectively, electromagnetic fields) over the frequency range of 0 Hz to 300 GHz. This recommended practice is a replacement for IEEE Std C95.3-2002 and IEEE Std C95.3.1-2010, extensively revising the contents from those and harmonizing with IEEE Std C95.1-2019. Detailed methodology is not described; rather, requirements for best practice are expressed through guidance and references to other documents and standards. Examples are included to clarify the guidance. This recommended practice is intended for professional users who are familiar with basic electromagnetic field theory and practice and for persons involved in specifying or implementing critical hazard assessments or surveys such as those described in IEEE Std C95.7-2014. (The PDF of this standard is available in the IEEE GET program at no cost to you compliments of the United States Navy, United States Air Force, and United States Army https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=82)
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1460-1996
IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields
A listing of possible measurement goals related to characterizing quasi-static magnetic and electric fields and possible methods for their accomplishment is provided.
C95.3.1-2010
IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 100 kHz
Techniques and instrumentation for the measurement and computation of electric, magnetic, and electromagnetic (EM) fields in the near field of an EM field source are presented in this recommended practice. Descriptions of the concepts, techniques, and instruments that can be applied to the measurement of the electric and magnetic fields and the currents induced in the human body by these fields are provided. Techniques for determining the current density and the electric field strength within the human body are discussed. This recommended practice is intended primarily for use by engineers, biophysicists, and other specialists who are familiar with basic EM field theory and practice, and the potential hazards associated with EM fields. It will be most useful to bio-effects researchers, instrumentation developers and manufacturers, those developing calibration systems and standards, and persons involved in critical hazard assessments or hazard surveys.