Active Standard

IEEE 400.1-2018

IEEE Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC)

The recommended practices and procedures for direct voltage acceptance and maintenance testing of shielded, laminated, dielectric-insulated power cable systems rated 5 kV to 500 kV are presented in this guide. It applies to all types of laminated power cable systems such as paper insulated, lead covered, pipe-type, and pressurized cables that are intended for the transmission or distribution of ac electric power. The tabulated test levels assume that the cable systems have an effectively grounded neutral system or a grounded metallic shield.

Sponsor Committee
PE/IC - Insulated Conductors
Learn More About PE/IC - Insulated Conductors
Status
Active Standard
PAR Approval
2017-02-17
Superseding
400.1-2007
Board Approval
2018-12-05
History
Published:
2019-01-31

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/IC - Insulated Conductors
Learn More About PE/IC - Insulated Conductors
Working Group
F02W/P400.1_WG - Guide for Shielded Power Cable Systems
IEEE Program Manager
Dalisa Gonzalez
Contact Dalisa Gonzalez
Working Group Chair
William Larzelere

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


400.1-2007

IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage

The recommended practices and procedures for acceptance and maintenance testing of shielded, laminated dielectric insulated power cable systems 5 kV and above are presented.

Learn More About 400.1-2007

532-2007

IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables

Revision of IEEE Std 532-1993. This guide covers properties of commonly used jackets as well as selection and testing of jackets. It is written for those responsible for optimizing cable designs. The purpose is to present a reasonably complete picture of the role of jackets so that the subject can be approached in an orderly and organized manner. An effort has been made to avoid the highly technical language and theory commonly used by electrical engineers and chemists to discuss the more detailed application of jackets.

Learn More About 532-2007

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.