Inactive-Reserved Standard

IEEE 1665-2009

IEEE Guide for the Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above

The general parameters for this guide apply to 50 Hz or 60 Hz synchronous generators driven by reciprocating engines, steam turbines, combustion turbines, and hydro turbines. The guide generally applies to the stator and rotor of generators with rated outputs of 1 MVA and above. The guide does not address machine auxiliaries or the excitation system.

Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Status
Inactive-Reserved Standard
PAR Approval
2004-11-18
Board Approval
2009-09-11
History
ANSI Approved:
2010-01-19
Published:
2010-02-12
Inactivated Date:
2021-03-25

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Working Group
GEN - WG1665 - Generator SC - Generator Rewinds - WG#3
IEEE Program Manager
Tom Thompson
Contact Tom Thompson
Working Group Chair
Robert Messel

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P1665

IEEE Draft Guide for the Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above

50 Hz or 60 Hz synchronous generators driven by diesel engines, steam turbines, combustion gas turbines, and hydro-turbines are covered in this guide. The drive may be direct or through a gear box or other device that permits different speeds for the prime mover and the generator. The guide generally applies to the stator and rotor of generators with rated outputs of 1 MVA and above. The guide does not address machine auxiliaries or the excitation system. nThis guide will provide the generator Owner with insight into the considerations that are necessary when rewinding or refurbishing a generator. Particular emphasis is placed on the complete rewind of the stator and rotor.

Learn More About P1665

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.