Superseded Standard

IEEE 1110-2002

IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses

Revision of IEEE Std 1110-1991. Reaffirmed September 2007. Categorizes three direct-axis and four quadrature-axis models, along with the basic transient reactance model. Discusses some of the assumptions made in using various models and presents the fundamental equations and concepts involved in generator/system interfacing. Covers, generally, the various attributes of power system stability, recognizing two basic approaches. The first is categorized under large disturbance nonlinear analysis; the second approach considers small disturbances, where the corresponding dynamic equations are linearized. Applications of a range of generator models are discussed and treated. The manner in which generator saturation is treated in stability studies, both in the initialization process as well as during large or small disturbance stability analysis procedures is addressed. Saturation functions that are derived, whether from test data or by the methods, of finite elements are developed. Different saturation algorithms for calculating values of excitation and internal power angle depending upon generator terminal conditions are compared. The question of parameter determination is covered. Two approaches in accounting for generator field and excitation system base quantities are identified. Conversion factors are given for transferring field parameters from one base to another for correct generator/excitation system interface modeling, Suggestions for modeling of negative field currents and other field circuit discontinuities are included.

Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Status
Superseded Standard
PAR Approval
2001-09-27
Superseded by
1110-2019
Superseding
1110-1991
Board Approval
2002-11-11
History
ANSI Approved:
2003-02-26
Published:
2003-11-12
Reaffirmed:
2007-09-27

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/EM - Electric Machinery
Learn More About PE/EM - Electric Machinery
Working Group
GEN-SC/C50.12 - Generator SC - Revision of C50.12
IEEE Program Manager
Tom Thompson
Contact Tom Thompson
Working Group Chair
Rostyslaw Fostiak

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


PC50.12

Standard for 50 Hz and 60 Hz Synchronous Generators and Generator/Motors Coupled to Hydraulic Turbines and Rated 5 MVA and Above

This standard contains requirements for all types of 50 and 60 Hz synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications.

Learn More About PC50.12

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


C50.12-2005

IEEE Standard for Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above

The requirements in this standard apply to all types of 50 Hz and 60 Hz salient-pole synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications.

Learn More About C50.12-2005

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.