IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
09 DECEMBER 2009

Approved PARs for New Standards

  • P802.1Qbg (C/LM): IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks Amendment: Edge Virtual Bridging
  • P802.1Qbh (C/LM): IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks Amendment: Bridge Port Extension
  • P802.3bf (C/LM): IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications
    Amendment: Media Access Control (MAC) Service Interface and Management Parameters to Support Time Synchronization Protocols
  • P802.11ae (C/LM): IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications; Amendment: Prioritization of Management Frames
  • P802.11af (C/LM): IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
  • P802.19.1 (C/LM): Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 19: TV White Space Coexistence Methods
  • P802.21c (C/LM): IEEE Standard for Local and Metropolitan Area Networks  - Part 21: Media Independent Handover Services Amendment: Optimized Single Radio Handovers
  • P1904.1 (COM/SC): Standard for Service Interoperability in Ethernet Passive Optical Networks
  • P45.8 (IAS/PCI): Recommended Practice for Electrical Installations on Shipboard - Cable Systems
  • P1673 (IAS/PCI): Standard for Requirements for Conduit & Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures Above Atmospheric (1.5 kilopascals, 0.22 psi).
  • P1814 (IAS/PCI): Recommended Practice for Electrical System Design Techniques to Improve Electrical Safety
  • P3000 (IAS/TBCC): Recommended Practice for the Engineering of Industrial and Commercial Power Systems
  • P3001.1 (IAS/TBCC): Recommended Practice for the Planning of Industrial and Commercial Power Systems
  • P3001.5 (IAS/TBCC): Recommended Practice for Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
  • P3001.11 (IAS/TBCC): Recommended Practice for Application of controllers and automation to Industrial and Commercial Power Systems
  • P3002.2 (IAS/TBCC): Recommended Practice for Conducting Load-Flow Studies of Industrial and Commercial Power Systems
  • P3002.3 (IAS/TBCC): Recommended Practice for Conducting Short-Circuit Studies of Industrial and Commercial Power Systems
  • P3004.3 (IAS/TBCC): Recommended Practice for the Application of Low-Voltage Fuses in Industrial and Commercial Power Systems
  • P3004.5 (IAS/TBCC): Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
  • P1812 (PE/EM): Guide for Testing Permanent Magnet Machines
  • P1813 (PE/IC): Guide for Soil Thermal Stability
  • P1815 (PE/T&D): Standard for Electric Power Systems Communications - Distributed Network Protocol (DNP3)
  • P1558-2004/Cor 1 (VT/RT): IEEE Standard for Software Documentation for Rail Equipment and Systems - Corrigendum 1

PARS for Revision of Standards

  • P802.17 (C/LM): Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications
  • P1017 (IAS/PCI): Recommended Practice for Field Testing Electric Submersible Pump Cable
  • P1018 (IAS/PCI): Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
  • P1019 (IAS/PCI): Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
  • P1207 (PE/ED&PG): Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
  • P4 (PE/PSIM): Standard for High-Voltage Testing Techniques
  • P1725 (PE/SB): Standard for Rechargeable Batteries for Cellular Telephones
  • PC62.41.2 (PE/SPDLV): Standard for Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and less) AC Power Circuits
  • P1127 (PE/SUB): Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility
  • PC37.011 (PE/SWG): Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • PC57.12.01 (PE/TR): Standard for General Requirements for Dry-Type Distribution and Power Transformers
  • PC57.96 (PE/TR): Guide for Loading Dry-Type Distribution and Power Transformers
  • P1636.1 (SCC20): Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information Via the eXtensible Markup Language(XML)
  • P16 (VT/RT): Standard for Electrical and Electronic Control Apparatus on Rail Vehicles

Modified PARS

  • P1680 (C/EASC): Standard for Environmental Assessment of Electronic Products
  • P802.1Qaz (C/LM): IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks
    Amendment: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic Classes
  • P802.22 (C/LM): Standard for Information Technology -Telecommunications and Information Exchange Between Systems - Wireless Regional Area Networks (WRAN) - Specific Requirements - Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
  • P1733 (C/MSC): Standard for Layer 3 Transport Protocol for Time Sensitive Applications in Local Area Networks
  • P24765 (C/S2ESC): Standard for Systems and Software Engineering - Vocabulary
  • P1901 (COM/SC): Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications
  • P269 (COM/TA&OS): Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
  • P515 (IAS/PCI): Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications
  • P1584 (IAS/PCI): Guide for Performing Arc-Flash Hazard Calculations
  • P1683 (IAS/PCI): Guide for Specifying Motor Control Centers Rated Up To 600 V AC or 1000 V DC With Features Intended to Reduce Electrical Hazards While Performing Defined Operations
  • P1241 (IM/WM&A): Standard for Terminology and Test Methods for Analog-to-Digital Converters
  • PC37.09b (PE/SWG): IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
    Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • PC37.47 (PE/SWG): Standard Specifications for High Voltage (> 1000 V) Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
  • PC57.32 (PE/TR): Standard Requirements, Terminology and Test Procedures for Neutral Grounding Devices
  • PC57.131 (PE/TR): Standard Requirements for Tap Changers
  • P1616a (VT/LT): Standard for Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: Motor Vehicle Event Data Recorder Connector Lockout Apparatus (MVEDRCLA)

Withdrawn PARs

  • P1596a (C/MSC): Amendment to Standard for Scalable Coherent Interface (SCI)
  • P1639 (C/MSC): Standard for Transmission of Musical Instrument Digital Interface (MIDI) Data Within Local Area Networks: Distributed MIDI - DMIDI
  • P2063 (C/S2ESC): Standard for System and Software Life Cycle Processes--Requirements Engineering
  • P1690 (NTC/SC): Standard Methods for the Characterization of Carbon Nanotubes Used as Additives in Bulk Materials
  • P4 (PE/PSIM): Standard for High Voltage Test Techniques
  • PC57.133 (PE/TR): Guide for Short-Circuit Testing of Distribution and Power Transformers
  • P2200 (C/IA): Standard for Baseline Operating Systems Security (TM) (BOSS TM)
  • P11073-00000 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Framework and overview
  • P11073-00201 (EMB/11073): Recommended Practice for Health informatics - Point-of-care medical device communication - Recommended practice - Profile template
  • P11073-10104 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Nomenclature - Virtual attributes
  • P11073-20000 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Application profile - Framework and overview
  • P11073-20103 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Application profile - Clinical context management (CCoM)
  • P11073-30505 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Transport profile - RF wireless - Wide area (Mobile Phone) Network (wWAN)
  • P11073-60101 (EMB/11073): Standard for Health informatics - Point-of-care medical device communication - Application gateway - HL7 (ver 2.x), Observation reporting interface (ORI)
  • P1673 (IAS/PCI): Standard for Requirements for Conduit & Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures Above 1.5 Kilopascals (0.22 psi)
  • P56 (PE/EM): Guide for Insulation Maintenance of Electric Machines Rated 1 MVA and Higher
  • PC135.1 (PE/T&D): Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
  • P1678 ((PE/T&D): Guide for Braced Post Insulator Assemblies for Overhead Transmission Lines 69 kV and Greater
  • P1681 (PE/T&D): Guide for Application of Active Harmonic Filter Systems for AC Low and Medium Voltages (208V to 17.5kV)

New Standards

  • P802.1aj (C/LM): IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks
    Amendment 08: Two-Port Media Access Control (MAC) Relay
  • P802.1AR (C/LM): IEEE Standard for Local and Metropolitan Area Networks: Secure Device Identity
  • P802.1Qav (C/LM): IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment XX: Forwarding and Queuing Enhancements for Time-Sensitive Streams
  • P802.3-2008/Cor1 (C/LM): IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 1 Timing Considerations for PAUSE Operation
  • P1149.7 (C/TT & BOG/CAG): Standard for Reduced-pin and Enhanced-functionality Test Access Port and Boundary Scan Architecture
  • P1680.1 (C/EASC): Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
  • P1685 (C/DA & BOG/CAG): Standard for IP-XACT, Standard Structure for Packaging, Integrating and Re-Using IP Within Tool-Flows
  • P2600.2 (C/IA): Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment B
  • P2600.3 (C/IA): Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment C
  • PC37.42 (PE/SWG): Standard Specifications for High Voltage (> 1000 Volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices

Revision Standards

  • P115 (PE/EM): Guide for Test Procedures for Synchronous Machines - Part I - Acceptance and Performance Testing - Part II - Test Procedures and Parameter Determination for Dynamic Analysis
  • P433 (PE/EM): Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
  • P1068 (IAS/PCI): Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical and Process Industries
  • P1142 (PE/IC): Guide for the Selection, Testing, Application and Installation of Cables Having Radial Moisture Barriers and/or Longitudinal Water Blocking
  • P1481 (C/DA): Standard for Integrated Circuit (IC) Open Library Architecture (OLA)
  • P1680 (C/EASC): Standard for Environmental Assessment of Electronic Products
  • PC37.015 (PE/SWG): Guide for the Application of Shunt Reactor Switching
  • PC57.12.34 (PE/TR): Standard for Requirements for Pad-Mounted, Compartmental Type, Self Cooled, Three Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below

Reaffirmations

  • 62.2-2004 (PE/EM): IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery
  • 82-2002 (PE/IC): IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
  • 635-2003 (PE/IC): IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • 771-1998 (R2004) (SCC20): IEEE Guide to the Use of the ATLAS Specification
  • 830-1998 (C/S2ESC): IEEE Recommended Practice for Software Requirements Specification
  • 1008-1987 (R2002) (C/S2ESC): IEEE Standard for Software Unit Testing
  • 1061-1998 (R2004) (C/S2ESC): IEEE Standard for a Software Quality Metrics Methodology
  • 1217-2001 (PE/T&D): IEEE Guide for Preservative Treatment of Wood Distribution and Transmission Line Structures
  • 1233-1996 (R2002) (C/S2ESC): IEEE Guide for Developing System Requirements Specifications
  • 1264-1993 (R2004) (PE/SUB): IEEE Guide for Animal Deterrents for Electric Power Supply Substations
  • 1445-1998 (R2004) (SCC20): IEEE Standard for Digital Test Interchange Format (DTIF)
  • 1526-2003 (SCC21): IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • 1621-2004 (C/MSC): IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments
  • 2001-2002 (C/S2ESC): IEEE Recommended Practice for the Internet - Web Site Engineering, Web Site Management, and Web Site Life Cycle
  • C37.81-1989 (R2005) (PE/SWG): IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
  • C37.82-1987 (R2004) (PE/SWG): IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
  • C57.121-1998 (PE/TR): IEEE Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Fluid in Transformers
  • C57.124-1991 (R2002) (PE/TR): IEEE Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers