07 November 2019

IEEE SA Standards Board Approvals

7 November 2019

New PARs

  • P2413.2 (BOG/CAG)
    Standard for a Reference Architecture for Power Distribution IoT (PDIoT)
  • P2851 (C/DA)
    Standard for Exchange/Interoperability Format for Functional Safety Analysis and Functional Safety Verification of IP, SoC, and Mixed Signal ICs
  • P9274.4.2 (C/LT)
    Recommended Practice for Cybersecurity in the Implementation of the Experience Application Programming Interface (xAPI)
  • P1857.10 (C/SAB)
    Standard for Third Generation Video Coding
  • P2850 (C/SAB)
    Standard for an Architectural Framework for Intelligent Cities Operation System
  • P3333.1.4 (C/SAB)
    Standard for the Quality Assessment of Light Field Imaging
  • P2141.2 (CES/BSC)
    Standard for Transforming Enterprise Information Systems from Centralized Architecture into Blockchain-Based Decentralized Architecture
  • P2141.3 (CES/BSC)
    Standard for Transforming Enterprise Information Systems from Distributed Architecture into Blockchain-Based Decentralized Architecture
  • P2847 (COM/PLC)
    Standard for DC Power Transmission and Communication to DC Loads
  • P2838 (EMC/SDCom)
    Standard for Aircraft Component Lightning Strike Direct Effects Qualification
  • P287.1 (IM/HFM)
    Standard for Precision Coaxial Connectors at RF, Microwave, and Millimeter-Wave Frequencies Part 1: General Requirements, Definitions, and Detailed Specifications
  • P1451.9 (IM/ST)
    Standard for Tidal Turbine Health Monitoring System (HMS) with Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
  • P1815.2 (PE/PSCC)
    Standard Profile for Communications with Distributed Energy Resources (DERs) using IEEE Std 1815 [Distributed Network Protocol (DNP3)]
  • P4.1 (PE/PSIM)
    Guide for the Practical Implementation of IEEE Standard 4 on High-Voltage and High-Current Measurement Systems
  • PC37.431.20 (PE/SUB)
    Guide for Protecting Transmission Static Shunt Compensators
  • P2745.4 (PE/T&D)
    Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter: Part 4 Control and Protection Application
  • P2844 (PE/T&D)
    Recommended Practice for Limiting Voltage Imbalance in Electric Power Systems
  • P2845 (PE/T&D)
    Trial Use Standard for Testing and Evaluating the Dielectric Performance of Celebratory Balloons in Contact with Overhead Power Distribution Lines Rated up to 38 kV System Voltage
  • P1671.1-2017/Cor 1 (SASB/SCC20)
    Standard for Automatic Test Markup Language (ATML) Test Descriptions — Corrigendum 1
  • P2848 (SASB/SCC20)
    Standard for Prognostics and Health Management in Automatic Test Systems
  • P2030.10.2 (SASB/SCC21)
    Standard for Electricity Access Requirements for DC Low Power not exceeding 60 V
  • P2846 (VT/ITS)
    Formal Model for Safety Considerations in Automated Vehicle Decision Making

PARs for the Revision of Standards

  • P1559 (AES/GA)
    Standard for Inertial Systems Terminology
  • P145 (APS/SC)
    Standard for Definitions of Terms for Antennas
  • P1800 (C/DA)
    Standard for SystemVerilog — Unified Hardware Design, Specification, and Verification Language
  • P1228 (C/S2ESC)
    Standard for Software Safety
  • P1851 (CES/SC)
    Standard for Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances
  • P2410 (COM/EdgeCloud-SC)
    Standard for Biometric Privacy
  • P1017 (IAS/PCI)
    Recommended Practice for Field Testing Electric Submersible Pump Cable
  • P1018 (IAS/PCI)
    Recommended Practice for Specifying Electric Submersible Pump Cable — Ethylene-Propylene Rubber Insulation
  • P1019 (IAS/PCI)
    Recommended Practice for Specifying Electric Submersible Pump Cable — Polypropylene Insulation
  • P1415 (PE/EM)
    Guide for Induction Machinery Maintenance Testing and Failure Analysis
  • P1799 (PE/EM)
    Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings
  • P1682 (PE/NPE)
    Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations
  • P62582-3 (PE/NPE)
    Nuclear Power Plants — Instrumentation and Control Important to Safety — Electrical Equipment Condition Monitoring Methods — Part 3: Elongation at Break
  • P643 (PE/PSCC)
    Guide for Power-Line Carrier Applications
  • PC37.236 (PE/PSCC)
    Guide for Power System Protective Relay Applications over Digital Communication Channels
  • P1623 (PE/SUB)
    Guide for the Functional Specification of Medium Voltage (1 kV — 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
  • P691 (PE/T&D)
    Guide for Transmission Structure Foundation Design and Testing
  • P1410 (PE/T&D)
    Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
  • PC135.90 (PE/T&D)
    Standard for Pole Line Hardware for Overhead Line Construction
  • PC57.116 (PE/TR)
    Guide for Transformers Directly Connected to Generators
  • P1526 (SASB/SCC21)
    Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems

Modified PARs

  • P2418.3 (C/SAB)
    Standard for the Framework of Distributed Ledger Technology (DLT) Use in Agriculture
  • P1922.2 (COM/GreenICT-SC)
    Standard for a Method to Calculate Near Real-Time Emissions of Information and Communication Technology Infrastructure
  • P1679 (PE/ESSB)
    Recommended Practice for the Characterization and Evaluation of Energy Storage Technologies in Stationary Applications
  • P62704-5 (SASB/SCC39)
    The Assessment of Power Density of Human Exposure to Radio Frequency Fields from Wireless Devices in Close Proximity to the Head and Body, Part 2: Computational Procedure (Frequency Range of 6 GHz to 300 GHz)
  • P7010 (SMC/SC)
    Recommended Practice for Assessing the Impact of Autonomous and Intelligent Systems on Human Well-Being

Withdrawn PARs

  • P2303 (C/CCSC)
    Standard for Adaptive Management of Cloud Computing Environments
  • P3005.7 (IAS/I&CPS)
    Recommended Practice for the Application of Metering for Energy Management of Industrial and Commercial Power Systems
  • P287.1 (IM/HFM)
    Standard for Precision Coaxial Connectors at RF, Microwave and Millimeter-wave Frequencies
  • P62209-3 (SASB/SCC39)
    Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 3: Vector probe systems (Frequency range of 100 MHz to 6 GHz)

Administratively Withdrawn PARs

  • P2200 (C/MSC)
    Standard Protocol for Stream Management in Media Client Devices
  • P1760 (C/S2ESC)
    Information Technology Service Measures and Service Level Agreements
  • P1912 (COM/EdgeCloud-SC)
    Standard for Privacy and Security Architecture for Consumer Wireless Devices
  • P1915.1 (COM/NetSoft-SC)
    Standard for Software Defined Networking and Network Function Virtualization Security
  • P1493 (PE/IC)
    Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
  • P1637 (PE/IC)
    Guide for Selecting and Applying Terminations for Shielded Alternating-Current Power Cable Rated 5 kV – 46 kV
  • P1891 (PE/NPE)
    Standard Criteria for Application of Intelligent Digital Devices to Nuclear Power Generating Stations
  • P1138 (PE/PSCC)
    Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • PC62.200 (PE/SPDLV)
    Guide for the Application of Surge Protective Devices for a Wind Power Facility
  • P563 (PE/T&D)
    Guide on Conductor Self-Damping Measurements
  • P664 (PE/T&D)
    Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors
  • P1243 (PE/T&D)
    Guide for Improving the Lightning Performance of Transmission Lines
  • P1882 (PE/T&D)
    Guide for Establishing, Benchmarking, and Maintaining a Working Program for Energized Transmission Lines
  • P824 (PE/T&D)
    Standard for Series Capacitor Banks in Power Systems
  • P751 (PE/T&D)
    Guide for Wood Structures Used for Overhead Electric Transmission Lines
  • P2040 (VT/ITS)
    Standard for Connected, Automated and Intelligent Vehicles: Overview and Architecture
  • P2040.1 (VT/ITS)
    Standard for Connected, Automated and Intelligent Vehicles: Taxonomy and Definitions
  • P2040.2 (VT/ITS)
    Standard for Connected, Automated and Intelligent Vehicles: Testing and Verification

New Standards

  • 1834 (BOG/CAG)
    IEEE Draft Standard for Technology Supervision Code for Wind Turbine Rotor Systems
  • 1863 (BOG/CAG)
    IEEE Draft Guide for Overhead AC Transmission Line Design
  • 1865 (BOG/CAG)
    IEEE Draft Specifications for Maintenance and Test of Distributed Control Systems in Thermal Power Stations: General Requirements and Definitions
  • 1865.1 (BOG/CAG)
    IEEE Draft Specifications for Maintenance and Test of Distributed Control Systems in Thermal Power Stations: Maintenance and Testing
  • 1865.2 (BOG/CAG)
    IEEE Draft Standard Specifications for Maintenance and Test of Distributed Control Systems in Thermal Power Stations: Operation Service and Management
  • 2804 (C/DA)
    IEEE Draft Standard for Software-Hardware Interface for Multi-Many-Core
  • 802.3cg (C/LM)
    IEEE Draft Standard for Ethernet Amendment 5: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors
  • 802.3cn (C/LM)
    IEEE Draft Standard for Ethernet Amendment 4: Physical Layers and Management Parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Single-Mode Fiber
  • 21840 (C/S2ESC)
    Systems and Software Engineering – Guidelines for the Utilization of ISO/IEC/IEEE 15288 in the Context of System of Systems (S0S)
  • 1838 (C/TT)
    IEEE Draft Standard for Test Access Architecture for Three-Dimensional Stacked Integrated Circuits
  • 1914.1 (COM/MobiNet-SC)
    IEEE Draft Standard for Packet-Based Fronthaul Transport Networks
  • 1922.2 (COM/GreenICT-SC)
    IEEE Draft Standard for a Method to Calculate Near Real-Time Emissions of Information and Communication Technology Infrastructure
  • 1847 (EMB/Stds Com)
    IEEE Draft Recommended Practice for Common Framework of Location Services (LS) for Healthcare
  • 2420 (PE/NPE)
    IEEE Draft Standard Criteria for Combustion Turbine Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • 1071 (PE/T&D)
    IEEE Draft Application Guide for an Engineered Restoration Program for Failed Transmission Structures
  • 1711.2 (PE/PSCC)
    IEEE Draft Standard for Secure SCADA Communications Protocol (SSCP)

Revision Standards

  • 521 (AES/RS)
    IEEE Draft Standard Letter Designations for Radar-Frequency Bands
  • 1481 (C/DA)
    IEEE Draft Standard for Integrated Circuit (IC) Open Library Architecture (OLA)
  • 2401 (C/DA)
    IEEE Draft Standard Format for LSI-Package-Board Interoperable Design
  • 16326 (C/S2ESC)
    ISO/IEC/IEEE Draft International Standard – Systems and Software Engineering – Life Cycle Processes – Project Management
  • 269 (COM/SDB)
    IEEE Draft Standard for Measuring Electroacoustic Performance of Communication Devices
  • 11073-10408 (EMB/11073)
    IEEE Draft Standard – Health Informatics – Personal Health Device Communication Part 10408: Device Specialization – Thermometer
  • 11073-10415 (EMB/11073)
    IEEE Draft Standard – Health Informatics – Personal Health Device Communication – Device Specialization – Weighing Scale
  • 1302 (EMC/SDCom)
    IEEE Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • 1588 (IM/ST)
    IEEE Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
  • 115 (PE/EM)
    IEEE Draft Guide for Test Procedures for Synchronous Machines including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
  • 1110 (PE/EM)
    IEEE Draft Guide for Synchronous Generator Modeling Practices and Parameter Verification with Applications in Power System Stability Analyses
  • 484 (PE/ESSB)
    IEEE Draft Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • 1185 (PE/IC)
    IEEE Draft Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities
  • 382 (PE/NPE)
    IEEE Draft Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
  • 1222 (PE/PSCC)
    IEEE Draft Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • 644 (PE/T&D)
    IEEE Draft Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
  • C57.13.5 (PE/TR)
    IEEE Draft Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
  • C57.123 (PE/TR)
    IEEE Draft Guide for Transformer Loss Measurement
  • 99 (SASB/SCC04)
    IEEE Draft Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment
  • 937 (SASB/SCC21)
    IEEE Draft Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems

Revised/Renewed ICAIDs

  • IC15-004-02 3D Body Processing
    ICAID
  • IC17-015-02 Optical Networks 2020
    ICAID
  • IC17-016-02 IC Industry Consortium on Learning Engineering (ICICLE)
    ICAID
  • IC17-017-02 Blockchain Asset Exchange
    ICAID
  • IC17-018-02 IEEE VR/AR Advisory Board
    ICAID

Terminated ICAID

  • IC19-008 Arc Flash Calculator

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.