IEEE Std 802.3ab-1999 Supplement to Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications—Physical Layer Parameters and Specifications for 1000 Mb/s Operation Over 4-Pair of Category 5 Balanced Copper Cabling, Type 1000BASE-T -Description

Abstract: Type 1000BASE-T PCS, type 1000BASE-T PMA sublayer, and type 1000BASE-T Medium Dependent Interface (MDI) are defined. This supplement provides fully functional, electrical and mechanical specifications for the type 1000BASE-T PCS, PMA, and MDI. This supplement also specifies the baseband medium used with 1000BASE-T.

Keywords: Auto-Negotiation, Category 5, copper, Ethernet, gigabit, MASTER-SLAVE, medium dependent interface, physical coding sublayer, Physical Layer, physical medium attachment

Content

• 1.3 Normative references
• • 1.4 Definitions
  • 1.5 Abbreviations
  • 22. Reconciliation Sublayer (RS) and Media Independent Interface (MII)
  • 28. Physical Layer link signaling for 10 Mb/s, 100 Mb/s, and 1000 Mb/s Auto-Negotiation on twisted pair
  • 28.5 Protocol Implementation Conformance Statement (PICS) proforma for Clause 28, Physical Layer link signaling for 10 Mb/s, 100 Mb/s, and 1000 Mb/s Auto-Negotiation on twisted pair
  • • 28.5.1 Introduction
    • 28.5.4 PICS proforma tables for Physical Layer link signaling for 10 Mb/s, 100 Mb/s, and 1000 Mb/s Auto-Negotiation on twisted pair
  • 30. 10 Mb/s, 100 Mb/s, and 1000 Mb/s Management
  • 32. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T2
  • 34. Introduction to 1000 Mb/s baseband network
  • 42. System considerations for multisegment 1000 Mb/s networks
• Annex A Additional reference material
• Annex 28B IEEE 802.3 Selector Base Page definition
• Annex 28C Next Page Message Code Field definitions
• • 28C.10 Message Code #8 - 1000BASE-T technology message code
• Annex 28D Description of extensions to Clause 28 and associated annexes
• • 28D.5 Extensions required for Clause 40 (1000BASE-T)
• Annex 30B GDMO and ASN.1 defintions for management
• • 40. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 1000BASE-T
  • 40.1 Overview
  • • 40.1.1 Objectives
    • 40.1.2 Relationship of 1000BASE-T to other standards
    • 40.1.3 Operation of 1000BASE-T
    • 40.1.4 Signaling
    • 40.1.5 Inter-sublayer interfaces
    • 40.1.6 Conventions in this clause
  • 40.2 1000BASE-T Service Primitives and Interfaces
  • • 40.2.1 Technology-Dependent Interface
    • 40.2.2 PMA Service Interface
    • 40.2.3 PMA_TXMODE.indicate
    • 40.2.4 PMA_CONFIG.indicate
    • 40.2.5 PMA_UNITDATA.request
    • 40.2.6 PMA_UNITDATA.indicate
    • 40.2.7 PMA_SCRSTATUS.request
    • 40.2.8 PMA_RXSTATUS.indicate
    • 40.2.9 PMA_REMRXSTATUS.request
    • 40.2.10 PMA_RESET.indicate
  • 40.3 Physical Coding Sublayer (PCS)
  • • 40.3.1 PCS functions
    • 40.3.2 Stream structure
    • 40.3.3 State variables
    • 40.3.4 State diagrams
  • 40.4 Physical Medium Attachment (PMA) sublayer
  • 40.4 PMA functional specifications
  • • 40.4.2 PMA functions
    • 40.4.3 MDI
    • 40.4.4 Automatic MDI/MDI-X Configuration
    • 40.4.5 State variables
    • 40.4.6 State Diagrams
  • 40.5 Management interface
  • • 40.5.1 Support for Auto-Negotiation
    • 40.5.2 MASTER-SLAVE configuration resolution
  • 40.6 PMA electrical specifications
  • • 40.6.1 PMA-to-MDI interface tests
  • 40.7 Link segment characteristics
  • • 40.7.1 Cabling system characteristics
    • 40.7.2 Link transmission parameters
    • 40.7.3 Coupling parameters
    • 40.7.4 Delay
    • 40.7.5 Noise environment
    • 40.7.6 External coupled noise
  • 40.8 MDI specification
  • • 40.8.1 MDI connectors
    • 40.8.2 Crossover function
    • 40.8.3 MDI electrical specifications
  • 40.9 Environmental specifications
  • • 40.9.1 General safety
    • 40.9.2 Network safety
    • 40.9.3 Environment
  • 40.10 PHY labeling
  • 40.11 Delay constraints
  • • 40.11.1 MDI to GMII delay constraints
    • 40.11.2 DTE delay constraints (half duplex only)
    • 40.11.3 Carrier de-assertion/assertion constraint (half duplex mode)
  • 40.12 Protocol implementation conformance statement (PICS) proforma for Clause 40—Physical coding sublayer (PCS), physical medium attachment (PMA) sublayer and baseband medium, type 1000BASE-T
  • • 40.12.1 Identification
    • 40.12.2 Major capabilities/options
    • 40.12.3 Clause conventions
    • 40.12.4 Physical Coding Sublayer (PCS)
    • 40.12.5 Physical Medium Attachment (PMA)
    • 40.12.6 Management interface
    • 40.12.7 PMA Electrical Specifications
    • 40.12.8 Characteristics of the link segment
    • 40.12.9 MDI requirements
    • 40.12.10 General safety and environmental requirements
    • 40.12.11 Timing requirements
• Annex 40A Additional cabling design guidelines
• • 40A.1 Alien crosstalk
  • • 40A.1.1 Multipair cabling (i.e., greater than 4-pair)
    • 40A.1.2 Bundled or hybrid cable configurations
  • 40A.2 Cabling configurations
• Annex 40B Description of cable clamp
• • 40B.1 Cable clamp validation
• Annex 40C Add-on interface for additional Next Pages
• • 40C.1 State variables
  • 40C.2 State diagrams
  • • 40C.2.1 Auto-Negotiation Transmit state machine add-on for 1000BASE-T
    • 40C.2.2 Auto-Negotiation receive state diagram add-on for 1000BASE-T

links: [Standard Status] - [Purchase] - [PDF^*] - [LAN/MAN (802) Collection - Description]

available for Standards Online LAN/MAN (802) Collection subscribers only