IEEE STANDARDS BOARD

ACTIONS

March 21, 1996
Piscataway, New Jersey

APPROVED PARs FOR NEW STANDARDS

P802.1q (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local Area Networks--Supplement to Part 1D: Media Access Control (MAC) Bridges: Support for IEEE 802.12

P802.5s (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--Supplement to Part 5: Token Ring Access Method and Physical Layer Specification: Errata, Corrections, and Clarifications

P1073.2.0 (EMB) Standard for Medical Device Application Profiles

P1101.11 (C/BA) Standard for Mechanical Transition Module Specifications for Microcomputers Using the IEEE 1101.1 Equipment Practice

P1124 (PE/T&D) Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmission Systems

P1284.4 (C/MM) Standard for Data Delivery and Implementation of Multiple Logical Channels for IEEE Std 1284-1994 Interfaces

P1442 (PE/T&D) Guide for Field Testing and Monitoring of In-Service Non-Ceramic Insulators

P1451.1 (IM/MS) Standard for a Smart Transducer Interface for Sensors and Actuators--Network Capable Application Processor Information Model

P1451.2 (IM/MS) Standard for a Smart Transducer Interface for Sensors and Actuators--Transducer to Microprocessor Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

P1457 (PE/EM) Standard for Electric Machinery Terminology

P1458 (IA/PCI) Recommended Practice for the Selection, Application, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications

P1460 (SCC28) Guide for the Measurement of Quasi-Static Magnetic and Electric Fields

P1461 (PEL) Recommended Practice for Power Electronics Module Interface

P1463 (AES) Standard for Global Positioning System Receiver Test Standards

P1464 (PEL) Recommended Practice for Test Procedures for Insulated Gate Bipolar Transistor (IGBT) Circuit Simulator Model Validation

PC57.136 (PE/TR) Guide for Sound Level Abatement and Determination for Liquid-Immersed Power Transformers and Shunt Reactors Rated Over 500 kVA

PC62.21 (PE/SPD) Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 Volts and Greater

PC135.61 (PE/T&D) Standard for Testing of Overhead Transmission and Distribution Line Hardware

REVISED PARs

P802.5r (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 5: Token Ring Access Method and Physical Layer Specification: Dedicated Token Ring Operation

P802.12a (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 12: Demand-Priority Access Method, Physical Layer and Repeater Specification: Operation at Greater Than 100 Mb/s

P802.12b (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 12: Demand-Priority Access Method, Physical Layer and Repeater Specification: Two-Pair Balanced Cable Physical Medium Dependent (2-TP PMD), Medium Dependent Interface (MDI), and Link Specifications

P802.12c (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 12: Demand-Priority Access Method, Physical Layer and Repeater Specification: Full Duplex Operation

P802.12d (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 12: Demand-Priority Access Method, Physical Layer and Repeater Specification: Redundant Links

P952 (AES/GA) Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros

P1210 (PE/IC) Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable

P1240 (PE/SUB) Guide for the Evaluation of the Reliability of HVDC Converter Stations

P1266 (PE/SUB) Trial-Use Guide for Evaluation and Development of Substation Life Extension Programs

P1275.3 (C/BA) Standard for Boot (Initialization, Configuration) Firmware--IEEE 1014 (VME) Bus

P1276 (PE/TR) Guide for the Application of High Temperature Insulation Materials in Liquid-Immersed Power Transformers

P1310 (PE/EM) Recommended Practice for Thermal Cycle Testing for Form Wound Stator Bars and Coils for Large Generators

P1387.1 (C/PA) Standard for Information Technology--Portable Operating System Interface (POSIX®) System Administration--Part 1: Overview

P1387.3 (C/PA) Standard for Information Technology--Portable Operating System Interface (POSIX®) System Administration--Part 3: User and Group Administration

P1387.4 (C/PA) Standard for Information Technology--Portable Operating System Interface (POSIX®) System Administration--Part 4: Print Administration

P1596.3 (C/MM) Standard for Low-Voltage Differential Signals (LVDS) for Scalable Coherent Interface (SCI)

PC37.20.4 (PE/SWG) Standard for 1-38 kV Rated Indoor AC Voltage Switches for Use in Metal-Enclosed Switchgear

PC62.91 (PE/SPD) Standard Requirements, Terminology and Test Procedure for Neutral Grounding Devices

PARs FOR STANDARDS REVISIONS

P43 (PE/EM) Recommended Practice for Testing Insulation Resistance of Rotating Machinery

P259 (PE/TR) Standard Test Procedure for Evaluation of Systems of Installation for Dry-Type Specialty and General-Purpose Transformers

P730 (C/SE) Standard for Software Quality Assurance Plans

P802.5j (C/LM) Standard for Information Technology--Telecommunications and Information Exchange Between Systems--Local and Metropolitan Area Networks--LAN/MAN-Type Specific Requirements--Supplement to Part 5: Token Ring Access Method and Physical Layer Specification: Fiber Optic Media

P828 (C/SE) Standard for Software Configuration Management Plans

P844 (IA/PCI) Recommended Practice for Electrical Impedance, Induction and Skin Effect Heating of Pipelines and Vessels

P1030.1 (PE/T&D) Guide for the Specification of High-Voltage Direct-Current Systems: Part 1--Steady-State Performance

PC37.60 (PE/SWG) Standard Requirements for Overhead, Pad Mounted Dry-Vault and Submersible Automatic Circuit Enclosures, and Fault Interrupters for AC Systems

PC37.61 (PE/SWG) Guide for the Application, Operation, and Maintenance of Automatic Circuit Reclosers

PC37.99 (PE/PSR) Guide for the Protection of Shunt Capacitor Banks

PC37.108 (PE/PSR) Guide for the Protection of Network Transformers

PC57.121 (PE/TR) Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in Transformers

WITHDRAWN PARs

P267 (SCC11) Recommended Practice for the Preparation and Use of Symbols

P430 (PE/T&D) Standard Procedures for the Measurement of Radio Noise From Overhead Power Lines and Substations

P896.7 (C/BA) Standard for an Interconnect Between Futurebus+® Systems

P1279 (C/OD&MP) Standard for Information Technology--CD-ROM Architectural Profile

P1281 (C/OD&MP) Standard for Information Technology--Use of ISO 9660: 1988 System Use Fields

P1282 (C/OD&MP) Standard for Information Technology--Interchange of ISO/IEC 9945-1:1990 Filesystems via the ISO 9660:1988

PC57.12.25 (PE/TR) Standard for Transformers--Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable, Insulated, High-Voltage Connectors: High Voltage (34 500 GrdY/19 920 V and Below) and Low Voltage (240/120 V, 167 kVA and Smaller)

PC57.12.27 (PE/TR) Standard for Transformers--Liquid Filled Distribution Transformers Used in Pad-Mounted Installations, Including Unit Substations

PC57.96 (PE/T&D) Guide for Loading Dry Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings

T-PARs

1462 ISO/IEC 14402 (C/SE) International Standard--Information Technology--Software Packages--Quality requirements and testing

1465 ISO/IEC 12119 (C/SE) International Standard--Information Technology--Guidelines for evaluation and selection of CASE tools

NEW STANDARDS

260.4 (SCC14) Standard for Letter Symbols and Abbreviations for Quantities Used in Acoustics

*998 (PE/SUB) Guide for Direct Lightning Stroke Shielding of Substations

*1073 (EMB/MIB) Standard for Medical Device Communications Overview and Framework

1187 (SCC29) Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications

*1210 (PE/IC) Standard Tests for Determining Compatiblity of Cable Lubricants with Wire and Cable

*1226.6 (SCC20) Guide for the Understanding of the A Broad Based Environment for Test (ABBET)

*1233 (C/SE) Guide to Developing System Requirements Specifications

1290 (PE/NPE) Guide for MOV (Motor Operated Valve) Motor Application, Protection, Control and Testing in Nuclear Power Generating Stations

1596.3 (C/MM) Standard for Low Voltage Differential Signals (LVDS) for Scalable Coherent Interface (SCI)

C37.20.4 (PE/SWG) Standard for 1 to 38 kV Rated Indoor AC Voltage Switches for Use in Metal-Enclosed Switchgear

*C37.110 (PE/PSR) Guide for the Application of Current Transformers Used for Protective Relaying Purposes

REVISED STANDARDS

*48 (PE/IC) Standard Test Procedures and Requirements for Alternating Current Current Cable Terminations (2.5 through 765 kV)

*367 (PE/PSC) Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault

382 (PE/NPE) Standard for Qualification of Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power Plants

*484 (SCC 29) Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications

*1050 (PE/ED&PG) Guide for Instrumentation and Control Equipment Grounding in Generating Stations

1067 (PE/T&D) Guide for In-Service Use, Care, Maintenance, and Testing of Conducting Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC

REAFFIRMED STANDARDS

323 (PE/NPE) Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations

421.1 (PE/ED&PG) Standard Definitions for Excitation Systems for Synchronous Machines

505 (PE/ED&PG) Standard Nomenclature for Generating Station Electric Power Systems

690 (PE/ED&PG) Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations

*837 (PE/SUB) Standard for Qualifying Permanent Connections Used in Substation Grounding

944 (PE/ED&PG) Recommended Practice for the Application and Testing of Interruptible Power Supplies for Power Generating Stations

1069 (PE/ED&PG) Recommended Practice for Precipator and Baghouse Hopper Heating System

C62.92.4 (PE/SPD) Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV--Distribution

* Final approval subject to Standards Board conditions being met.