Standard Icon

Wired and Wireless Communications Standards

Standard Name
Status Help less all
55-1953 - Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic EquipmentAlthough the standard permissible operating temperatures of various types of equipment are different for one reason or another, this causes little... Withdrawn Standard
802-1955 - AIEE Proposed Trail Use Test Code DIRECT -- CURRENT CARBON -- PILE VOLTAGE REGULATORS for AIRCRAFTIt is the purpose of this code to define uniform acceptable methods of making tests to determine that the rating, performance and other... Withdrawn Standard
802-1990 - Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Superseded Standard
802-2014 - Overview and ArchitectureThis standard provides an overview to the family of IEEE 802® standards. It describes the reference models for the IEEE 802 standards and explains... Active Standard
802.1B-1992 - Local and Metropolitan Area Network: LAN/MAN ManagementServices and protocol elements that permit the exchange of management information between stations attached to IEEE 802 local and metropolitan... Withdrawn Standard
802.1D-1990 - Media Access Control (MAC) BridgesThis standard, defines an architecture for the interconnection of IEEE 802 local area networks (LANs) below the level of the MAC Service,... Superseded Standard
802.1D-1998 - Local Area Network MAC (Media Access Control) BridgesThe concept of Media Access Control (MAC) Bridging, introduced in the 1993 edition of this standard, has been expanded to define additional... Superseded Standard
802.1D-2004 - Media Access Control (MAC) BridgesAn architecture for the interconnection of IEEE 802 Local Area Networks (LANs) below the MAC Service boundary is defined. MAC Bridges, as... Active Standard
802.1E-1990 - Local Area Network: System Load ProtocolThis standard defines services and protocol elements that permit the downloading of memory images to data processing equipment attached to IEEE... Withdrawn Standard
802.1F-1993 - Standards for Common Definitions and Procedures for IEEE 802 Management InformationManagement information and procedures applicable across the entire family of IEEE 802 LAN/MAN standards within the architectural framework for LAN... Withdrawn Standard
802.1H-1995 - Standards for Recommended Practice for Media Access Control (MAC) Bridging of Ethernet V2.0 in IEEE 802 Local Area NetworksExtensions to the behavior of ISO/IEC 10038 (IEEE 802.ID) media access control (MAC) bridges, in order to facilitate interoperability in bridged... Withdrawn Standard
802.1i-1992 - Local and Metropolitan Area Network MAC Bridges - Fibre Distributed Data Interface (FDDI) SupplementThis standard is a supplement to IEEE Std 802.1D-1990. The scope and field of application of IEEE Std 802.1D-1990 are extended to transparent... Superseded Standard
802.1j-1996 - Supplement to Information technology-Local area networks-Media access control (MAC) bridges: Managed objects for MAC bridgesManaged object classes and their components that permit remote management of ISO/ IEC 10038-conformant MAC bridges by means of suitable management... Superseded Standard
802.1k-1993 - Supplement to LAN/MAN Management: Discovery and Dynamic Control of Event Forwarding (Clause 11)Superseded by IEEE Std 802.1b-1995 Services and protocol elements that permit the exchange of management information between stations attached to... Withdrawn Standard
802.1m-1993 - System Load Protocol Supplement: Managed Object Definitions and Protocol Implementation Conformance Statement (PICS) ProformaDefines managed object classes for the System Load Protocol, compatible with the IEEE 802.1B and ISO/IEC CMIP protocols and defines a PICS... Withdrawn Standard
802.1Q-1998 - Standards for Virtual Bridged Local Area NetworksThis standard defines an architecture for virtual bridged LANs, the services provided in virtual bridged LANs, and the protocols and algorithms... Superseded Standard
802.1Q-2003 - Standards for Virtual Bridged Local Area NetworksThis standard defines an architecture for virtual bridged LANs, the services provided in virtual bridged LANs, and the protocols and algorithms... Active Standard
802.1Q-2005 - Virtual Bridged Local Area NetworksThis standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks,... Superseded Standard
802.1Q-2005/Cor 1-2008 - Virtual Bridged Local Area Networks - Corrigendum 1: Corrections to the Multiple Registration PortocolThis corrigendum to IEEE Std 802.1Q corrects errors in the MRP protocol specification. Superseded Standard
802.1Q-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area NetworksThis standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks,... Active Standard
802.1Q-2011/Cor 2-2012 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Corrigendum 2: Technical and editorial correctionsThis corrigendum to IEEE Std 802.1Q-2011 corrects technical and editorial errorsidentified by the IEEE 802.1 Working Group's maintenance activity.... Active Standard
802.1Q-2012 - Media Access Control (MAC) Bridges and Virtual BridgesThis standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks,... Active Standard
802.1s-2002 - Standards for Amendment to 802.1Q Virtual Bridged Local Area Networks: Multiple Spanning TreesThis standard extends the architecture, protocols, and algorithms specified in IEEE Std 802.1Q, 1998 Edition, to allow data traffic belonging to... Superseded Standard
802.1t-2001 - Common specifications - Part 3: Media Access Control (MAC) Bridges - Amendment 1: Technical and Editorial CorrectionsThis amendment to IEEE Std 802.1D, 1998 edition is intended to document maintenance items identified in the text of IEEE Std 802.1D, 1998 edition ... Superseded Standard
802.1u-2001 - Virtual Bridged Local Area Networks - Corrigendum 1: Technical and Editorial CorrectionsThis amendment to IEEE 802.1Q, 1998 edition is intended to document maintenance items identified in the text of IEEE Std 802.1Q, 1998 edition.... Superseded Standard
802.1v-2001 - Standards for Virtual Bridged Local Area Networks: VLAN Classification by Protocol and Port: Amendment to 802.1QThis amendment to IEEE Std 802.1Q, 1998 Edition describes enhancements to allow for classification of incoming packets by methods other than... Superseded Standard
802.1w-2001 - Common Specifications - Part 3: Media Access Control (MAC) Bridges: Amendment 2 - Rapid ReconfigurationThis amendment to IEEE Std 802.1D, 1998 Edition (ISO/IEC 15802-3: 1998) and IEEE Std 802.1t-2001 defines the changes necessary to the operation of... Superseded Standard
802.1X-2001 - Port Based Network Access ControlPort-based network access control makes use of the physical access characteristics of IEEE 802/sup R/ local area networks (LAN) infrastructures in... Superseded Standard
802.1X-2004 - Port-Based Network Access ControlPort-based network access control makes use of the physical access characteristics of IEEE 802 Local Area Networks (LAN) infrastructures in order... Superseded Standard
802.1X-2010 - Port-Based Network Access ControlPort-based network access control allows a network administrator to restrict the use of IEEE 802 LAN service access points (ports) to secure... Active Standard
802.1AB-2005 - Station and Media Access Control Connectivity DiscoveryThis document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in... Superseded Standard
802.1AB-2009 - Station and Media Access Control Connectivity DiscoveryThis document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in... Active Standard
802.1AB-2009/Cor 1-2013 - Station and Media Access Control Connectivity Discovery Corrigendum 1: Technical and Editorial CorrectionsTechnical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity are corrected by this corrigendum. This... Active Standard
802.1AC-2012 - Media Access Control (MAC) Service DefinitionThe MAC service provided by all IEEE 802(R) MACs along with the Internal Sublayer Service (ISS) that is provided by IEEE 802 MACs to the relay... Active Standard
802.1ad-2005 - Virtual Bridged Local Area Networks---Amendment 4: Provider BridgesThis amendment enables a service provider to use the architecture and protocols of IEEE Std 802.1Q to offer the equivalent of separate LANs,... Superseded Standard
802.1AE-2006 - Media Access Control (MAC) SecurityThis standard specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by... Active Standard
802.1ag-2007 - Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault ManagementThis amendment specifies protocols, procedures, and managed objects to support connectivity fault management. These allow discovery and... Superseded Standard
802.1ah-2008 - Virtual Bridged Local Area Networks Amendment 7: Provider Backbone BridgesThis amendment defines an architecture and bridge protocols for interconnection of multiple provider bridged networks, allowing a provider to... Superseded Standard
802.1aj-2009 - Virtual Bridged Local Area Networks Amendment 11: Two-Port Media Access Control (Mac) RelayThis amendment to IEEE Std 802.1Q specifies the function of a MAC Relay with two MACs, and the protocols and procedures to support its operation.... Superseded Standard
802.1ak-2007 - Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration ProtocolThis amendment specifies a set of protocols that replaces the GARP, GMRP, and GVRP protocols specified in earlier versions of IEEE Std 802.1Q. Superseded Standard
802.1ap-2008 - Virtual Bridged Local Area Networks - Amendment 8: Management Information Base (MIB) Definitions for VLAN BridgesThis amendment includes management information base (MIB) definitions in IEEE Std 802.1Q. Superseded Standard
802.1aq-2012 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 20: Shortest Path BridgingThis amendment to IEEE Std 802.1Q-2011 specifies shortest path bridging of unicast and multicast frames, including protocols to calculate multiple... Active Standard
802.1AR-2009 - Secure Device IdentityA secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. Locally... Active Standard
802.1AS-2011 - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area NetworksThis standard defines a protocol and procedures for the transport of timing over bridged and virtual bridged local area networks. It includes the... Active Standard
802.1AS-2011/Cor 1-2013 - — Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks— Corrigendum 1: Technical and Editorial CorrectionsThis corrigendum to IEEE Std 802.1AS - 2011 corrects minor errors, bugs, ambiguities, and inconsistencies that were missed when the document was... Active Standard
802.1AX-2008 - Link AggregationLink aggregation allows one or more links to be aggregated together to form a link aggregation group, such that a media access control (MAC)... Active Standard
802.1BA-2011 - Audio Video Bridging (AVB) SystemsProfiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations and LANs that are necessary to... Active Standard
802.1BR-2012 - Virtual Bridged Local Area Networks--Bridge Port ExtensionThis standard specifies the operation of Bridge Port Extenders, including management, protocols, and algorithms. Bridge Port Extenders operate in... Active Standard
802.1Qat-2010 - Virtual Bridged Local Area Networks Amendment 14: Stream Reservation Protocol (SRP)This amendment specifies protocols, procedures, and managed objects, usable by existing higher layer mechanisms, that allow network resources to... Superseded Standard
802.1Qau-2010 - Virtual Bridged Local Area Networks Amendment 13: Congestion NotificationThis amendment specifies protocols, procedures and managed objects that support congestion management of long-lived data flows within network... Superseded Standard
802.1Qav-2009 - Virtual Bridged Local Area Networks Amendment 12: Forwarding and Queuing Enhancements for Time-Sensitive StreamsThis amendment to IEEE Std 802.1Q defines enhancements to the forwarding and queueing functions of a VLAN Bridge to support the transmission of... Superseded Standard
802.1Qaw-2009 - Virtual Bridged Local Area Networks Amendment 9: Management of Data Driven and Data Dependent Connectivity FaultsThis amendment extends the connectivity fault management capabilities introduced in IEEE Std 802.1ag-2007 to include tools to facilitate diagnosis... Superseded Standard
802.1Qay-2009 - Virtual Bridged Local Area Networks Amendment 10: Provider Backbone Bridge Traffic EngineeringThis amendment specifies changes to IEEE Std 802.1Q-2005, as amended by IEEE Std 802.1ad-2005, IEEE Std 802.1ag-2007, IEEE Std 802.1ak-2007, IEEE... Superseded Standard
802.1Qaz-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 18: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic ClassesThis amendment to IEEE Std 802.1Q-2011 defines enhancements to transmission selection to support allocation of bandwidth amongst traffic classes,... Active Standard
802.1Qbb-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 17: Priority-based Flow ControlThis amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that enable flow control per traffic class on IEEE 802... Active Standard
802.1Qbc-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 16: Provider Bridging--Remote Customer Service InterfacesThis amendment to IEEE Std 802.1Q-2011 specifies the use of service virtual local area networks (S-VLANs) to provide customer service interfaces... Active Standard
802.1Qbe-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks-- Amendment 15: Multiple I-SID Registration ProtocolThis amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects to support topology change signaling to alter the... Active Standard
802.1Qbf-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 19: PBB-TE Infrastructure Segment ProtectionThis amendment to IEEE Std 802.1Q-2011 specifies localized protection of selected Traffic Engineered Service Instances traversing a common... Active Standard
802.1Qbg-2012 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 21: Edge Virtual BridgingThis amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that -- Provide for the discovery, configuration, and... Active Standard
802.1Qbp-2014 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks - Amendment 22: Equal Cost Multiple Path (ECMP)Routing algorithms and relay behavior supporting equal cost multipath forwarding in shortest path bridged VLANs are specified in this amendment to... Active Standard
802.1AEbn-2011 - Media Access Control (MAC) Security Amendment 1: Galois Counter Mode--Advanced Encryption Standard-- 256 (GCM-AES-256) Cipher SuiteThis amendment specifies the GCM-AES-256 Cipher Suite as an option in addition to the existing mandatory to implement Default Cipher Suite, GCM... Active Standard
802.1AEbw-2013 - —Media Access Control (MAC) Security Amendment 2: Extended Packet NumberingThe optional use of Cipher Suites that make use of a 64-bit (PN) to allow more than 232 MACsec protected frames to be sent with a single Secure... Active Standard
802.1AXbk-2012 - Link Aggregation Amendment 1: Protocol AddressingLink Aggregation allows one or more links to be aggregated together to form a Link Aggregation Group, such that a Media Access Control (MAC)... Active Standard
802.2-1989 - Specific Requirements - Part 2: Logical Link ControlThis standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open... Withdrawn Standard
802.2a-1993 - Flow Control Techniques for Bridged Local Area NetworksProvide updates to the existing 802.2 Standard. Withdrawn Standard
802.2c-1997 - Part 2: Logical link control--Supplement 3: Conformance requirementsThis IEEE Standards product is part of the 802 family on LAN/MAN. This standard is part of a family of standards for local area networks (LANs)... Withdrawn Standard
802.3-1985 - Local Area Networks: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) - (ETHERNET)The carrier sense multiple access with collision detection (CSMA/CD) media access method is the means by which two or more stations share a common... Superseded Standard
802.3-2000 - Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-2002 - IT - LAN/MAN - Specific Requirements - Part 3: CSMA/CD Access Method and Physical Layer Specifications - Maintenance Revision #6The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-2005 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3-2005/Cor 1-2006 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 1This corrigendum clarifies and corrects isolation text including harmonization for both powered and unpowered Medium Dependent Interfaces Superseded Standard
802.3-2005/Cor 2-2007 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 2: Std 802.3an-2006 10GBASE-T CorrectionCorrigendum to IEEE Std 802.3-2005. This corrigendum will correct Equation 55-55. It has been incorporated into the second printing of IEEE Std... Superseded Standard
802.3-2008 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3-2012 - EthernetEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control ... Active Standard
802.3.1-2011 - Management Information Base (MIB) Definitions for EthernetThe Management Information Base (MIB) module specifications for IEEE Std 802.3, also known as Ethernet, are contained in this standard. It... Superseded Standard
802.3.1-2013 - Management Information Base (MIB) Definitions for EthernetThe Management Information Base (MIB) module specifications for IEEE Std 802.3TM, also known as Ethernet, are contained in this standard. It... Active Standard
802.3-2002 - Specific requirements-- Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3h-1990 - Supplement to 802.3 - Layer Management (Section 5)This Local Area Network (LAN) standard defines the Layer Management specification for networks based on the CSMA/CD access method. It provides the... Superseded Standard
802.3i-1990 - Supplement to 802.3 - System Considerations for Multisegment 10 M/S Baseband Networks (Section 13) and Twisted-Pair Medium Attachmen Unit and Baseband Med Spec, Type 10BASE-T (Section 14)This Local Area Network standard specifies the Type 10BASE-T Medium Attachment Unit (MAU) and one specific unshielded twisted-pair medium for use... Superseded Standard
802.3j-1993 - Supplement to 802.3 - Fiber Optic Active and Passive Star-Based Segments, Type 10BASE-F (Sections 15-18)Superseded by IEEE Std 802.3-2002 This amendment to IEEE Std 802.3-2002, as amended by IEEE Std 802.3ae-2002 10Gb/s Ethernet and IEEE Std 802.3af... Superseded Standard
802.3k-1992 - Supplement to 802.3 - Layer Management for 10 Mb/s Baseband Repeaters (Section 19)The supplement to ISO/IEC 8802-3: 1992 (ANSI/IEEE Std 802.3, 1992 Edition) defines a set of mechanisms that enable management of ISO/IEC 8802-3 10... Superseded Standard
802.3l-1992 - Supplement to 802.3 - Type 10BASE-T Medium Attachment Unit (MAU) Protocol Implementation Conformance Statement (PICS) Proforma (Section 14.10)This supplement to ISO/IEC 8802-3:1992 defines conformance requirements for Type 10BASE-T Medium Attachment Unit (MAU) implementations for local... Superseded Standard
802.3m-1995 - Supplement to 802.3 - (Second Maintenance Ballot)Abstract not available. See ISO/IEC 8802-3. Superseded Standard
802.3n-1995 - Supplement to 802.3 - (Third Maintenance Ballot)Abstract not available. See ISO/IEC 8802-3. Superseded Standard
802.3s-1995 - Supplement to 802.3 - (Fourth Maintenance Ballot)Abstract not available. See ISO/IEC 8802-3. Superseded Standard
802.3u-1995 - Supplement - Media Access Control (MAC) Parameters, Physical Layer, Medium Attachment Units and Repeater for 100Mb/s Operation, Type 100BASE-T (Clauses 21-30)The ISO/IEC CSMA/CD Media Access Control (MAC) is given an additional set of parameters for 100 Mb/s operation. A repeater and added Physical... Superseded Standard
802.3x-1997 - Standards for Specification for 802.3 Full Duplex OperationAbstract for 802.3x-1997: Necessary changes and additions are made to provide for an additional, full duplex mode of operation on a speed... Superseded Standard
802.3y-1997 - Standards for Physical Layer Specification for 100 Mb/s Operation on Two Pairs of Category 3 or Better Balanced Twisted Pair Cable (100BASE-T2)Changes and additions to the 100BASE-T portion of IEEE Std 802.3 are provided to specify an additional 100 Mb/s transceiver type 100BASE-T, which... Superseded Standard
802.3aa-1998 - Maintenance Revision #5 (100 BASE-T), Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Maintenance Revision #5 (100 BASE-T)The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3ac-1998 - Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) frame extensions for Virtual Bridged Local Area Networks (VLAN) tagging on 802.3 networksChanges and additions to IEEE standard 802.3, 1998 edition, to support virtual bridged local area networks (VLANs) as specified in IEEE P802.1Q.... Superseded Standard
802.3ad-2000 - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications-Aggregation of Multiple Link SegmentsAn optional Link Aggregation sublayer for use with CSMA/CD MACs is defined. Link Ag-gregation allows one or more links to be aggregated together... Superseded Standard
802.3ae-2002 - Part 3: CSMA/CD Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s OperationSupport to extend the IEEE 802.3 protocol and MAC specification to an operating speed of 10 Gb/s. Several Physical Coding Sublayers known as... Superseded Standard
802.3ah-2004 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment: Media Access Control Parameters, Physical Layers, and Management Parameters for Subscriber Access NetworksThis amendment to IEEE Std 802.3-2002 as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003, IEEE Std 802.3aj-2003, and IEEE Std 802.3ak-2004... Superseded Standard
802.3aj-2003 - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Maintenance 7This amendment to IEEE Std 802.3-2002, as amended by IEEE Std 802.3ae-2002 10Gb/s Ethernet and IEEE Std 802.3af-2003 DTE Power via MDI, contains a... Superseded Standard
802.3ak-2004 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10GBASE-CX4This amendment to IEEE Std 802.3-2002, as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003 and IEEE Std 802.3aj-2003, specifies a new... Superseded Standard
802.3an-2006 - – LAN/MAN - Specific Requirements Part 3: CSMA/CD Access Method and Physical Layer Specifications - Amendment: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10GBASE-TThis amendment to IEEE Std 802.3-2005 specifies a new Physical Coding Sublayer interface and a new Physical Medium Attachment sublayer interface... Superseded Standard
802.3ap-2007 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications - Amendment: Ethernet Operation Over Electrical BackplanesThis amendment to IEEE Std 802.3-2005 includes the new Clause 69 through Clause 74. Clause 69 provides an overview of Ethernet operation over... Superseded Standard
802.3aq-2006 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThis amendment to IEEE Std 802.3-2005 specifies a new PMD, 10GBASE-LRM, for serial, 10 Gb/s operation over up to 220 m of 62.5 ¿m and 50 ¿m... Superseded Standard
802.3as-2006 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThis amendment to IEEE Std 802.3-2005 extends the IEEE 802.3 basic frame format with the addition of an envelope frame to accommodate additional... Superseded Standard
802.3at-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 3: Data Terminal Equipment (DTE) Power via the Media Dependent Interface (MDI) EnhancementsThis amendment includes changes to IEEE Std 802.3-2008 to augment the capabilities of IEEE Std 802.3 with higher power levels and improved power... Superseded Standard
802.3av-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 1: Physical Layer Specifications and Management Parameters for 10 Gb/s Passive Optical NetworksThis amendment to IEEE Std 802.3-2008 extends Ethernet Passive Optical Networks (EPONs) operation to 10 Gb/s providing both symmetric, 10 Gb/s... Superseded Standard
802.3bc-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 2: Ethernet Organizationally Specific Type, Length, Value (TLVs)This amendment to IEEE Std 802.3-2008 transfers the IEEE 802.3 Organizationally Specific TLVs, specified in IEEE Std 802.1AB(TM)-2009, Station and... Superseded Standard
802.3bf-2011 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 7: Media Access Control (MAC) Service Interface and Management Parameters to Support Time Synchronization ProtocolsThis amendment to IEEE Std 802.3 defines the Time Synchronization Service Interface (TSSI) to indicate when the Start Frame Delimiter (SFD)... Superseded Standard
802.3bg-2011 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 6: Physical Layer and Management Parameters for Serial 40 Gb/s Ethernet Operation Over Single Mode FiberThis amendment to IEEE Std 802.3-2008 specifies a new Physical Medium Dependent (PMD) sublayer, 40GBASE-FR, for serial 40Gb/s operation over up to... Superseded Standard
802.3bj-2014 - Ethernet Amendment 2: Physical Layer Specifications and Management Parameters for 100 Gb/s Operation Over Backplanes and Copper Cables100 Gb/s Physical Layer (PHY) specifications and management parameters for operation on electrical backplanes and twinaxial copper cables are... Active Standard
802.3bk-2013 - Ethernet—Amendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical NetworksThis amendment to IEEE Std 802.3 defines the physical layer specifications and management parameters for EPON operation on point-to-multipoint... Active Standard
802.3-REVam-2005 - specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.4-1990 - Token-Passing Bus Access Method and Physical Layer SpecificationsThis Local Area Network (LAN) standard, ISO/IEC 8802-4 : 1990 (ANSI/IEEE Std 802.4-1990), deals with all elements of the token-passing bus access... Withdrawn Standard
802.4a-1986 - Local Area Network: Fiber Optic Token BusAdd additional physical layer and media specifications utilizing fiber optic media to IEEE Std 802.4. Withdrawn Standard
802.4b-1992 - Local Area and Metropolitan Area Networks: 802.4 Supplement: Enhancements for Physical Layer Diversity (Redundant Media Control Unit)The supplement to ISO/IEC 8802-4:1990 (ANSI/IEEE 802.4-1990) provides a recommendation for employing diversity in the physical layer of token... Withdrawn Standard
802.4h-1997 - Standard Alternative Use of BNC Connectors and Manchester-Encoded Signaling Methods for Single-Channel Bus Physical Layer EntitiesThis supplement to ISO/IEC 8802-4:1990 [ANSI/IEEE Std 802.4-1990] provides the functional, electrical, and mechanical characteristics of single... Withdrawn Standard
802.5-1989 - Local Area Networks: Token Ring Access Method and Physical Layer SpecificationsThis revised ANSI/IEEE 802.5-1985 is part of a standards family for LANs. For the purpose of compatible interconnection of data processing... Superseded Standard
802.5c-1991 - Standards for Supplement to Token Ring Access Method and Physical Layer Specifications: Recommended Practice for Dual Ring Operation with Wrapback ReconfigurationExtensions to the IEEE 802.5 Token-Passing Ring standard are defined. These extensions implement a dual ring local area network (LAN) topology... Superseded Standard
802.5d-1992 - Interconnected Token Ring LANsAbstract not available. See ISO/IEC 8802-5. Superseded Standard
802.5j-1993 - Trial Use Information Processing Systems-Local Area Networks-Part 5: Token Ring Access Method and Physical Layer Spec.-Fiber Optic Media Station AttachmentSuperseded by IEEE Std 802.1b-1995 The functional, electrical, optical, and mechanical characteristics of a fibre optic interface for connecting a... Superseded Standard
802.5t-2000 - Part 5: Token Ring access method and physical layer specifications 100 Mbit/s Dedicated Token Ring OperationThis supplement specifies the changes required to ANSI/IEEE Std 802.5, 1998 Edition, (Base standard) and ANSI/IEEE Std 802.5r, 1998 Edition, and... Withdrawn Standard
802.5v-2000 - Part 5: Token Ring access method and physical layer specifications Gigabit Token Ring OperationAdministratively withdrawn 2008. Amendment to IEEE 802.5-1999. This amendment specifies the changes required to IEEE 802.5, 1999 Edition (ISO... Withdrawn Standard
802.5w-2000 - Corrigenda to Part 5: Token Ring access method and physical layer specificationsThis corrigenda to local and metropolitan area network standards, ISO/IEC 8802-5:1998 and ISO/IEC 8802-5:1998/Amd. 1:1998, is part of a family of... Withdrawn Standard
802.6-1990 - Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network (MAN)This standard is part of a family of standards for local area networks (LANs) and metropolitan area networks (MANs) that deals with the physical... Withdrawn Standard
802.6c-1993 - Supplement to 802.6: Physical Layer Convergence Procedure (PLCP) for DS1-Based Systems (Clause 12)(Sold together with IEEE Std 802.6h-1993.) A Physical Layer Convergence Procedure (PLCP) in which the Distributed Queue Dual Bus (DQDB) Layer is... Withdrawn Standard
802.6h-1993 - Supplement to 802.6: Isochronous Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network (MAN)Enhancements to the Distributed Queue Dual Bus (DQDB) subnetwork of a MAN standard are defined that support applications requiring periodic,... Withdrawn Standard
802.6j-1995 - Supplement to Std 802.6,1994 Edition - Connection-Oriented Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network(MAN)Enhanced Queued Arbitrated (QA) Functions, which can support applications requiring bandwidth guarantees and delay limits on a DQDB subnetwork,are... Withdrawn Standard
802.6k-1992 - Standards for Supplement to Media Access Control (MAC) Bridges IEEE Standard 802.6 Distributed Queue Dual Bus (DQDB) Subnetwork of a MANModifications and additions to IEEE Std 802. lD-1990 that extend its scope and field of application to transparent bridging between 802.6... Superseded Standard
802.7-1989 - Local Area Networks: Recommended Practice: Broadband Local Area NetworksThis standard specifies the design, installation, and test parameters for a broadband cable medium. The medium supports the communication of IEEE... Withdrawn Standard
802.9-1994 - Integrated Services (IS) LAN Interface at the Medium Access Control (MAC) and Physical (PHY) LayersThe scope of this IEEE standard is to develop an ISLAN (integrated services LAN) interface at the medium access control (MAC) sublayer and the... Withdrawn Standard
802.9a-1995 - 802.9 Supplement: Standard Specification of ISLAN 16-T (Supplement to 802.9-1994.)The architecture, frame structure, service specifications, Physical (PHY) Layer, management, and signalling of the ISLAN16-T interface are defined... Withdrawn Standard
802.9c-1995 - Standards for Supplement to IEEE Std 802.9-1994 - Managed Object Conformance Statement (MOCS) ProformaThe Managed Object Conformance Statement (MOCS) proforma for IEEE Std 802.91994 is provided. The MOCS specified in this supplement pertains to... Withdrawn Standard
802.9d-1995 - 802.9 Supplement: Standard Protocol Implementation Conformance Statement (PICS) ProformaThe Protocol Implementation Conformance Statement (PICS) proforma for IEEE Std 802.9-1994 is provided. It does not include the Managed Objects... Withdrawn Standard
802.10-1992 - Interoperable LAN/MAN Security (SILS) Currently Contains Secure Data Exchange (SDE) (Clause 2)A security protocol that can be used to protect IEEE 802 local area networks (LANs) and metropolitan area networks (MANs) is described. This Open... Superseded Standard
802.10-1998 - Interoperable LAN/MAN Security (SILS)IEEE standard 802.10 provides specifications for an interoperable data link layer security protocol and associated security services. The secure... Withdrawn Standard
802.10a-1999 - Interoperable LAN/MAN Security (SILS): The Model (Clause 1)An architectural description of the functions and location of standard for interoperable LAN/MAN security (SILS) components is provided. The SILS... Withdrawn Standard
802.10b-1992 - Interoperable LAN/MAN Security (SILS) - Part B: Secure Data Exchange (SDE) (Clause 2)A security protocol that can be used to protect IEEE 802 Local Area Networks (LANs) and Metropolitan Area Networks (MANs) is described. This Open... Superseded Standard
802.10c-1998 - Standards for Supplement to Interoperable LAN/MAN Security (SILS)--Key Management (Clause 3)A cryptographic key management model and a key management OSI Basic Reference Model Application Layer protocol are specified. Withdrawn Standard
802.10e-1993 - Supplement to Std 802.10b: Secure Data Exchange (SDE) Sublayer Management (Subclause 2.8)A method to allow Ethernet V2.0 Media Access Control (MAC) Protocol Data Units (PDUs) to be protected with the Secure Data Exchange (SDE) protocol... Superseded Standard
802.10f-1993 - Standards: Recommended Practice for SDE on Ethernet V2.0 in IEEE 802 LANs (Annex 2H)A set of managed object classes to be used in the management of the Secure Data Exchange (SDE) sublayer and its protocol exchanges is specified. Superseded Standard
802.10g-1995 - 802.10 Supplement: Standard Secure Data Exchange (SDE) - Security Label (Annexes 2I, 2J, and 2K)A security label option that can be used to implement rule-based access controls for the protection of IEEE 802 local area networks (LANs) and... Superseded Standard
802.10h-1997 - Standard Secure Data Exchange (SDE) - Protocol Implementation Conformance Statement (PICS) Proforma (Annex 2L)The secure data exchange (SDE) protocol implementation conformance statement (PICS) proforma is provided. The SDE PICS proforma defines the... Superseded Standard
802.11-1997 - Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, part of a... Superseded Standard
802.11-1999 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThis standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant... Superseded Standard
802.11-2007 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Superseded Standard
802.11-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
802.11a-1999 - LAN/MAN Specific Requirements - Part 11: Wireless Medium Access Control (MAC) and physical layer (PHY) specifications: High Speed Physical Layer in the 5 GHz bandChanges and additions to IEEE Std. 802.11-1999 are provided to support the new high-rate physical layer (PHY) for operation in the 5 GHz band. Superseded Standard
802.11b-1999 - Local and Metropolitan networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Higher Speed Physical Layer (PHY) Extension in the 2.4 GHz bandChanges and additions to IEEE Std 802.11, 1999 Edition are provided to support the higher rate physical layer (PHY) for operation in the 2.4 GHz band. Superseded Standard
802.11d-2001 - Specific requirements-- Part 11: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Specification for operation in additional regulatory domainsThis amendment specifies the extensions to IEEE Std 802.11(R) for wireless local area networks providing specifications for conformant operation... Superseded Standard
802.11e-2005 - Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 8: Medium Access Control (MAC) Quality of Service EnhancementsThis amendment defines the medium access control (MAC) procedures to support local area network (LAN) applications with quality of service (QoS)... Superseded Standard
802.11F-2003 - Trial-Use Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 OperationRecommended practices for implementation of an Inter-Access Point Protocol (IAPP) on a Distribution System (DS) supporting ISO/IEC 8802-11:1999... Withdrawn Standard
802.11g-2003 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Further Higher Data Rate Extension in the 2.4 GHz BandChanges and additions to IEEE Std 802.11, 1999 Edition, as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, and 802.11d... Superseded Standard
802.11h-2003 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Spectrum and Transmit Power Management Extensions in the 5 GHz Band in EuropeThis amendment specifies the extensions to IEEE 802.11TM for wireless local area networks (WLANs) providing mechanisms for dynamic frequency... Superseded Standard
802.11i-2004 - Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 6: Medium Access Control (MAC) Security EnhancementsSecurity mechanisms for IEEE 802.11 are defined in this amendment, which includes a definition of WEP for backward compatibility with the original... Superseded Standard
802.11j-2004 - Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications--Amendment 7:4.9 GHz-5 GHz Operation in JapanThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for operation in the 4.9... Superseded Standard
802.11k-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 1: Radio Resource Measurement of Wireless LANsThis amendment specifies the extensions to IEEE Std 802.11 for Wireless LANs providing mechanisms for Radio Resource Measurement. Superseded Standard
802.11n-2009 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Higher ThroughputThis amendment defines modifications to both the 802.11 physical layers (PHY) and the 802.11 Medium Access Control Layer (MAC) so that modes of... Superseded Standard
802.11p-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 6: Wireless Access in Vehicular EnvironmentsThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing wireless communications while in a... Superseded Standard
802.11r-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Fast Basic Service Set (BSS) TransitionThis amendment specifies the extensions to IEEE Std 802.11-2007 for wireless local area networks (WLANs) providing mechanisms for fast basic... Superseded Standard
802.11s-2011 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 10: Mesh NetworkingThis amendment describes protocols for IEEE 802.11 stations to form self-configuring multi-hop networks that support both broadcast/multicast and... Superseded Standard
802.11u-2011 - Local and Metropolitan networks-specific requirements-Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 9: Interworking with External NetworksThis amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) that support wireless local area network (WLAN) interworking... Superseded Standard
802.11v-2011 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 8: 802.11 Wireless Network ManagementThis amendment provides Wireless Network Management enhancements to the IEEE 802.11 MAC, and PHY, extending radio measurements to effect a... Superseded Standard
802.11w-2009 - Specific requirements. Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Protected Management FramesThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for protecting management... Superseded Standard
802.11y-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: 3650-3700 MHz Operation in USAThis amendment defines enhancements to the IEEE 802.11 physical layer (PHY) and medium access control (MAC) to support operation in the 3650¿3700... Superseded Standard
802.11z-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 7: Extensions to Direct-Link Setup (DLS)This amendment provides direct-link setup enhancements to the IEEE 802.11 MAC and PHY, extending direct-link setup to be independent of the access... Superseded Standard
802.11aa-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: MAC Enhancements for Robust Audio Video StreamingAmendment to IEEE Std 802.11(TM)-2012.This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) for robust audio video ... Active Standard
802.11ac-2013 - —Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications--Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz.The purpose of this amendment is to improve the IEEE 802.11™ wireless local area network (WLAN) user experience by providing significantly higher... Active Standard
802.11ad-2012 - Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz BandThis amendment defines modifications to both the IEEE 802.11 physical layers (PHYs) and the IEEE 802.11 medium access control layer (MAC) to... Active Standard
802.11ae-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management FramesA mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified... Active Standard
802.11af-2013 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Television White Spaces (TVWS) OperationEnhancements to the IEEE 802.11 physical layers (PHYs) and medium access control (MAC) sublayer to support operation in the white spaces in... Active Standard
802.12-1995 - Std 802.12-1990, IEEE Standards for Local and Metropolitan Networks: Demand Priority Access Method, Physical Layer and Repeater SpecificationThe media access control characteristics for the Demand Priority access method are specified. The layer management, physical layers, and media... Withdrawn Standard
802.12c-1998 - Supplement to Information Technology--Specific requirements--Part 12: Demad-priority access method, physical layer and repeater specifications: Full-Duplex OperationOptional MAC capabilities are defined to allow direct link connection between two end nodes with provision for both half-duplex and full-duplex... Withdrawn Standard
802.12d-1997 - Demand Priority Access Method, Physical Layer and Repeater Specifications: Redundant LinksRevisions to the IEEE 802.12 demand priority access method allowing optional implementation of redundant links to facilitate automatic recovery of... Withdrawn Standard
802.15.1-2002 - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)The lower transport layers [(Logical Link Control and Adaptation Protocol (L2CAP), Link Manager Protocol (LMP), baseband and radio] of the... Superseded Standard
802.15.2-2003 - Recommended Practice for Information technology-- Specific requirements-- Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless Devices Operating in Unlicensed Frequency BandsThis recommended practice addresses the issue of coexistence of wireless local area networks and wireless personal area networks. These wireless... Active Standard
802.15.3-2003 - Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz radio transmissions in a Wireless Personal... Active Standard
802.15.3b-2005 - Amendment to Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN): Amendment to MAC SublayerThis amendment provides corrections and optimizations to IEEE Std 802.15.3-2003. The management service access points (SAPs) have been completely... Active Standard
802.15.3c-2009 - Specific requirements-- Part 15.3: Amendment 2: Millimeter-wave-based Alternative Physical Layer ExtensionThis amendment defines and alternative physical layer (PHY) for IEEE Std 802.15.3-2003. Three PHY modes have been defined that enable data rates... Active Standard
802.15.4-2003 - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN)This standard defines the protocol and compatible interconnection for data communication devices using low data rate, low power and low complexity... Superseded Standard
802.15.4-2006 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs)IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low... Superseded Standard
802.15.4-2011 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio... Active Standard
802.15.4a-2007 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHYsThis standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity... Superseded Standard
802.15.4c-2009 - Specific requirements-- Part 15.4: Amendment 2: Alternative Physical Layer Extension to support one or more of the Chinese 314-316 MHz, 430-434 MHz, and 779-787 MHz bandsThis amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations,... Superseded Standard
802.15.4d-2009 - Specific requirements-- Part 15.4: Amendment 3: Alternative Physical Layer Extensionto support the Japanese 950 MHz bandsThis amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency... Superseded Standard
802.15.4e-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayerIEEE Std 802.15.4-2011 is amended by this standard. The intention of this amendment is to enhance and add functionality to the IEEE 802.15.4 MAC... Active Standard
802.15.4f-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY)This amendment provides two PHYs (MSK and LRP UWB) that can be used in a wide range of applications requiring various combinations of low cost,... Active Standard
802.15.4g-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility NetworksIn this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate... Active Standard
802.15.4k-2013 - — Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)—Amendment 5: Physical Layer Specifications for Low Energy, Critical Infrastructure Monitoring Networks.Two PHYs (DSSS and FSK) that support critical infrastructure monitoring applications are provided in this amendment to IEEE Std 802.15.4TM-2011.... Active Standard
802.15.4m-2014 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - Amendment 6: TV White Space Between 54 MHz and 862 MHz Physical LayerIn this amendment to IEEE Std 802.15.4(TM)-2011, outdoor low-data-rate, wireless, television white space (TVWS) network requirements are addressed... Active Standard
802.15.4p-2014 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - Amendment 7: Physical Layer for Rail Communications and Control (RCC)This amendment to IEEE Std 802.15.4(TM)-2011 specifies a PHY for use in equipment intended to address rail transportation industry needs and to... Active Standard
802.15.5-2009 - Recommended Practice for Information technology-- Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs)This IEEE recommended practice defines the architectural framework that enables WPAN devices to promote interoperable, stable, and scaleable... Active Standard
802.15.6-2012 - Part 15.6: Wireless Body Area NetworksShort-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It... Active Standard
802.15.7-2011 - Part 15.7: Short-Range Wireless Optical Communication Using Visible LightA PHY and a MAC layer for short-range optical wireless communications using visible light in optically transparent media are defined. The visible... Active Standard
802.16-2001 - Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis standard specifies the air interface of fixed (stationary) point-to-multipoint broadband wireless access systems providing multiple services.... Superseded Standard
802.16/Conformance02-2003 - Conformance to Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface(Conformance to IEEE Std 802.16-2001 as amended by IEEE Std 802.16a ™ -2003 and IEEE Std 802.16c ™ -2002). This standard represents the Test Suite... Withdrawn Standard
802.16-2004 - Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis standard specifies the air interface of fixed broadband wireless access (BWA) systems supporting multimedia services. The medium access... Superseded Standard
802.16/Conformance03-2004 - Conformance to Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air InterfaceThis standard represents the Radio Conformance Tests (RCT) specification for base stations and subscriber stations based upon the WirelessMAN-SC... Withdrawn Standard
802.16-2004/Cor 1-2005 - Corrigendum to Standard for Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis corrigendum contains substantive corrections to IEEE Std 802.16-2004. It corrects errors, inconsistencies, and ambiguities in that standard.... Superseded Standard
802.16/Conformance04-2006 - Conformance to 802.16 - Part 4: Protocol Implementation Conformance Statement (PICS) Proforma for Frequencies below 11 GHzConformance to IEEE Std 802.16-2004 This amendment updates and expands IEEE Std 802.16-2004 to allow for mobile subscriber stations. Active Standard
802.16-2009 - Part 16: Air Interface for Broadband Wireless Access SystemsThis standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile... Superseded Standard
802.16-2012 - Air Interface for Broadband Wireless Access SystemsThis standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile... Active Standard
802.16.1-2012 - WirelessMAN-Advanced Air Interface for Broadband Wireless Access SystemsThe WirelessMAN-Advanced Air Interface, an enhanced air interface designated as "IMT-Advanced" by the International Telecommunication Union-... Active Standard
802.16.1a-2013 - WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems --Amendment 2: Higher Reliability NetworksEnhancements to the WirelessMAN-Advanced Air Interface to support high-reliability networks are specified in this amendment to IEEE Std 802.16.1-2012. Active Standard
802.16.1b-2012 - WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems Amendment 1: Enhancements to Support Machine-to-Machine ApplicationsEnhancements to the Wireless MAN-Advanced Air Interface, an air interface designated as "IMT-Advanced" by the International Telecommunication... Active Standard
802.16.2-2001 - Recommended Practice for Recommended Practice for Coexistence of Fixed Broadband Wireless Access SystemsThis IEEE recommended practice provides guidelines for minimizing interference in fixed broadband wireless access (BWA) systems operating in the... Superseded Standard
802.16.2-2004 - Recommended Practice for Coexistence of Fixed Broadband Wireless Access SystemsIEEE Std 802.16.2 provides the IEEE recommended practice for local and metropolitan area networks with regard to the coexistence of fixed... Active Standard
802.16-2001/Conformance01-2003 - Conformance to 802.16 -- Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC Air InterfaceThis standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 (1995) and ITU-T X.296, for conformance... Withdrawn Standard
802.16a-2003 - Amendment to Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Medium Access Control Modifications and Additional Physical Layer Specifications for 2-11 GHzThis document amends IEEE Std 802.16-2001 by enhancing the medium access control layer and providing additional physical layer specifications in... Superseded Standard
802.16c-2002 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Amendment 1: Detailed System Profiles for 10-66 GHzThis amendment updates and expands Clause 12 of IEEE Std 802.16-2001, which concerns system profiles that list sets of features and functions to... Superseded Standard
802.16f-2005 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Amendment 1: Management Information BaseThis document amends IEEE Std 802.16-2004 by defining a management information base (MIB) for the MAC and PHY and associated management procedures. Superseded Standard
802.16g-2007 - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Amendment 3: Management Plane Procedures and ServicesThis standard defines management procedures as enhancements to the IEEE 802.16 air interface standard for fixed and mobile broadband wireless... Superseded Standard
802.16h-2010 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 2: Improved Coexistence Mechanisms for License-Exempt OperationSuperseded by IEEE Std 802.16-2012. This amendment specifies improved mechanisms, as policies and medium access control enhancements, to enable... Superseded Standard
802.16j-2009 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 1: Multihop Relay SpecificationThis amendment specifies OFDMA physical layer and medium access control layer enhancements to IEEE Std 802.16 for licensed bands to enable the... Active Standard
802.16k-2007 - Media Access Control (MAC) Bridges - Amendment 2: Bridging of 802.16This document amends IEEE Std 802.1D, as previously amended by IEEE Std 802.17a¿-2004, to support the bridging of the IEEE 802.16 medium access... Superseded Standard
802.16m-2011 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 3: Advanced Air InterfaceThis amendment specifies the WirelessMAN-Advanced Air Interface, an enhanced air interface designated as "IMT-Advanced" by the International... Superseded Standard
802.16n-2013 - Air Interface for Broadband Wireless Access Systems--Amendment 2: Higher Reliability NetworksEnhancements to the WirelessMAN-OFDMA air interface to support higher reliability networks are specified in this amendment to IEEE Std 802.16-2012. Active Standard
802.16p-2012 - Air Interface for Broadband Wireless Access Systems--Amendment 1: Enhancements to Support Machine-to-Machine ApplicationsEnhancements to the Wireless MAN-OFDMA Air Interface, an air interface designated as "IMT-2000" by the International Telecommunication Union-Radio... Active Standard
802.17-2004 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer SpecificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Superseded Standard
802.17-2011 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Active Standard
802.17a-2004 - Media Access Control (MAC) Bridges - Amendment 1: Bridging of Std 802.17This amendment to IEEE Std 802.1D-2004 defines support of the internal sublayer service by the IEEE 802.17 MAC. Superseded Standard
802.17b-2007 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amendment 1 - Spatially Aware SublayerThis amendment enables a service provider to use the architecture and protocols of IEEE Std 802.17™-2004 to offer improvements in bandwidth... Superseded Standard
802.17c-2010 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specifications Amendment 2: Protected inter-ring connectionA service provider's use of the architecture and protocols of IEEE 802.17 to support ring interconnection through dual station homing, providing... Superseded Standard
802.19.1-2014 - Specific requirements -- Part 19: TV White Space Coexistence MethodsRadio technology independent methods for coexistence among dissimilar television band devices (TVBDs) and dissimilar or independently operated... Active Standard
802.20-2008 - Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility -- Physical and Media Access Control Layer SpecificationThe technical requirements of this standard form a compatibility standard for mobile broadband wireless access systems. The standard ensures that... Active Standard
802.20.2-2010 - Conformance to 802.20 Systems--Protocol Implementation Conformance Statement (PICS) ProformaThis standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 and ITU-T X.296, for conformance... Active Standard
802.20.3-2010 - Minimum Performance Characteristics of 802.20 Terminals and Base Stations/Access NodesThis standard specifies minimum performance parameters and the associated test methodologies for implementation of IEEE 802.20 compliant systems.... Active Standard
802.20b-2010 - Virtual Bridged Local Area Networks Amendment 15: Bridging of 802.20This amendment specifies the mechanism for the support of bridging of IEEE 802.20 networks. Active Standard
802.21-2008 - Media Independent Handover ServicesThis standard specifies IEEE 802reg media access-independent mechanisms that optimize handovers between heterogeneous IEEE 802 systems and between... Active Standard
802.21a-2012 - Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and ProtocolAmendment to IEEE Std 802.21-2008. Extensions to IEEE Std 802.21-2008 are provided for security mechanisms to protect media independent handover... Active Standard
802.21b-2012 - Part 21: Media Independent Handover Services Amendment 2: Extension for Supporting Handovers with Downlink Only TechnologiesAmendment to IEEE Std 802.21-2008. Extensions to IEEE Std 802.21(TM)-2008 for handovers with downlink only technologies is discussed in the... Active Standard
802.21c-2014 - Part 21: Media Independent Handover Services - Amendment 3: Optimized Single Radio HandoversAdditional IEEE 802(R) media access independent mechanisms that optimize handovers between possibly heterogeneous IEEE 802 systems and between... Active Standard
802.22-2011 - Specific requirements-- Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Policies and procedures for operation in the TV BandsThis standard specifies the air interface, including the cognitive medium access control layer (MAC) and physical layer (PHY), of point-to... Active Standard
802.22.1-2010 - Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast BandsThis standard defines the protocol and data formats for communication devices forming a beaconing network that are used to protect low-power,... Active Standard
802a-2003 - Overview and Architecture - Amendment 1: Ethertypes for Prototype and Vendor-Specific Protocol DevelopmentIEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 Standards.... Superseded Standard
802b-2004 - Overview and Architecture - Amendment 2: Registration of Object IdentifiersIEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 standards.... Superseded Standard
1802.3-1991 - Conformance Test Methodology for Standards for CSMA/CD Access Method and Physical Layer Specifications - Currently Contains Attachment Unit Interface (AUI) Cable (Section 4)Methods for conformance testing to satisfy requirements arising from the ISO/IEC 8802-3 (ANSI/IEEE Std 802.3) standard are defined. The... Superseded Standard
1802.3-2001 - Conformance Test Methodology for IEEE Standards for Specific Requirements - Part 3: Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsAbstract methods for the conformance testing of 802.3 Clause 14 (10BASE-T MAU)implementations in order to satisfy conformance requirements arising... Withdrawn Standard
1802.3d-1993 - Conformance Test Methodology for Standards CSMA/CD Access Method and Physical Layer Specifications--Type 10BASE-T Medium Attachment Unit (MAU) (Section 6)Methods for conformance testing to satisfy requirements arising from the ISO/IEC 8802-3 [ANSI/IEEE Std 802.3] standard are defined. The... Superseded Standard
8802-1X-2013 - /ISO/IEC Information technology -- Part 1X: Port-based network access controlPort-based network access control allows a network administrator to restrict the use of IEEE 802(R) LAN service access points (ports) to secure... Active Standard
8802-1AB-2014 - ISO/IEC/International Part 1AB: Station and Media Access Control Connectivity DiscoveryThis document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in... Active Standard
8802-1AE-2013 - ISO/IEC/International Part 1AE: Media access control (MAC) securityThis standard specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by... Active Standard
8802.1AR-2014 - ISO/IEC/International Part 1AR: Secure device identityA secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. Locally... Active Standard
8802-1AS-2014 - ISO/IEC/International Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networksThis standard defines a protocol and procedures for the transport of timing over bridged and virtual bridged local area networks. It includes the... Active Standard
8802-2-1989 - Local Area Networks - Logic Link ControlThis standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open... Active Standard
8802-2-1994 - ISO/IEC 8802-2:1994: Information Technology - Specific requirements - Part 2: Logical link controlThis standard is part of a family of standards for local area networks (LANs) and metropolitan area networks (MANs) that deals with the physical... Superseded Standard
8802-2,Amd.3-1995 - Information technology -- Specific requirements -- Part 2: Logical link control Amendment 3: Conformance requirementsConformance requirements for ISO/IEC 8802-2: 1994 [ANSI/IEEE Std 802.2, 1994] are provided. Superseded Standard
8802-3-2000 - ISO/IEC 8802-3:2000 (Std 802.3, 2000 Edition) Information Technology--Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Active Standard
8802-3-2014 - ISO/IEC/International EthernetEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control ... Active Standard
8802-4-1990 - ISO/IEC 8802-4:1990: Information processing systems - Local area networks - Part 4:Token-passing bus access method and physical layer specificationsThis Local Area Network (LAN) standard, ISO/IEC 8802-4 : 1990 (ANSI/IEEE Std 802.4-1990), deals with all elements of the token-passing bus access... Active Standard
8802.5-1995 - ISO/IEC 8802-5:1995 : Information Technology Processing Systems - Specifc requirements, Part 5:Token ring access method and physical Layer SpecificationThis Local and Metropolitan Area Network standard, ISO/IEC 8802-5: 1995, is part of a family of local area network (LAN) standards dealing with... Active Standard
8802-9-1996 - ISO/IEC/International Standard Information technology - Specific requirements - Part 9: Integrated Services (IS) LAN Interface at the Medium Access Control (MAC) and Physical (PHY) LayersA unified access method that offers integrated services (IS) to the desktop for a variety of publicly and privately administered backbone networks... Withdrawn Standard
8802-11-2005 - ISO/IEC 8802-11: 1999 [Std 802.11-1999(R2003)] Information technology--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, which is part... Superseded Standard
8802-11:2005/AMD5-2006 - ISO/IEC 8802-11:1999/AMD5 (E) [Std 802.11h-2003] Information technology-- Part 11: Amendment 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in EuropeThis amendment specifies the extensions to IEEE 802.11(TM) for wireless local area networks (WLANs) providing mechanisms for dynamic frequency... Active Standard
8802-11-2012 - ISO/IEC/Information technology--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
11073-10472-2010 - Personal health device communication--Part 10472: Device specialization--Medication monitorWithin the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of... Active Standard