Standard Icon

Transportation Standards

Displaying results 41 - 80 of 125
Standard Name
Status Help less all
1512.2-2004 - Public Safety Traffic Incident Management Message Sets for Use By Emergency Management CentersThis standard addresses the exchange of vital data about public safety issues involved in transportation-related events, through common incident... Withdrawn Standard
1512.3-2002 - Hazardous Material Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about hazardous material and other cargo and contents of vehicles and buildings involved in... Superseded Standard
1512.3-2006 - Hazardous Material Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about public safety issues involved in transportation-related events, through common incident... Active Standard
1536-2002 - Rail Transit Vehicle Battery Physical InterfaceThe maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity or performance rating are prescribed... Active Standard
1558-2004 - Software Documentation for Rail Equipment and SystemsThe IEEE Standard for Software Documentation for Rail Equipment and Systems is presented. This standard establishes the minimum requirements for... Active Standard
1568-2003 - Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger VehiclesA method for defining the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is described in this... Active Standard
1570-2002 - the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail IntersectionThe logical and physical interfaces and the performance attributes for the interface between the rail subsystem and the highway subsystem at a... Active Standard
1580-2001 - Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating PlatformsRequirements are given for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV, intended to be... Superseded Standard
1580-2010 - Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating FacilitiesRequirements are given for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV, intended to be... Active Standard
1609.0-2013 - Guide for Wireless Access in Vehicular Environments (WAVE) - ArchitectureThe wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile vehicular... Active Standard
1609.1-2006 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Resource ManagerThis standard specifies a wireless access in vehicular environments (WAVE) dedicated short-range communications (DSRC) application, known as the... Withdrawn Standard
1609.2-2006 - Trial-Use Wireless Access in Vehicular Environments - Security Services for Applications and Management MessagesSecure message formats, and the processing of those secure messages, within the DSRC/WAVE system are defined. The standard covers methods for... Withdrawn Standard
1609.2-2013 - Wireless Access in Vehicular Environments — Security Services for Applications and Management MessagesSecure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE... Superseded Standard
1609.2-2016 - Wireless Access in Vehicular Environments--Security Services for Applications and Management MessagesThis standard defines secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods... Active Standard
1609.3-2007 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Networking ServicesWAVE networking services provides services to WAVE devices and systems. It represents roughly layers 3 and 4 of the OSI model and the IP, UDP, and... Superseded Standard
1609.3-2010 - Wireless Access in Vehicular Environments (WAVE) - Networking ServicesWireless Access in Vehicular Environments (WAVE) Networking Services provides services to WAVE devices and systems. Layers 3 and 4 of the open... Superseded Standard
1609.3-2010/Cor 1-2012 - Wireless Access in Vehicular Environments (WAVE)--Networking Services Corrigendum 1: Miscellaneous CorrectionsSeveral errors in IEEE Std 1609.3-2010 related to Gateway MAC Address, EDCA Parameter Set, and 3DLocationAndConfidence fields are addressed in... Superseded Standard
1609.3-2010/Cor 2-2014 - Wireless Access in Vehicular Environments (WAVE) -- Network Systems Corrigendum 2: Miscellaneous CorrectionsThis corrigendum corrects errors in IEEE Std 1609.3(TM)-2010 in the following areas: References to current documents including IEEE Std 1609.0TM,... Superseded Standard
1609.3-2016 - Wireless Access in Vehicular Environments (WAVE) -- Networking ServicesServices to WAVE devices and systems are provided in IEEE Std 1609.3(TM), IEEE Standard for Wireless Access in Vehicular Environments (WAVE)... Active Standard
1609.4-2006 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Multi-Channel OperationMulti-channel operation is an extension to the IEEE 802.11 WAVE mode that describes how to support a multi-channel system with the IEEE 802.11... Withdrawn Standard
1609.4-2010 - Wireless Access in Vehicular Environments (WAVE)--Multi-channel OperationMulti-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers ... Superseded Standard
1609.4-2010/Cor 1-2014 - Wireless Access in Vehicular Environments (WAVE) -- Multi-channel Operation Corrigendum 1: Miscellaneous CorrectionsThis corrigendum corrects errors in IEEE Std 1609.4 TM -2010 in the following areas: References to current documents including IEEE Std 1609.0(TM)... Superseded Standard
1609.4-2016 - Wireless Access in Vehicular Environments (WAVE) -- Multi-Channel OperationMulti-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers ... Active Standard
1609.11-2010 - Wireless Access in Vehicular Environments (WAVE)-- Over-the-Air Electronic Payment Data Exchange Protocol for Intelligent Transportation Systems (ITS)This standard specifies the electronic payment service layer and profile for Payment and Identity authentication, and Payment Data transfer for... Active Standard
1609.12-2012 - Wireless Access in Vehicular Environments (WAVE) - Identifier AllocationsWireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers are used.... Superseded Standard
1609.12-2016 - Wireless Access in Vehicular Environments (WAVE) - Identifier AllocationsWireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers are used.... Active Standard
1616-2004 - Motor Vehicle Event Data Recorder (MVEDR)A performance standard for MVEDR data collection, storage, and retrieval, to ensure that comparable event data parameters are generated by all... Active Standard
1616a-2010 - Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: MVEDR Connector Lockout Apparatus (MVEDRCLA)This amendment adds information pertaining to motor vehicle event data recorder connector lockout apparatus (MVEDRCLA) by revision. Active Standard
1628-2009 - Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit SystemsThis recommended practice provides a set of guidelines that can be used by the operators of new start-up systems seeking guidance in developing... Active Standard
1629-2013 - Performance of DC Overhead Current Collectors for Rail Transit VehiclesThe general characteristics of pantographs that enable current collection from an overhead contact system on light rail and heavy rail transit... Active Standard
1630-2012 - Supporting Structures for Overhead Contact Systems for Transit SystemsMinimum structural requirements for structural supports used for overhead contact systems for heavy rail, light rail, and trolley bus systems,... Active Standard
1653.2-2009 - Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DC Nominal OutputDesign, manufacturing, and testing unique to the application of uncontrolled semiconductor power rectifiers for dc supplied transportation... Active Standard
1653.3-2012 - Guide for Rail Transit Traction Power Systems ModelingA description of the data, techniques, and procedures typically used in modeling and analysis of traction power systems is provided in this guide. Active Standard
1653.4-2011 - DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC NominalThis standard defines field testing and acceptance criteria for transportation system applications powered by a dc traction power system up to... Active Standard
1653.6-2013 - Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution FacilitiesThe grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required... Active Standard
1662-2008 - Guide for the Design and Application of Power Electronics in Electrical Power Systems on ShipsThis guide applies to power electronics components and systems on ships and similar applications. It summarizes current electrical engineering... Active Standard
1698-2009 - Guide for the Calculation of Braking Distances for Rail Transit VehiclesThe design of automatic train protection and signal systems for fixed guideway (e.g. rail) transit systems requires knowledge of the braking... Active Standard
1709-2010 - Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on ShipsGuidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of... Active Standard
1826-2012 - Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kWOpen system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in... Active Standard
2030-2011 - Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and LoadsIEEE Std 2030 provides alternative approaches and best practices for achieving smart grid interoperability. It is the first all-encompassing IEEE... Active Standard
Displaying results 41 - 80 of 125 - all results