Standard Icon

Transportation Standards

Standard Name
Status Help less all
11-1980 - Rotating Electric Machinery for Rail and Road VehiclesThis IEEE standard applies to rotating electric machinery which forms part of the propulsion and major auxiliary equipment on internally and... Superseded Standard
11-2000 - Rotating Electric Machinery for Rail and Road VehiclesThis standard applies to rotating electric machinery which forms part of the propulsion and major auxiliary equipment on internally and externally... Active Standard
16-2004 - Electrical and Electronic Control Apparatus on Rail VehiclesThis standard is intended to provide a set of uniform design, application, and test requirements for electrical and electronic control apparatus... Active Standard
45-1998 - Recommended Practice for Electric Installations on ShipboardRecommendations for the selection and installation of equipment on merchant vessels with electric apparatus for lighting, signaling, communication... Superseded Standard
45-2002 - Recommended Practice for Electric Installations on ShipboardRecommendations for the design, selection, and installation of equipment on merchant vessels with electrical apparatus for lighting, signaling,... Active Standard
686-1990 - Standard Radar DefinitionsThis standard is published for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Withdrawn Standard
686-1997 - Standard Radar DefinitionsDefinitions for the purpose of promoting clarity and consistency in the use of radar terminology are provided. The definitions represent the... Superseded Standard
686-2008 - Standard Radar DefinitionsDefinitions are provided for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Active Standard
997-1985 - Standard Serial ASCII Instrumentation Loop (SAIL) Shipboard Data CommunicationThis standard was developed to provide a common digital methodology to access or exchange operational data aboard oceanographic research vessels.... Withdrawn Standard
1404-1998 - Guide for Microwave Communications System Development: Design, Procurement, Construction, Maintenance and OperationThe needs and requirements specific to the design, procurement, construction, maintenance, and operation of a microwave system are addressed.... Withdrawn Standard
1455-1999 - Message Sets for Vehicle/Roadside CommunicationsThose characteristics of a dedicated short-range communications (DSRC) system that are independent of the Physical and Data Link Layers (ISO model... Withdrawn Standard
1473-1999 - Communications Protocol Aboard TrainsCommunications protocols to be used for intercar and intracar serial data communications between subsystems aboard passenger trains are defined by... Superseded Standard
1473-2010 - Communications Protocol Aboard Passenger TrainsCommunications protocols to be used for inter-unit and intra-unit serial data communications between subsystems aboard passenger trains are... Active Standard
1474.1-1999 - Communication Based Train Control Performance Requirements and Functional RequirementsPerformance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is... Superseded Standard
1474.1-2004 - Communications-Based Train Control (CBTC) Performance and Functional RequirementsPerformance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is... Active Standard
1474.2-2003 - User Interface Requirements in Communications-Based Train Control (CBTC) SystemsUser interface requirements for communications-based train control (CBTC) subsystems are established in this standard. Active Standard
1474.3-2008 - Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional AllocationsThis recommended practice for communications-based train control (CBTC) system design and functional allocations builds on IEEE Std 1474.1 by... Active Standard
1474.4-2011 - Recommended Practice for Functional Testing of a Communications-Based Train Control (CBTC) SystemA preferred approach for functional testing of a communications-based train control (CBTC) system, based on the CBTC system design and functional... Active Standard
1475-1999 - the Functioning of and Interfaces Among Propulsion, Friction Brake, and Train-borne Master Control on Rail Rapid Transit VehiclesThe interfaces between and among functional systems on rail rapid transit vehicles is prescribed. The systems themselves are treated as "black... Superseded Standard
1475-2012 - the Functioning of Interfaces Among Propulsion, Friction Brake, and rain-Borne Master Control on Rail Rapid Transit VehiclesThe interfaces between and among functional systems on rail 1 rapid transit vehicles are prescribed. The systems themselves are treated as "black... Active Standard
1476-2000 - Passenger Train Auxiliary Power Systems InterfacesThe electrical interfaces among the components comprising the auxiliary power systems and their electrical interface with other train-borne... Active Standard
1477-1998 - Passenger Information System for Rail Transit VehiclesRail transit vehicle passenger information system interfaces with the vehicle's carbody, train crew, control system, power system, and passengers... Active Standard
1478-2001 - Environmental Conditions for Transit Rail Car Electronic EquipmentBaseline environmental conditions under which transit rail car electronic equipment shall both operate and/or survive are specified in this standard. Superseded Standard
1478-2013 - Environmental Conditions for Transit Railcar Electronic EquipmentBaseline environmental conditions under which transit railcar electronic equipment shall both operate and/or survive are specified in this standard. Active Standard
1482.1-1999 - Rail Transit Vehicle Event RecordersOn-board devices/systems, with crashworthy memory, that record data to support accident/incident analysis for rail transit vehicles, are covered.... Superseded Standard
1482.1-2013 - Rail Transit Vehicle Event RecordersOn-board devices/systems, with crashworthy memory, that record data to support accident/incident analysis for rail transit vehicles are covered.... Active Standard
1483-2000 - Verification of Vital Functions in Processor-Based Systems Used in Rail Transit ControlA set of standard verification tasks for processor-based equipment used in safety-critical applications on rail and transit systems is covered.... Active Standard
1488-2000 - Message Set Template for Intelligent Transportation SystemsThe expanding use of digital communications among subsystems of the transportation infrastructure has spawned the development of message sets for... Withdrawn Standard
1489-1999 - Data Dictionaries for Intelligent Transportation SystemsThe expanding use of digital communications among subsystems of the transportation infrastructure has spawned the development of data dictionaries... Withdrawn Standard
1512-2000 - Common Incident Management Message Sets for use by Emergency Management CentersThis standard addresses the exchange of vital data about transportation-related incidents among emergency management centers through common... Superseded Standard
1512-2006 - Common Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about public safety and emergency management issues involved in transportation-related events,... Active Standard
1512.1-2003 - Traffic Incident Management Message Sets for Use by Emergency Management CentersThe exchange of vital traffic management data and data to support traffic management decisions, between the Traffic Management Center and other... Superseded Standard
1512.1-2006 - Common Traffic Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about public safety and emergency management issues involved in transportation-related events,... Active Standard
1512.2-2004 - Public Safety Traffic Incident Management Message Sets for Use By Emergency Management CentersThis standard addresses the exchange of vital data about public safety issues involved in transportation-related events, through common incident... Withdrawn Standard
1512.3-2002 - Hazardous Material Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about hazardous material and other cargo and contents of vehicles and buildings involved in... Superseded Standard
1512.3-2006 - Hazardous Material Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about public safety issues involved in transportation-related events, through common incident... Active Standard
1536-2002 - Rail Transit Vehicle Battery Physical InterfaceThe maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity or performance rating are prescribed... Active Standard
1558-2004 - Software Documentation for Rail Equipment and SystemsThe IEEE Standard for Software Documentation for Rail Equipment and Systems is presented. This standard establishes the minimum requirements for... Active Standard
1568-2003 - Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger VehiclesA method for defining the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is described in this... Active Standard
1570-2002 - the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail IntersectionThe logical and physical interfaces and the performance attributes for the interface between the rail subsystem and the highway subsystem at a... Active Standard
1580-2001 - Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating PlatformsRequirements are given for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV, intended to be... Superseded Standard
1580-2010 - Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating FacilitiesRequirements are given for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV, intended to be... Active Standard
1609.0-2013 - Guide for Wireless Access in Vehicular Environments (WAVE) - ArchitectureThe wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile vehicular... Active Standard
1609.1-2006 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Resource ManagerThis standard specifies a wireless access in vehicular environments (WAVE) dedicated short-range communications (DSRC) application, known as the... Withdrawn Standard
1609.2-2006 - Trial-Use Wireless Access in Vehicular Environments - Security Services for Applications and Management MessagesSecure message formats, and the processing of those secure messages, within the DSRC/WAVE system are defined. The standard covers methods for... Withdrawn Standard
1609.2-2013 - Wireless Access in Vehicular Environments — Security Services for Applications and Management MessagesSecure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE... Active Standard
1609.3-2007 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Networking ServicesWAVE networking services provides services to WAVE devices and systems. It represents roughly layers 3 and 4 of the OSI model and the IP, UDP, and... Superseded Standard
1609.3-2010 - Wireless Access in Vehicular Environments (WAVE) - Networking ServicesWireless Access in Vehicular Environments (WAVE) Networking Services provides services to WAVE devices and systems. Layers 3 and 4 of the open... Active Standard
1609.3-2010/Cor 1-2012 - Wireless Access in Vehicular Environments (WAVE)--Networking Services Corrigendum 1: Miscellaneous CorrectionsSeveral errors in IEEE Std 1609.3-2010 related to Gateway MAC Address, EDCA Parameter Set, and 3DLocationAndConfidence fields are addressed in... Active Standard
1609.4-2006 - Trial-Use Wireless Access in Vehicular Environments (WAVE) - Multi-Channel OperationMulti-channel operation is an extension to the IEEE 802.11 WAVE mode that describes how to support a multi-channel system with the IEEE 802.11... Withdrawn Standard
1609.4-2010 - Wireless Access in Vehicular Environments (WAVE)--Multi-channel OperationMulti-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers ... Active Standard
1609.11-2010 - Wireless Access in Vehicular Environments (WAVE)-- Over-the-Air Electronic Payment Data Exchange Protocol for Intelligent Transportation Systems (ITS)This standard specifies the electronic payment service layer and profile for Payment and Identity authentication, and Payment Data transfer for... Active Standard
1609.12-2012 - Wireless Access in Vehicular Environments (WAVE) - Identifier AllocationsWireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers are used.... Active Standard
1616-2004 - Motor Vehicle Event Data Recorder (MVEDR)A performance standard for MVEDR data collection, storage, and retrieval, to ensure that comparable event data parameters are generated by all... Active Standard
1616a-2010 - Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: MVEDR Connector Lockout Apparatus (MVEDRCLA)This amendment adds information pertaining to motor vehicle event data recorder connector lockout apparatus (MVEDRCLA) by revision. Active Standard
1628-2009 - Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit SystemsThis recommended practice provides a set of guidelines that can be used by the operators of new start-up systems seeking guidance in developing... Active Standard
1629-2013 - Performance of DC Overhead Current Collectors for Rail Transit VehiclesThe general characteristics of pantographs that enable current collection from an overhead contact system on light rail and heavy rail transit... Active Standard
1630-2012 - Supporting Structures for Overhead Contact Systems for Transit SystemsMinimum structural requirements for structural supports used for overhead contact systems for heavy rail, light rail, and trolley bus systems,... Active Standard
1653.2-2009 - Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DC Nominal OutputDesign, manufacturing, and testing unique to the application of uncontrolled semiconductor power rectifiers for dc supplied transportation... Active Standard
1653.3-2012 - Guide for Rail Transit Traction Power Systems ModelingA description of the data, techniques, and procedures typically used in modeling and analysis of traction power systems is provided in this guide. Active Standard
1653.4-2011 - DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC NominalThis standard defines field testing and acceptance criteria for transportation system applications powered by a dc traction power system up to... Active Standard
1653.6-2013 - Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution FacilitiesThe grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required... Active Standard
1662-2008 - Guide for the Design and Application of Power Electronics in Electrical Power Systems on ShipsThis guide applies to power electronics components and systems on ships and similar applications. It summarizes current electrical engineering... Active Standard
1698-2009 - Guide for the Calculation of Braking Distances for Rail Transit VehiclesThe design of automatic train protection and signal systems for fixed guideway (e.g. rail) transit systems requires knowledge of the braking... Active Standard
1709-2010 - Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on ShipsGuidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of... Active Standard
1826-2012 - Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kWOpen system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in... Active Standard
2030-2011 - Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and LoadsIEEE Std 2030 provides alternative approaches and best practices for achieving smart grid interoperability. It is the first all-encompassing IEEE... Active Standard
C136.1-1991 - American National Roadway Lighting - Filament Lamps - Guide for SelectionThis is a guide for the proper selection of filament lamps for use in roadway lighting equipment covered by the following American National... Superseded Standard
C136.2-1985 - American National Roadway Lighting - Luminaires - Voltage ClassificationThis standard covers three voltage classifications for luminaires used for roadway lighting. Superseded Standard
C136.2-1996 - American National Roadway Lighting Equipment - Luminaires Voltage ClassificationThis IEEE Standards product is part of the C136 family on Roadway Lighting. Three voltage classifications for luminaires used in roadway lighting... Withdrawn Standard
C136.3-1995 - American National Roadway Lighting Equipment - Luminaire Attachments (Revision of ANSI C136.3-1989)This IEEE Standards product is part of the C136 family on Roadway Lighting. Attachment features of luminaires used in roadway lighting equipment... Withdrawn Standard
C136.4-1995 - American National Roadway Lighting Equipment - Series Sockets and Series-Socket ReceptaclesThis IEEE Standards product is part of the C136 family on Roadway Lighting. Equipment for luminaires for lighting roadways is covered in the... Withdrawn Standard
C136.5-1996 - American National Roadway Lighting Equipment - Film Cutouts (Reaffirmation of C136.5-1969)This IEEE Standards product is part of the C136 family on Roadway Lighting. Operating and dimensional features of single-shot film cutouts used... Withdrawn Standard
C136.6-1990 - American National Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical InterchangeabilityThis standard covers dimensional features of luminaires with metal heads that permit mechanical and optical interchangeability of both head and... Superseded Standard
C136.6-1997 - American National Roadway Lighting Equipment--Metal Heads and Reflector Assemblies--Mechanical and Optical InterchangeabilityThis IEEE Standards product is part of the C136 family on Roadway Lighting. Dimensional features of luminaires with metal heads that permit... Withdrawn Standard
C136.9-1990 - American National Roadway Lighting Equipment - Socket Support Assemblies for Metal Heads - Mechanical InterchangeabilityThe purpose of this standard is to permit mechanical interchangeability of the socket support assemblies. Superseded Standard
C136.10-1996 - American National Roadway Lighting Equipment--Locking-Type Photocontrol Devices and Mating Receptacle Physical and Electrical Interchangeability and TestingThis IEEE Standards product is part of the C136 family on Roadway Lighting. Equipment that may be physically and electrically interchanged to... Withdrawn Standard
C136.11-1995 - American National Roadway Lighting Equipment - Multiple SocketsThis IEEE Standards product is part of the C136 family on Roadway Lighting. Medium and mogul multiple sockets as used in luminaires designed and... Withdrawn Standard
C136.12-1996 - American National Roadway Lighting Equipment--Mercury Lamps--Guide for SelectionThis IEEE Standards product is part of the C136 family on Roadway Lighting. Methods for selecting mercury lamps that are recommended for use in... Withdrawn Standard
C136.13-1987 - American National Roadway Lighting - Metal Brackets for Wood PolesThis IEEE Standards product is part of the C136 family on Roadway Lighting. Metal pipe, tubing, and structural brackets for wood poles designed to... Superseded Standard
C136.14-1988 - American National Roadway Lighting Equipment - Enclosed side-mounted Luminaires for Horizontal-burning high-intensity-discharge lampsThis standard covers dimensional, maintenance, and light distribution features that permit the interchange of enclosed side-mounted luminaires for... Withdrawn Standard
C136.15-1986 - American National Roadway Lighting - High-intensity-Discharge and Low-Pressure-Sodium Lamps in Luminaires - Field IdentificationThis standard is intended to provide a simple, uniform method for identifying the type and wattage rating of a high-intensity-discharge or low... Superseded Standard
C136.15-1997 - American National Roadway Lighting Equipment--High-Intensity-Discharge and Low-Pressure-Sodium Lamps in Luminaires--Field IdentificationThis IEEE Standards product is part of the C136 family on Roadway Lighting. A simple, uniform method for identifying the type and wattage rating... Withdrawn Standard
C136.16-1990 - ANSI Roadway Lighting - Enclosed Post Top-Mounted LuminairesThis standard covers dimensional, maintenance, and light distribution features that will permit interchange of post top-mounted luminaires whose... Superseded Standard
C136.16-1997 - American National Roadway Lighting Equipment - Enclosed Post Top-Mounted LuminairesThis IEEE Standards product is part of the C136 family on Roadway Lighting. Abstract: Dimensional, maintenance, and light distribution features... Withdrawn Standard
C136.17-1997 - American National Roadway Lighting Equipment--Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps--Mechanical Interchangeability of RefractorsThe dimensional features and the material of refractors as described in ANSI C136.14-1988, American National Standard for Roadway Lighting... Withdrawn Standard
C136.18-1987 - ANSI Roadway Lighting - High-Mast Luminaires for Horizontal-or Vertical-Burning High-Intensity Discharge LampsThis IEEE Standards product is part of the C136 family on Roadway Lighting. Physical,operational,maintenance,and light-distribution features that... Superseded Standard
C136.18-1999 - ANSI Roadway Lighting - High-Mast Side-Mounted Luminaires for Horizontal-or Vertical-Burning High-Intensity Discharge LampsPhysical, operational, maintenance, and light-distribution features that permit use ofhigh-mast luminaires in roadway applications when so... Withdrawn Standard
C136.19-1987 - ANSI Roadway Lighting - High-Pressure Sodium Lamps - Guide for SelectionThis guide covers the selection of high-pressure sodium lamps recommended for use in roadway lighting equipment. Superseded Standard
C136.19-1997 - American National Roadway Lighting Equipment - High-Pressure Sodium Lamps - Guide for SelectionThis IEEE Standards product is part of the C136 family on Roadway Lighting. The selection of high-pressure sodium lamps recommended for use in... Withdrawn Standard
C136.20-1990 - ANSI Roadway Lighting Equipment - Fiber-Reinforced Plastic (FPR) Lighting PolesThis standard applies to fiber-reinforced plastic (FRP) roadway lighting poles. It includes nomenclature, dimensional data, performance criteria,... Superseded Standard
C136.21-1987 - ANSI Roadway Lighting - Vertical Tenons Used with Post-Top-Mounted LuminairesThis standard covers the attachment features of vertical tenons on pole tops or brackets used in roadway lighting that permit the... Withdrawn Standard
C136.22-1988 - ANSI Roadway Lighting Equipment - Internal Labeling of LuminairesThis standard covers internal luminaire identification labels for all styles of luminaires used in roadway lighting. Withdrawn Standard
C136.23-1997 - American National Roadway Lighting-Enclosed Architectural LuminairesThis IEEE Standards product is part of the C136 family on Roadway Lighting. Physical, operating, maintenance, and light distribution features that... Withdrawn Standard
C136.27-1996 - American National Roadway Lighting Equipment-Tunnel Lighting LuminairesThis IEEE Standards product is part of the C136 family on Roadway Lighting. Luminaires used for illuminating roadway tunnels are covered. The... Withdrawn Standard
C136.31-1999 - American National Roadway Lighting Equipment-Luminaire VibrationThis IEEE Standards product is part of the C136 family on Roadway Lighting. The minimum vibration withstand capability and vibration test methods... Withdrawn Standard
C136.32-1999 - American National Roadway Lighting Equipment--Enclosed Setback Luminaries and Directional Floodlights for High-Intensity-Discharge LampsThis IEEE Standards product is part of the C136 family on Roadway Lighting. Dimensional, maintenance, and electrical features that permit the... Withdrawn Standard
C136.33-1999 - American National Roadway Lighting Equipment--Plug-in Type Receptacle and Plug for High-Intensity-Discharge (HID) Lamp IgnitorsAdminstratively WIthdrawn Covers the physical features, dimensions and electrical requirements of mating receptacles for plug-in type HID lamp... Withdrawn Standard