Project Icon

Transportation Standards

Displaying results 1 - 40 of 77
1 2
Transportation Standards
Status Help
16-1955 - IEEE Standard for Electric Control Apparatus for Land Transportation VehiclesThe standards in this section apply to the control apparatus on all land transportation vehicles. withdrawn Standard
16-2004 - IEEE Standard for Electrical and Electronic Control Apparatus on Rail VehiclesRevision of IEEE Std 16-1955. This standard is intended to provide a set of uniform design, application, and test requirements for elect ... active Standard
263-1965 - IEEE Standard for Measurement of Radio Noise Generated by Motor Vehicles and Affecting Mobile Communications Receivers in the Frequency Range 25-1000 megahertzThe purpose of this Standard is to provide a uniform method of measurement of radio noise generated by a motor vehicle, which may affect ... withdrawn Standard
1404-1998 - IEEE Guide for Microwave Communications System Development: Design, Procurement, Construction, Maintenance and OperationThe needs and requirements specific to the design, procurement, construction, maintenance, and operation of a microwave system are addre ... withdrawn Standard
1455-1999 - IEEE Standard for Message Sets for Vehicle/Roadside Communications" Those characteristics of a dedicated short-range communications (DSRC) system thatare independent of the Physical and Data Link Layers ... withdrawn Standard
1473-2010 - IEEE Standard for Communications Protocol Aboard Passenger TrainsCommunications protocols to be used for inter-unit and intra-unit serial data communications between subsystems aboard passenger trains ... active Standard
1474.1-2004 - IEEE Standard for Communications-Based Train Control (CBTC) Performance and Functional RequirementsThis standard establishes a set of performance and functional requirements necessary for enhancing performance, availability, operations ... active Standard
1474.2-2003 - IEEE Standard for User Interface Requirements in Communications-Based Train Control (CBTC) SystemsThis standard will provide for consistent user interfaces that take advantage of the characteristics of communications-based train contr ... active Standard
1474.3-2008 - IEEE Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional AllocationsThis recommended practice establishes a preferred system design and functional allocation for CBTC systems. active Standard
1475-2012 - IEEE Standard for the Functioning of Interfaces Among Propulsion, Friction Brake, and rain-Borne Master Control on Rail Rapid Transit VehiclesThe interfaces between and among functional systems on rail 1 rapid transit vehicles are prescribed. The systems themselves are treated ... active Standard
1476-2000 - IEEE Standard for Passenger Train Auxiliary Power Systems InterfacesThe electrical interfaces among the components comprising the auxiliary power systems and their electrical interface with other train-bo ... active Standard
1478-2013 - IEEE Standard for Environmental Conditions for Transit Railcar Electronic EquipmentBaseline environmental conditions under which transit railcar electronic equipment shall both operate and/or survive are specified in th ... active Standard
1482.1-2013 - IEEE Standard for Rail Transit Vehicle Event RecordersOn-board devices/systems, with crashworthy memory, that record data to support accident/incident analysis for rail transit vehicles are ... active Standard
1483-2000 - IEEE Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit ControlA set of standard verification tasks for processor-based equipment used in safety-critical applications on rail and transit systems is c ... active Standard
1488-2000 - IEEE Standard for Message Set Template for Intelligent Transportation SystemsThe expanding use of digital communications among subsystems of the transportation infrastructure has spawned the development of message ... withdrawn Standard
1489-1999 - IEEE Standard for Data Dictionaries for Intelligent Transportation SystemsAdministratively Withdrawn January 2007 The expanding use of digital communications among subsystems of the transportationinfrastructu ... withdrawn Standard
1512-2006 - IEEE Standard for Common Incident Management Message Sets for Use by Emergency Management CentersThis standard addresses the exchange of vital data about public safety and emergency management issues involved in transportation-relat ... active Standard
1512.1-2006 - IEEE Standard for Common Traffic Incident Management Message Sets for Use by Emergency Management CentersRevision of IEEE Std 1512.1-2003 This standard addresses the exchange of vital data about public safety and emergency management issue ... active Standard
1512.2-2004 - IEEE Standard for Public Safety Traffic Incident Management Message Sets for Use By Emergency Management CentersThis standard addresses the exchange of vital data about public safety issues involved in transportation-related events, through common ... withdrawn Standard
1512.3-2006 - IEEE Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management CentersRevision of IEEE Std 1512.3-2002. This standard addresses the exchange of vital data about public safety issues involved in transporta ... active Standard
1536-2002 - IEEE Standard for Rail Transit Vehicle Battery Physical InterfaceThis standard prescribes the maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity r ... active Standard
1558-2004 - IEEE Standard for Software Documentation for Rail Equipment and SystemsThis standard provides an outline for the software documentation that shall be developed and delivered for rail equipment and systems. active Standard
1568-2003 - IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles method for de ning the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is describe ... active Standard
1570-2002 - IEEE Standard for the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail IntersectionThis standard defines the logical and physical interfaces, and the performance attributes for the data communication interfaces between ... active Standard
1609.0-2013 - IEEE Guide for Wireless Access in Vehicular Environments (WAVE) - ArchitectureThe wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile veh ... active Standard
1609.1-2006 - Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) - Resource ManagerThis standard specifies a wireless access in vehicular environments (WAVE) dedicated short-range communications (DSRC) application, know ... withdrawn Standard
1609.2-2006 - Trial-Use Standard for Wireless Access in Vehicular Environments - Security Services for Applications and Management MessagesSecure message formats, and the processing of those secure messages, within the DSRC/WAVE system are defined. The standard covers method ... withdrawn Standard
1609.2-2016 - IEEE Standard for Wireless Access in Vehicular Environments--Security Services for Applications and Management MessagesThis standard defines secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, includi ... active Standard
1609.2a-2017 - IEEE Standard for Wireless Access in Vehicular Environments--Security Services for Applications and Management Messages - Amendment 1Secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure W ... active Standard
1609.3-2016 - IEEE Standard for Wireless Access in Vehicular Environments (WAVE) -- Networking ServicesServices to WAVE devices and systems are provided in IEEE Std 1609.3(TM), IEEE Standard for Wireless Access in Vehicular Environments (W ... active Standard
1609.4-2006 - IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel OperationMulti-channel operation is an extension to the IEEE 802.11™ WAVE mode that describes how to support a multi-channel system with the IE ... withdrawn Standard
1609.4-2016 - IEEE Standard for Wireless Access in Vehicular Environments (WAVE) -- Multi-Channel OperationMulti-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physica ... active Standard
1609.11-2010 - IEEE Standard for Wireless Access in Vehicular Environments (WAVE)-- Over-the-Air Electronic Payment Data Exchange Protocol for Intelligent Transportation Systems (ITS)This standard specifies the electronic payment service layer and profile for Payment and Identity authentication, and Payment Data trans ... active Standard
1609.12-2016 - IEEE Standard for Wireless Access in Vehicular Environments (WAVE) - Identifier AllocationsWireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers ... active Standard
1616-2004 - IEEE Standard for Motor Vehicle Event Data Recorder (MVEDR)Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This sta ... active Standard
1616a-2010 - IEEE Standard for Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: MVEDR Connector Lockout Apparatus (MVEDRCLA)This amendment adds information pertaining to motor vehicle event data recorder connector lockout apparatus (MVEDRCLA) by revision. active Standard
1621-2004 - IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer EnvironmentsThis standard covers the user interface for the power status control of electronic devices that ordinary people commonly interact with i ... active Standard
1628-2009 - IEEE Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit SystemsThis recommended practice provides a set of guidelines that can be used by the operators of new start-up systems seeking guidance in dev ... active Standard
1629-2013 - IEEE Standard for Performance of DC Overhead Current Collectors for Rail Transit VehiclesThe general characteristics of pantographs that enable current collection from an overhead contact system on light rail and heavy rail t ... active Standard
1630-2012 - IEEE Standard for Supporting Structures for Overhead Contact Systems for Transit SystemsMinimum structural requirements for structural supports used for overhead contact systems for heavy rail, light rail, and trolley bus sy ... active Standard