Standard Icon

Software and Systems Engineering Standards

Displaying results 81 - 120 of 366
Standard Name
Status Help less all
802.11k-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 1: Radio Resource Measurement of Wireless LANsThis amendment specifies the extensions to IEEE Std 802.11 for Wireless LANs providing mechanisms for Radio Resource Measurement. Superseded Standard
802.11n-2009 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Higher ThroughputThis amendment defines modifications to both the 802.11 physical layers (PHY) and the 802.11 Medium Access Control Layer (MAC) so that modes of... Superseded Standard
802.11p-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 6: Wireless Access in Vehicular EnvironmentsThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing wireless communications while in a... Superseded Standard
802.11r-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Fast Basic Service Set (BSS) TransitionThis amendment specifies the extensions to IEEE Std 802.11-2007 for wireless local area networks (WLANs) providing mechanisms for fast basic... Superseded Standard
802.11s-2011 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 10: Mesh NetworkingThis amendment describes protocols for IEEE 802.11 stations to form self-configuring multi-hop networks that support both broadcast/multicast and... Superseded Standard
802.11u-2011 - Local and Metropolitan networks-specific requirements-Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 9: Interworking with External NetworksThis amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) that support wireless local area network (WLAN) interworking... Superseded Standard
802.11v-2011 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 8: 802.11 Wireless Network ManagementThis amendment provides Wireless Network Management enhancements to the IEEE 802.11 MAC, and PHY, extending radio measurements to effect a... Superseded Standard
802.11w-2009 - Specific requirements. Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Protected Management FramesThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for protecting management... Superseded Standard
802.11y-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: 3650-3700 MHz Operation in USAThis amendment defines enhancements to the IEEE 802.11 physical layer (PHY) and medium access control (MAC) to support operation in the 3650¿3700... Superseded Standard
802.11z-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 7: Extensions to Direct-Link Setup (DLS)This amendment provides direct-link setup enhancements to the IEEE 802.11 MAC and PHY, extending direct-link setup to be independent of the access... Superseded Standard
802.11aa-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: MAC Enhancements for Robust Audio Video StreamingAmendment to IEEE Std 802.11(TM)-2012.This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) for robust audio video ... Active Standard
802.11ac-2013 - —Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications--Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz.The purpose of this amendment is to improve the IEEE 802.11™ wireless local area network (WLAN) user experience by providing significantly higher... Active Standard
802.11ad-2012 - Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz BandThis amendment defines modifications to both the IEEE 802.11 physical layers (PHYs) and the IEEE 802.11 medium access control layer (MAC) to... Active Standard
802.11ae-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management FramesA mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified... Active Standard
802.11af-2013 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Television White Spaces (TVWS) OperationEnhancements to the IEEE 802.11 physical layers (PHYs) and medium access control (MAC) sublayer to support operation in the white spaces in... Active Standard
802.12c-1998 - Supplement to Information Technology--Specific requirements--Part 12: Demad-priority access method, physical layer and repeater specifications: Full-Duplex OperationOptional MAC capabilities are defined to allow direct link connection between two end nodes with provision for both half-duplex and full-duplex... Withdrawn Standard
802.15.1-2002 - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)The lower transport layers [(Logical Link Control and Adaptation Protocol (L2CAP), Link Manager Protocol (LMP), baseband and radio] of the... Superseded Standard
802.15.2-2003 - Recommended Practice for Information technology-- Specific requirements-- Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless Devices Operating in Unlicensed Frequency BandsThis recommended practice addresses the issue of coexistence of wireless local area networks and wireless personal area networks. These wireless... Active Standard
802.15.3-2003 - Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz radio transmissions in a Wireless Personal... Active Standard
802.15.3c-2009 - Specific requirements-- Part 15.3: Amendment 2: Millimeter-wave-based Alternative Physical Layer ExtensionThis amendment defines and alternative physical layer (PHY) for IEEE Std 802.15.3-2003. Three PHY modes have been defined that enable data rates... Active Standard
802.15.4-2003 - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN)This standard defines the protocol and compatible interconnection for data communication devices using low data rate, low power and low complexity... Superseded Standard
802.15.4-2006 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs)IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low... Superseded Standard
802.15.4-2011 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio... Active Standard
802.15.4a-2007 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHYsThis standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity... Superseded Standard
802.15.4c-2009 - Specific requirements-- Part 15.4: Amendment 2: Alternative Physical Layer Extension to support one or more of the Chinese 314-316 MHz, 430-434 MHz, and 779-787 MHz bandsThis amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations,... Superseded Standard
802.15.4d-2009 - Specific requirements-- Part 15.4: Amendment 3: Alternative Physical Layer Extensionto support the Japanese 950 MHz bandsThis amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency... Superseded Standard
802.15.4e-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayerIEEE Std 802.15.4-2011 is amended by this standard. The intention of this amendment is to enhance and add functionality to the IEEE 802.15.4 MAC... Active Standard
802.15.4f-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY)This amendment provides two PHYs (MSK and LRP UWB) that can be used in a wide range of applications requiring various combinations of low cost,... Active Standard
802.15.4g-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility NetworksIn this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate... Active Standard
802.15.5-2009 - Recommended Practice for Information technology-- Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs)This IEEE recommended practice defines the architectural framework that enables WPAN devices to promote interoperable, stable, and scaleable... Active Standard
802.15.6-2012 - Part 15.6: Wireless Body Area NetworksShort-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It... Active Standard
802.17-2004 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer SpecificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Superseded Standard
802.17-2011 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Active Standard
802.17a-2004 - Media Access Control (MAC) Bridges - Amendment 1: Bridging of Std 802.17This amendment to IEEE Std 802.1D-2004 defines support of the internal sublayer service by the IEEE 802.17 MAC. Superseded Standard
802.17b-2007 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amendment 1 - Spatially Aware SublayerThis amendment enables a service provider to use the architecture and protocols of IEEE Std 802.17™-2004 to offer improvements in bandwidth... Superseded Standard
802.17c-2010 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specifications Amendment 2: Protected inter-ring connectionA service provider's use of the architecture and protocols of IEEE 802.17 to support ring interconnection through dual station homing, providing... Superseded Standard
802.19.1-2014 - Specific requirements -- Part 19: TV White Space Coexistence MethodsRadio technology independent methods for coexistence among dissimilar television band devices (TVBDs) and dissimilar or independently operated... Active Standard
802.22-2011 - Specific requirements-- Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Policies and procedures for operation in the TV BandsThis standard specifies the air interface, including the cognitive medium access control layer (MAC) and physical layer (PHY), of point-to... Active Standard
802.22.1-2010 - Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast BandsThis standard defines the protocol and data formats for communication devices forming a beaconing network that are used to protect low-power,... Active Standard
Displaying results 81 - 120 of 366 - all results