Standard Icon

Software and Systems Engineering Standards

Standard Name
Status Help less all
8802-15-4-2010 - Information technology -- Specific requirements -- Part 15-4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs) Active Standard
16326-2009 - ISO/IEC/IEEE Systems and Software Engineering--Life Cycle Processes--Project ManagementISO/IEC/IEEE 16326:2009 provides normative content specifications for project management plans covering software projects, and software-intensive... Active Standard
802.22-2011 - Specific requirements-- Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Policies and procedures for operation in the TV BandsThis standard specifies the air interface, including the cognitive medium access control layer (MAC) and physical layer (PHY), of point-to... Active Standard
24765-2010 - Systems and software engineering -- VocabularyISO/IEC/IEEE 24765:2010 provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and... Active Standard
26511-2012 - Systems and software engineering -- Requirements for managers of user documentationISO/IEC/IEEE 26511:2012 specifies procedures for managing user documentation throughout the software life cycle. It applies to people or... Active Standard
802.3bf-2011 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 7: Media Access Control (MAC) Service Interface and Management Parameters to Support Time Synchronization ProtocolsThis amendment to IEEE Std 802.3 defines the Time Synchronization Service Interface (TSSI) to indicate when the Start Frame Delimiter (SFD)... Active Standard
802.11ae-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management FramesA mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified... Active Standard
802.17-2011 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Active Standard
14102-2010 - Adoption of ISO/IEC 14102:2008 Information Technology--Guideline for the Evaluation and Selection of CASE ToolsThis standard adopts ISO/IEC 14102:2008 and defines both a set of processes and a structured set of computer-aided software engineering (CASE)... Active Standard
802.3bg-2011 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 6: Physical Layer and Management Parameters for Serial 40 Gb/s Ethernet Operation Over Single Mode FiberThis amendment to IEEE Std 802.3™-2008 specifies a new Physical Medium Dependent (PMD) sublayer, 40GBASE-FR, for serial 40Gb/s operation over up... Active Standard
21450-2010 - Information technology -- Smart transducer interface for sensors and actuators -- Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.0-2007. This standard provides a common basis for members of the IEEE 1451 family of standards to be interoperable. It... Active Standard
21451-1-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 1: Network Capable Application Processor (NCAP) information modelAdoption of IEEE Std 1451.1-1999. This standard defines an object model with a network-neutral interface for connecting processors to... Active Standard
21451-2-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.2-1997. A digital interface for connecting transducers to microprocessors is defined. A Transducer Electronic Data... Active Standard
21451-4-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.2-1997. A digital interface for connecting transducers to microprocessors is defined. A Transducer Electronic Data... Active Standard
14471-2010 - Guide for Adoption of ISO/IEC TR 14471:2007 Information Technology -- Software Engineering -- Guidelines for the Adoption of CASE ToolsThis guide adopts ISO/IEC TR 14471:2007. Since computer-aided software engineering (CASE) adoption is a subject of the broader technology... Active Standard
26513-2010 - Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of DocumentationThis standard provides requirements for the test and review of software user documentation as part of the life cycle processes. It defines the... Active Standard
26514-2010 - Adoption of ISO/IEC 26514:2008 Systems and Software Engineering--Requirements for Designers and Developers of User DocumentationThis standard provides requirements for the design and development of software user documentation as part of the life cycle processes. It defines... Active Standard
802.15.4-2011 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio... Active Standard
802.15.4e-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayerIEEE Std 802.15.4-2011 is amended by this standard. The intention of this amendment is to enhance and add functionality to the IEEE 802.15.4 MAC... Active Standard
802.15.4f-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY)This amendment provides two PHYs (MSK and LRP UWB) that can be used in a wide range of applications requiring various combinations of low cost,... Active Standard
802.15.4g-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility NetworksIn this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate... Active Standard
15026-1-2011 - IEEE Trial-Use Standard--Adoption of ISO/IEC TR 15026-1:2010 Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and VocabularyThis trial-use standard adopts ISO/IEC TR 15026-1:2010, which defines terms and establishes an extensive and organized set of concepts and their... Active Standard
24748-1-2011 - Guide--Adoption of ISO/IEC TR 24748-1:2010 Systems and Software Engineering--Life Cycle Management--Part 1: Guide for Life Cycle ManagementThis guide adopts ISO/IEC TR 24748-1:2010, which provides information on life cycle concepts and descriptions of the purposes and outcomes of... Active Standard
802.3-2012 - EthernetEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control ... Active Standard
26512-2011 - /ISO/IEC Systems and software engineering -- Requirements for acquirers and suppliers of user documentationISO/IEC/IEEE 26512:2011 was developed to assist users of ISO/IEC 15288:2008 (IEEE Std 15288-2008) or ISO/IEC 12207:2008 (IEEE Std 12207-2008) to... Active Standard
8802-2-1989 - Information Processing Systems -- Local Area Networks -- Part 2: Logic link controlThis standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open... Active Standard
1003.1-2008/Cor 1-2013 - —Portable Operating System Interface (POSIX(R)) Base Specifications, Issue 7 - Technical Corrigendum 1This Technical Corrigendum addresses problems discovered since the approval of IEEE Std 1003.1TM -2008. Active Standard
20000-1-2013 - Approved Draft Standard Adoption of ISO/IEC 20000-1, Information technology -- Service management -- Part 1: Service management system requirements Active Standard
15026-2-2011 - IEEE Standard--Adoption of ISO/IEC 15026-2:2011 Systems and Software Engineering--Systems and Software Assurance--Part 2: Assurance CaseISO/IEC 15026-2:2011 is adopted by this standard. ISO/IEC 15026-2:2011 specifies minimum requirements for the structure and contents of an... Active Standard
21451-7-2011 - Information technology--Smart transducer interface for sensors and actuators--Part 7: Transducers to radio frequency identification (RFID) systems communication protocols and transducer electronic data sheet (TEDS) formatsISO/IEC/IEEE 21451-7:2011 defines data formats to facilitate communications between radio frequency identification (RFID) systems and smart RFID... Active Standard
24774-2012 - Guide--Adoption of ISO/IEC TR 24474:2010 Systems and Software Engineering-- Life Cycle Management--Guidelines for Process DescriptionISO/IEC TR 24774:2010 is adopted by this standard. An increasing number of international, national and industry standards describe process models.... Active Standard
1490-2011 - Guide--Adoption of the Project Management Institute (PMI(R)) Standard A Guide to the Project Management Body of Knowledge (PMBOK(R) Guide)--Fourth EditionThe PMI standard, A Guide to the Project Management Body of Knowledge (PMBOK(R) Guide)--Fourth Edition, is adopted in this standard. Active Standard
15289-2011 - Systems and software engineering -- Content of life-cycle information products (documentation)ISO/IEC/IEEE 15289:2011 provides requirements for identifying and planning the specific information items (information products, documentation) to... Active Standard
29148-2011 - Systems and software engineering -- Life cycle processes --Requirements engineeringThis standard replaces IEEE 830-1998, IEEE 1233-1998, IEEE 1362-1998. ISO/IEC/IEEE 29148:2011 contains provisions for the processes and products... Active Standard
42010-2011 - Systems and software engineering -- Architecture descriptionISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions.... Active Standard
24748-2-2012 - Guide--Adoption of ISO/IEC TR 24748-2:2011 Systems and Software Engineering-- Life Cycle Management-- Part 2: Guide to the Application of ISO/IEC 15288 (System Life Cycle Processes)ISO/IEC TR 24748-2:2011 is adopted by this standard. ISO/IEC TR 24748-2:2011 is a guide for the application of ISO/IEC 15288:2008. It addresses... Active Standard
24748-3-2012 - Guide:--Adoption of ISO/IEC TR 24748-3:2011, Systems and software engineering-Life cycle management-Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)Adoption of ISO/IEC TR 24748-3:2011. ISO/IEC TR 24748-3:2011 is a guide for the application of ISO/IEC 12207:2008. It addresses system, life cycle... Active Standard
802.15.6-2012 - Part 15.6: Wireless Body Area NetworksShort-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It... Active Standard
828-2012 - Configuration Management in Systems and Software EngineeringThis standard establishes the minimum requirements for processes for Configuration Management (CM) in systems and software engineering. The... Active Standard
802-1955 - AIEE Proposed Trail Use Test Code DIRECT -- CURRENT CARBON -- PILE VOLTAGE REGULATORS for AIRCRAFTIt is the purpose of this code to define uniform acceptable methods of making tests to determine that the rating, performance and other... Active Standard
26515-2012 - Systems and software engineering -- Developing user documentation in an agile environmentISO/IEC/IEEE 26515:2012 specifies the way in which user documentation can be developed in agile development projects. It is intended for use in... Active Standard
31320-1-2012 - Information technology -- Modeling Languages -- Part 1: Syntax and Semantics for IDEF0IDEF0 function modeling is designed to represent the decisions, actions, and activities of an existing or prospective organization or system.... Active Standard
20000-2-2013 - Approved Draft Adoption of ISO/IEC 20000-2:2012, Information technology -- Service management -- Part 2: Guidance on the application of service management systemsISO/IEC 20000-2:2012 provides guidance on the application of service management systems (SMS) based on the requirements in ISO/IEC 20000-1. ISO... Active Standard
8802-11-2012 - Information technology--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
31320-2-2012 - Information technology — Modeling Languages—Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)The semantics and syntax of IDEF1X, a language used to represent a conceptual schema, are described. Two styles of IDEF1X model are described. 1.... Active Standard
135-1969 - Recommended Practice for Aircraft, Missile, and Space Equipment Electrical Insulation TestsIt is the purpose of this Recommended Practice to define acceptable methods of testing electrical insulation in flight electric equipment. Test... Withdrawn Standard
521-1984 - Standard Letter Designations for Radar-Frequency BandsSince World War II, radar systems engineers have used letter designations as a short notation for describing the frequency band of operation. This... Superseded Standard
521-2002 - Standard Letter Designations for Radar-Frequency BandsThe Standard Letter Designations for Radar-Frequency Bands was first issued in 1976 and was written to remove the confusion that developed from... Active Standard
610-1990 - Standard Computer Dictionary: Compilation of IEEE Standard Computer GlossariesWithdrawn Standard. Withdrawn Date: Apr 20, 2001. No longer endorsed by the IEEE. This dictionary is a compilation of IEEE standard glossaries... Withdrawn Standard
610.2-1987 - Standard Glossary of Computer Applications TerminologyThis glossary defines terms in the field of computer applications. Topics covered include automated language processing, automatic indexing,... Withdrawn Standard
610.3-1989 - Standard Glossary of Modeling and Simulation TerminologyThis glossary defines terms in the field of modeling and simulation. Topics covered include general modeling and simulation concepts, types of... Withdrawn Standard
610.4-1990 - Standard Glossary of Image Processing and Pattern Recognition TerminologyThis glossary identifies terms currently in use in the field of image processing and pattern recognition. Standard definitions for those terms are... Withdrawn Standard
610.5-1990 - Standard Glossary of Data Management TerminologyIdentifies terms in use in the field of data management. Standard definitions for those terms are established. Withdrawn Standard
610.6-1991 - Standard Glossary of Computer Graphics TerminologyTerms in the field of computer graphics are defined. Topics covered include general computer graphics concepts, computer graphics hardware and... Withdrawn Standard
610.7-1995 - Standard Glossary of Computer Networking TerminologyTerms that pertain to data communications and networking, from the following areas, are defined: data transmission, general communications,... Withdrawn Standard
610.10-1994 - Standard Glossary of Computer Hardware TerminologyTerms pertaining to computer hardware are defined. Terms falling under the categories of computer architecture, computer storage, general hardware... Withdrawn Standard
610.12-1990 - Standard Glossary of Software Engineering TerminologyDescribes the IEEE Std 610.12-1990, IEEE standard glossary of software engineering terminology, which identifies terms currently in use in the... Superseded Standard
610.12 (H)-1990 - Standard Glossary of Software Engineering Terminology (HyperCard Stack)This standard identifies terms currently in use in the field of Software Engineering. Standard definitions for those terms are established. Superseded Standard
610.13-1993 - Standard Glossary of Computer LanguagesThis glossary defines terms that pertain to computer languages. It includes types of computer languages, such as page description languages, and... Withdrawn Standard
729-1983 - Standard Glossary of Software Engineering Terminology Superseded Standard
730-1989 - Software Quality Assurance PlansSuperseded Uniform minimum acceptable requirements for the preparation and content of Software Quality Assurance Plans (SQAPs) are provided. The... Superseded Standard
730-1998 - Software Quality Assurance PlansUniform, minimum acceptable requirements for the preparation and content of software quality assurance plans (SQAPs) are provided. This standard... Superseded Standard
730-2002 - Software Quality Assurance PlansThe standard specifies the format and content of software quality assurance plans. It meets the IEEE/EIA 12207.1 requirements for such plans. Active Standard
730.1-1995 - Guide for Software Quality Assurance PlanningApproaches to good software quality assurance practices in support of IEEE Std 730-1989, IEEE Standard for software quality assurance plans, are... Withdrawn Standard
802-1990 - IEEE Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Active Standard
802.1j-1996 - Supplement to Information technology-Local area networks-Media access control (MAC) bridges: Managed objects for MAC bridgesManaged object classes and their components that permit remote management of ISO/ IEC 10038-conformant MAC bridges by means of suitable management... Superseded Standard
802.1t-2001 - Common specifications - Part 3: Media Access Control (MAC) Bridges - Amendment 1: Technical and Editorial CorrectionsThis amendment to IEEE Std 802.1D, 1998 edition is intended to document maintenance items identified in the text of IEEE Std 802.1D, 1998 edition ... Superseded Standard
802.1w-2001 - Common Specifications - Part 3: Media Access Control (MAC) Bridges: Amendment 2 - Rapid ReconfigurationThis amendment to IEEE Std 802.1D, 1998 Edition (ISO/IEC 15802-3: 1998) and IEEE Std 802.1t-2001 defines the changes necessary to the operation of... Superseded Standard
802.2-1989 - Specific Requirements - Part 2: Logical Link ControlThis standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open... Withdrawn Standard
802.3-1985 - Local Area Networks: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) - (ETHERNET)The carrier sense multiple access with collision detection (CSMA/CD) media access method is the means by which two or more stations share a common... Superseded Standard
802.3-2000 - Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-2002 - IT - LAN/MAN - Specific Requirements - Part 3: CSMA/CD Access Method and Physical Layer Specifications - Maintenance Revision #6The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-REVam-2005 - specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3-2005 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3av-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 1: Physical Layer Specifications and Management Parameters for 10 Gb/s Passive Optical NetworksThis amendment to IEEE Std 802.3-2008 extends Ethernet Passive Optical Networks (EPONs) operation to 10 Gb/s providing both symmetric, 10 Gb/s... Active Standard
802.3-2005/Cor 2-2007 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 2: Std 802.3an-2006 10GBASE-T CorrectionCorrigendum to IEEE Std 802.3-2005. This corrigendum will correct Equation 55-55. It has been incorporated into the second printing of IEEE Std... Superseded Standard
802.3-2008 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3az-2010 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 5: Media Access Control Parameters, Physical Layers, and Management Parameters for Energy-Efficient EthernetThis amendment to IEEE Std 802.3-2008 specifies changes to several existing physical layers to enable energy-efficient operation of Ethernet.... Active Standard
802.3ba-2010 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 4: Media Access Control Parameters, Physical Layers, and Management Parameters for 40 Gb/s and 100 Gb/s OperationThis amendment to IEEE Std 802.3-2008 includes changes to IEEE Std 802.3-2008 and adds Clause 80 through Clause 88, Annex 83A through Annex 83C,... Active Standard
802.3at-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 3: Data Terminal Equipment (DTE) Power via the Media Dependent Interface (MDI) EnhancementsA protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802 LANs are defined... Active Standard
802.3-2008/Cor 1-2009 - Specific requirements-- Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Corrigendum 1: Timing Considerations for PAUSE OperationThe correction to the PAUSE reaction timing delay for the 10GBASE-T port type is addressed in this corrigendum to IEEE Std 802.3-2008. Active Standard
802.3bc-2009 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 2: Ethernet Organizationally Specific Type, Length, Value (TLVs)This amendment to IEEE Std 802.3-2008 transfers the IEEE 802.3 Organizationally Specific TLVs, specified in IEEE Std 802.1AB(TM)-2009, Station and... Active Standard
802.3bd-2011 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications - Amendment 8: MAC Control Frame for Priority-based Flow ControlMAC Control Frame to support IEEE 802.1Q Priority-based Flow Control is defined in this amendment. Active Standard
802.3-2002 - Specific requirements-- Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-2005/Cor 1-2006 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 1This corrigendum clarifies and corrects isolation text including harmonization for both powered and unpowered Medium Dependent Interfaces Superseded Standard
802.3aa-1998 - Maintenance Revision #5 (100 BASE-T), Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Maintenance Revision #5 (100 BASE-T)The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3ab-1999 - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Physical Layer Parameters and Specifications for 1000 Mb/s Operation over 4 pair of Category 5 Balanced Copper Cabling, Type 1000BASE-TType 1000 BASE-T PCS, type 1000 BASE-T PMA sublayer, and type 1000 BASE-T medium dependent interface (MDI) are defined. This supplement provides... Superseded Standard
802.3ac-1998 - Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) frame extensions for Virtual Bridged Local Area Networks (VLAN) tagging on 802.3 networksChanges and additions to IEEE standard 802.3, 1998 edition, to support virtual bridged local area networks (VLANs) as specified in IEEE P802.1Q.... Superseded Standard
802.3ad-2000 - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications-Aggregation of Multiple Link SegmentsAn optional Link Aggregation sublayer for use with CSMA/CD MACs is defined. Link Ag-gregation allows one or more links to be aggregated together... Superseded Standard
802.3ae-2002 - Part 3: CSMA/CD Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s OperationSupport to extend the IEEE 802.3 protocol and MAC specification to an operating speed of 10 Gb/s. Several Physical Coding Sublayers known as... Superseded Standard
802.3af-2003 - E Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Data Terminal Equipment (DTE) Power Via Media Dependent Interface (MDI)Support for optionally powering a 10BASE-T,100BASE-TX or 1000BASE-T DTE device via the Power Interface (PI)using physical layers defined in... Superseded Standard
802.3ah-2004 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment: Media Access Control Parameters, Physical Layers, and Management Parameters for Subscriber Access NetworksThis amendment to IEEE Std 802.3-2002 as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003, IEEE Std 802.3aj-2003, and IEEE Std 802.3ak-2004... Superseded Standard
802.3aj-2003 - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Maintenance 7This amendment to IEEE Std 802.3-2002, as amended by IEEE Std 802.3ae-2002 10Gb/s Ethernet and IEEE Std 802.3af-2003 DTE Power via MDI, contains a... Superseded Standard
802.3ak-2004 - Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10GBASE-CX4This amendment to IEEE Std 802.3-2002, as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003 and IEEE Std 802.3aj-2003, specifies a new... Superseded Standard
802.3an-2006 - – LAN/MAN - Specific Requirements Part 3: CSMA/CD Access Method and Physical Layer Specifications - Amendment: Physical Layer and Management Parameters for 10 Gb/s Operation, Type 10GBASE-TThis amendment to IEEE Std 802.3-2005 specifies a new Physical Coding Sublayer interface and a new Physical Medium Attachment sublayer interface... Superseded Standard
802.3ap-2007 - Specific requirements-- Part 3: CSMA/CD Access Method and Physical Layer Specifications - Amendment: Ethernet Operation Over Electrical BackplanesThis amendment to IEEE Std 802.3-2005 includes the new Clause 69 through Clause 74. Clause 69 provides an overview of Ethernet operation over... Superseded Standard
802.3aq-2006 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThis amendment to IEEE Std 802.3-2005 specifies a new PMD, 10GBASE-LRM, for serial, 10 Gb/s operation over up to 220 m of 62.5 ¿m and 50 ¿m... Superseded Standard
802.3as-2006 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThis amendment to IEEE Std 802.3-2005 extends the IEEE 802.3 basic frame format with the addition of an envelope frame to accommodate additional... Superseded Standard
802.3z-1998 - Media Access Control Parameters, Physical Layers, Repeater and Management Parameters for 1,000 Mb/s Operation, Supplement to Information Technology - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Superseded Standard
802.5-1989 - Local Area Networks: Token Ring Access Method and Physical Layer SpecificationsThis revised ANSI/IEEE 802.5-1985 is part of a standards family for LANs. For the purpose of compatible interconnection of data processing... Superseded Standard
802.5-1997 - Specific Requirements - Part 5: Token Ring Access Method and Physical Layer Specifications Withdrawn Standard
802.5t-2000 - Part 5: Token Ring access method and physical layer specifications 100 Mbit/s Dedicated Token Ring OperationThis supplement specifies the changes required to ANSI/IEEE Std 802.5, 1998 Edition, (Base standard) and ANSI/IEEE Std 802.5r, 1998 Edition, and... Withdrawn Standard
802.5v-2001 - Part 5: Token Ring access method and physical layer specifications Gigabit Token Ring OperationThis amendment specifies the changes required to IEEE 802.5, 1999 Edition (ISO/IEC 8802-5:1998 base standard), IEEE Stds 802.5r and 802.5j, 1998... Withdrawn Standard
802.5w-2000 - Corrigenda to Part 5: Token Ring access method and physical layer specificationsThis corrigenda to local and metropolitan area network standards, ISO/IEC 8802-5:1998 and ISO/IEC 8802-5:1998/Amd. 1:1998, is part of a family of... Withdrawn Standard
802.11-1997 - Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, part of a... Superseded Standard
802.11-1999 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThis standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant... Superseded Standard
802.11u-2011 - Local and Metropolitan networks-specific requirements-Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 9: Interworking with External NetworksThis amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) that support wireless local area network (WLAN) interworking... Superseded Standard
802.11v-2011 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 8: 802.11 Wireless Network ManagementThis amendment provides Wireless Network Management enhancements to the IEEE 802.11 MAC, and PHY, extending radio measurements to effect a... Superseded Standard
802.11y-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: 3650-3700 MHz Operation in USAThis amendment defines enhancements to the IEEE 802.11 physical layer (PHY) and medium access control (MAC) to support operation in the 3650¿3700... Superseded Standard
802.11n-2009 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 5: Enhancements for Higher ThroughputThis amendment defines modifications to both the 802.11 physical layers (PHY) and the 802.11 Medium Access Control Layer (MAC) so that modes of... Superseded Standard
802.11p-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 6: Wireless Access in Vehicular EnvironmentsThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing wireless communications while in a... Superseded Standard
802.11z-2010 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 7: Extensions to Direct-Link Setup (DLS)This amendment provides direct-link setup enhancements to the IEEE 802.11 MAC and PHY, extending direct-link setup to be independent of the access... Superseded Standard
802.11s-2011 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 10: Mesh NetworkingThis amendment describes protocols for IEEE 802.11 stations to form self-configuring multi-hop networks that support both broadcast/multicast and... Superseded Standard
802.11aa-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: MAC Enhancements for Robust Audio Video StreamingAmendment to IEEE Std 802.11(TM)-2012.This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) for robust audio video ... Active Standard
802.11-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
802.11ad-2012 - Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz BandThis amendment defines modifications to both the IEEE 802.11 physical layers (PHYs) and the IEEE 802.11 medium access control layer (MAC) to... Active Standard
802.11-2007 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Superseded Standard
802.11b-1999 - Local and Metropolitan networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Higher Speed Physical Layer (PHY) Extension in the 2.4 GHz bandChanges and additions to IEEE Std 802.11, 1999 Edition are provided to support the higher rate physical layer (PHY) for operation in the 2.4 GHz band. Superseded Standard
802.11b/Cor 1-2001 - Corrigenda to IEEE 802.11b-1999, Information Technology - Local and Metropolitan Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Higher Speed Physical Layer (PHY) Extension in the 2.4 GHz BandThis IEEE Standards product is part of the 802 family on LAN/MAN. Abstract: Changes and additions are provided for IEEE Std 802.11b-1999 to... Superseded Standard
802.11c-1998 - Local area networks - Media access control (MAC) bridges - Supplement for support by 802.11 Superseded Standard
802.11d-2001 - Specific requirements-- Part 11: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Specification for operation in additional regulatory domainsThis amendment specifies the extensions to IEEE Std 802.11(R) for wireless local area networks providing specifications for conformant operation... Superseded Standard
802.11e-2005 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: Medium Access Method (MAC) Quality of Service EnhancementsThis amendment defines the medium access control (MAC) procedures to support local area network (LAN) applications with quality of service (QoS)... Superseded Standard
802.11g-2003 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Further Higher Data Rate Extension in the 2.4 GHz BandChanges and additions to IEEE Std 802.11, 1999 Edition, as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, and 802.11d... Superseded Standard
802.11h-2003 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Spectrum and Transmit Power Management Extensions in the 5 GHz Band in EuropeThis amendment specifies the extensions to IEEE 802.11TM for wireless local area networks (WLANs) providing mechanisms for dynamic frequency... Superseded Standard
802.11i-2004 - Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 6: Medium Access Control (MAC) Security EnhancementsSecurity mechanisms for IEEE 802.11 are defined in this amendment, which includes a definition of WEP for backward compatibility with the original... Superseded Standard
802.11j-2004 - Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications--Amendment 7:4.9 GHz-5 GHz Operation in JapanThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for operation in the 4.9... Superseded Standard
802.11k-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC)and Physical Layer (PHY) Specifications Amendment 1: Radio Resource Measurement of Wireless LANsThis amendment specifies the extensions to IEEE Std 802.11 for Wireless LANs providing mechanisms for Radio Resource Measurement. Superseded Standard
802.11r-2008 - Specific requirements-- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Fast Basic Service Set (BSS) TransitionThis amendment specifies the extensions to IEEE Std 802.11-2007 for wireless local area networks (WLANs) providing mechanisms for fast basic... Superseded Standard
802.11w-2009 - Specific requirements. Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Protected Management FramesThis amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for protecting management... Superseded Standard
802.12c-1998 - Supplement to Information Technology--Specific requirements--Part 12: Demad-priority access method, physical layer and repeater specifications: Full-Duplex OperationOptional MAC capabilities are defined to allow direct link connection between two end nodes with provision for both half-duplex and full-duplex... Withdrawn Standard
802.15.1-2002 - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)The lower transport layers [(Logical Link Control and Adaptation Protocol (L2CAP), Link Manager Protocol (LMP), baseband and radio] of the... Superseded Standard
802.15.1-2005 - Specific requirements-- Part 15.1a: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Wireless Personal Area Networks (WPAN)Methods for communicating devices in a personal area network (PAN) are covered in this standard. Active Standard
802.15.2-2003 - Recommended Practice for Information technology-- Specific requirements-- Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless Devices Operating in Unlicensed Frequency BandsThis recommended practice addresses the issue of coexistence of wireless local area networks and wireless personal area networks. These wireless... Active Standard
802.15.3-2003 - Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz radio transmissions in a Wireless Personal... Active Standard
802.15.3c-2009 - Specific requirements-- Part 15.3: Amendment 2: Millimeter-wave-based Alternative Physical Layer ExtensionThis amendment defines and alternative physical layer (PHY) for IEEE Std 802.15.3-2003. Three PHY modes have been defined that enable data rates... Active Standard
802.15.4-2003 - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN)This standard defines the protocol and compatible interconnection for data communication devices using low data rate, low power and low complexity... Superseded Standard
802.15.4-2006 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs)IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low... Superseded Standard
802.15.4d-2009 - Specific requirements-- Part 15.4: Amendment 3: Alternative Physical Layer Extensionto support the Japanese 950 MHz bandsThis amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency... Superseded Standard
802.15.4c-2009 - Specific requirements-- Part 15.4: Amendment 2: Alternative Physical Layer Extension to support one or more of the Chinese 314-316 MHz, 430-434 MHz, and 779-787 MHz bandsThis amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations,... Superseded Standard
802.15.4a-2007 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHYsThis standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity... Superseded Standard
802.15.5-2009 - Recommended Practice for Information technology-- Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs)This IEEE recommended practice defines the architectural framework that enables WPAN devices to promote interoperable, stable, and scaleable... Active Standard
802.17-2004 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer SpecificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Superseded Standard
802.17c-2010 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specifications Amendment 2: Protected inter-ring connectionA service provider's use of the architecture and protocols of IEEE 802.17 to support ring interconnection through dual station homing, providing... Superseded Standard
802.17a-2004 - Media Access Control (MAC) Bridges - Amendment 1: Bridging of Std 802.17This amendment to IEEE Std 802.1D-2004 defines support of the internal sublayer service by the IEEE 802.17 MAC. Superseded Standard
802.17b-2007 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amendment 1 - Spatially Aware SublayerThis amendment enables a service provider to use the architecture and protocols of IEEE Std 802.17™-2004 to offer improvements in bandwidth... Superseded Standard
802.22.1-2010 - Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast BandsThis standard defines the protocol and data formats for communication devices forming a beaconing network that are used to protect low-power,... Active Standard
802.22.2-2012 - Recommended Practice for Information Technology - Wireless Regional Area Networks (WRAN) - Specific requirements - Part 22.2: Installation and Deployment of IEEE 802.22 SystemsEngineering practices for the installation and deployment of IEEE 802.22 systems are discussed in this recommended practice. Active Standard
828-1983 - Software Configuration Management Plans Superseded Standard
828-1990 - Software Configuration Management PlansDescribes the IEEE Std 828-1990, IEEE standard for software configuration management plans, establishes the minimum required contents of a... Superseded Standard
828-1998 - Software Configuration Management PlansThe minimum required contents of a Software Configuration Management Plan (SCMP) are established, and the specific activities to be addressed and... Superseded Standard
828-2005 - Software Configuration Management PlansThe minimum required contents of a Software Configuration Management (SCM) Plan are established via this standard. This standard applies to the... Superseded Standard
829-1983 - Software Test DocumentationA set of basic test documents that are associated with the dynamic aspects of software testing (that is, the execution of procedures and code) is... Superseded Standard
829-1998 - Software Test DocumentationA set of basic software test documents is described. This standard specifies the form and content of individual test documents. It does not... Superseded Standard
829-2008 - Software and System Test DocumentationTest processes determine whether the development products of a given activity conform to the requirements of that activity and whether the system... Active Standard
830-1984 - Guide for Software Requirements SpecificationsDiscusses the background information for writing a good software requirements specification (SRS). The characteristics of a good SRS are that it... Superseded Standard
830-1993 - Recommended Practice for Software Requirements SpecificationsThe content and qualities of a good software requirements specification (SRS) are described and several sample SRS outlines are presented. This... Superseded Standard
830-1998 - Recommended Practice for Software Requirements SpecificationsThe content and qualities of a good software requirements specification (SRS) are described, and several sample SRS outlines are presented. This... Superseded Standard
982.1-1988 - Standard Dictionary of Measures to Produce Reliable SoftwareThe standard provides a set of measures indicative of software reliability that can be applied to the software product as well as to the... Superseded Standard
982.1-2005 - Standard Dictionary of Measures of the Software Aspects of DependabilityA standard dictionary of measures of the software aspects of dependability for assessing and predicting the reliability, maintainability, and... Active Standard
982.2-1988 - Guide for the Use of IEEE Standard Dictionary of Measures to Produce Reliable SoftwareThe guide provides the conceptual insights, implementation considerations, and assessment suggestions for the application of IEEE Std 982.1-1988,... Withdrawn Standard
983-1986 - Guide for Software Quality Assurance PlanningThe purpose of this guide is to explain and clarify the contents of each section of a Software Quality Assurance Plan (SQAP) that satisfies the... Withdrawn Standard
990-1987 - Recommended Practice for Ada As a Program Design LanguageThe report provides recommendations reflecting the state of the art and alternative approaches to good practice for characteristics of program... Withdrawn Standard
1002-1987 - Standard Taxonomy for Software Engineering StandardsDescribes the form and content of a software engineering standards taxonomy. Applicability is not restricted by software application, size,... Withdrawn Standard
1003.0-1995 - Guide to the POSIX(R) Open System Environment (OSE)This guide presents an overview of open system concepts and their applications. Information is provided to persons evaluating systems based on the... Withdrawn Standard
1003.1-1990 - Information Technology -- Portable Operating System Interface (POSIX(R)) -- Part 1: System Application Program Interface (API) [C Language]Abstract not available. See ISO/IEC 9945-1. Superseded Standard
1003.1-1988 - Standard Portable Operating System Interface for Computer EnvironmentsThe results of deliberations by the Technical Committee on Operating Systems and Application Environments of the IEEE Computer Society concerning... Superseded Standard
1003.1-2001 - Portable Operating System Interface (POSIX(R))This standard defines a standard operating system interface and environment, including a command interpreter (or "shell"), and common utility... Superseded Standard
1003.1-2008 - Portable Operating System Interface (POSIX(R))POSIX.1-2008 is simultaneously IEEE Std 1003.1 -2008 and The Open Group Technical Standard Base Specifications, Issue 7. POSIX. 1-2008 defines a... Active Standard
1003.1-2001/Cor 1-2002 - Std 1003.1-2001/Cor 1 2002 Portable Operating System Interface (POSIX(R)) -- Technical Corrigendum Number 1This technical corrigendum addresses issues raised in defect reports and interpretation requests submitted up to the date of approval of this PAR... Superseded Standard
1003.1-2001/Cor 2-2004 - Portable Operating System Interface (POSIX) - Technical Corrigendum Number 2Technical Corrigendum 2 addresses problems discovered since the approval of the 2003 edition of The Open Group Base Specifications, Issue 6, IEEE... Superseded Standard
1003.1b-1993 - Portable Operating System Interfaces (POSIX(R)) - Part 1: System Application Program Interface (API) - Amendment 1: Realtime Extension [C language]This amendment is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the applications... Superseded Standard
1003.1c-1995 - Portable Operating System Interface (POSIX(R)) - System Application Program Interface (API) Amendment 2: Threads Extension (C Language)Abstract not available. See ISO/IEC 9945-1. Superseded Standard
1003.1d-1999 - Portable Operating System Interface (POSIX(R))--Part 1: System Application Program Interface (API)--Amendment 4: Additional Realtime Extensions [C Language]This standard is part of the POSIX series of standards for applications and user inter-faces to open systems. It defines the applications... Superseded Standard
1003.1g-2000 - Portable Operating System Interface (POSIX(R))--Part 1: System Application Program Interface (API)--Amendment 6: Protocol Independent Interfaces (PII) Superseded Standard
1003.1i-1995 - Portable Operating System Interface (POSIX(R)) - Part 1: System Application Program Interface (API) - Amendment: Technical Corrigenda to Realtime Extension [C Language]Abstract not available. See ISO/IEC 9945-1. Superseded Standard
1003.1j-2000 - Portable Operating System Interface (POSIX(R))--Part 1: System Application Program Interface (API)--Amendment 5: Advanced Realtime Extensions [C Language]This standard is part of the POSIX series of standards for applications and user interfac-es to open systems. It defines the applications... Superseded Standard
1003.1q-2000 - Portable Operating Systems Interface (POSIX(R))--Part 1: System Application Program Interface (API)--Amendment 7: Tracing [C Language]This amendment is part of the POSIX series of standards for applications and user interfaces to open systems. The purpose of this project is to... Superseded Standard
1003.2-1992 - Portable Operating System Interfaces (POSIX(R))--Part 2: Shell and UtilitiesThe Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encountered by... Superseded Standard
1003.2a-1992 - Portable Operating System Interfaces (POSIX(R))--Part 2: Shell and Utilities, User Portability ExtensionAbstract not available. See ISO/IEC 9945-2. Superseded Standard
1003.2d-1994 - Portable Operating System Interface (POSIX(R))--Part 2: Shell and Utilities--Amendment 1: Batch EnvironmentThis amendment is part of the POSIX series of standards for applications and user interfaces to open systems. It is a supplement to IEEE Std 1003... Superseded Standard
1003.3-1991 - Test Methods for Measuring Conformance to POSIX(R)IEEE Std 1003.3-1991, IEEE Standard for Information Technology-Test Methods for Measuring Conformance to POSIX, defines the general requirements... Withdrawn Standard
1003.5-1992 - POSIX(R) Ada Language Interfaces--PART 1: Binding for System Application Program Interface (API)It defines the Ada language bindings as package specifications and accompanying textual descriptions to the application program interface (API).... Withdrawn Standard
1003.5-1998 - POSIX(R) Ada Language Interfaces--PART 1: Binding for System Application Program Interface (API) Superseded Standard
1003.5b-1996 - POSIX(R) Ada Language Interfaces--Part 1: Binding for System Application Program Interface (API)--Amendment 1: Realtime ExtensionsThis standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the Ada language bindings... Withdrawn Standard
1003.5c-1998 - POSIX Ada Language Interfaces - Part 1: Binding for System Application Program Interface (API)This standard is part of the POSIX ®series of standards or applications and user inter-faces to open systems.It defines the Ada language bindings... Withdrawn Standard
1003.9-1992 - InformationTechnology - POSIX(R) FORTRAN 77 Language Interfaces - Part 1: Binding for System Application Program Interface (API)The standard provides a standardized interface for accessing the system services of ISO/IEC 9945-1: 1990 (IEEE Std 1003.1-1990, also known as... Withdrawn Standard
1003.10-1995 - POSIX(R)-Based Supercomputing Application Environment ProfileThe standard discussed is related to the POSIX series of standards for applications and user interfaces to open systems. It specified the set of... Withdrawn Standard
1003.13-2003 - Standardized Application Environment Profile (AEP) - POSIX Realtime and Embedded Application SupportThis standard is part of the POSIX series of standardized profiles for open systems. It defines environment profiles for portable realtime and... Active Standard
1003.13-1999 - Standardized Application Environment Profile - POSIX(R) Realtime Application SupportThis standard is part of the POSIX series of standardized profiles for open systems. It defines environment profiles for portable realtime... Superseded Standard
1003.23-1998 - Guide for Developing User Open System Environment (OSE) ProfilesThis guide presents an overview of User Organization Open System Environment (OSE) Profiles and their application. It is intended to assist users,... Withdrawn Standard
1003.26-2003 - Portable Operating System Interface (POSIX) - Part 26: Device Control Application Program Interface (API) [C Language]This standard is part of the POSIX series of standards. It defines an application program interface for controlling device drivers. Although it is... Active Standard
1008-1987 - Software Unit TestingThe standard is presented. The primary objective is to specify a standard approach to software unit testing that can be used as a basis for sound... Active Standard
1012-1986 - Software Verification and Validation PlansThis standard provides uniform and minimum requirements for the format and content of Software Verification and Validation Plans (SVVPs).... Superseded Standard
1012-1998 - Software Verification and ValidationSoftware verification and validation (V&V) processes, which determine whether development products of a given activity conform to the... Superseded Standard
1012-2004 - Software Verification and ValidationSoftware verification and validation (V&V) processes determine whether the development products of a given activity conform to the... Superseded Standard
1012-2012 - System and Software Verification and ValidationVerification and validation (V&V) processes are used to determine whether the development products of a given activity conform to the... Active Standard
1012a-1998 - Software Verification and Validation - Content Map to 12207.1The relationship between the two sets of requirements on plans for verification and validation of software, found in IEEE Std 1012-1998 and IEEE... Superseded Standard
1016-1987 - Recommended Practice for Software Design DescriptionsThe necessary information content and recommended organization for a software design description are specified. A software design description is a... Superseded Standard
1016-1998 - Recommended Practice for Software Design DescriptionsThe necessary information content and recommendations for an organization for Software Design Descriptions (SDDs) are described. An SDD is a... Superseded Standard
1016-2009 - Systems Design--Software Design DescriptionsThe required information content and organization for software design descriptions (SDDs) are described. An SDD is a representation of a software... Active Standard
1016.1-1993 - Guide to Software Design DescriptionsThe application of design methods and design documentation recommended in IEEE Std 1016-1987 is described. Several common design methods are used... Withdrawn Standard
1028-1988 - Standard Software Reviews and AuditsThe standard provides definitions and uniform requirements for review and audit processes. It does not establish the need to conduct specific... Superseded Standard
1028-1998 - Software ReviewsThis standard is concerned only with the reviews; it does not define procedures for determining the necessity of a review, nor does it specify the... Superseded Standard
1028-2008 - Software Reviews and AuditsFive types of software reviews and audits, together with procedures required for the execution of each type, are defined in this standard. This... Active Standard
1042-1987 - Guide to Software Configuration ManagementThe guide provides guidance in planning software configuration management (SCM) practices that are compatible with ANSI/IEEE Std 828-1983, IEEE... Withdrawn Standard
1044-1993 - Standard Classification for Software AnomaliesA uniform approach to the classification of anomalies found in software and its documentation is provided. The processing of anomalies discovered... Superseded Standard
1044-2009 - Standard Classification for Software AnomaliesThis standard provides a uniform approach to the classification of software anomalies, regardless of when they originate or when they are... Active Standard
1044.1-1995 - Guide to Classification for Software AnomaliesProvides supporting information to assist users who are applying IEEE Std 1044-1993, IEEE Standard Classification for Software Anomalies, to... Withdrawn Standard
1045-1992 - Software Productivity MetricsA consistent way to measure the elements that go into computing software productivity is defined. Software productivity metrics terminology are... Withdrawn Standard
1058-1998 - Software Project Management PlansThe format and contents of software project management plans, applicable to any type or size of software project, are described. The elements that... Superseded Standard
1058.1-1987 - Software Project Management PlansThis standard specifies the format and contents of software project management plans. It does not specify the exact techniques to be used in... Superseded Standard
1058a-1998 - Supplement to Software Project Management Plans Superseded Standard
1059-1993 - Guide for Software Verification and Validation PlansGuidance in preparing Software Verification and Validation Plans (SVVPs) that comply with IEEE Std 1012-1986 are provided. IEEE Std 1012-1986... Withdrawn Standard
1061-1992 - a Software Quality Metrics MethodologyA methodology for establishing quality requirements and identifying, implementing, analyzing, and validating the process and product of software... Superseded Standard
1061-1998 - a Software Quality Metrics MethodologyA methodology for establishing quality requirements and identifying, implementing, analyzing and validating the process and product software... Active Standard
1062-1993 - Recommended Practice for Software AcquisitionA set of useful quality practices that can be selected and applied during one or more steps in a software acquisition process is described. This... Active Standard
1062-1998 - Recommended Practice for Software AcquisitionA set of useful quality practices that can be selected and applied during one or more steps in a software acquisition process is described. This... Superseded Standard
1062a-1998 - Recommended Practice for Software Acquisition Active Standard
1063-1987 - Software User DocumentationTwo factors motivated the development of this standard: the concern of the software user communities over the poor quality of much user... Superseded Standard
1063-2001 - Software User DocumentationMinimum requirements for the structure, information content, and format of user documentation, including both printed and electronic documents... Superseded Standard
1074-1991 - Developing Software Life Cycle ProcessesThe set of activities that constitute the processes that are mandatory for the development and maintenance of software, whether stand-alone or... Superseded Standard
1074-1995 - Developing Software Life Cycle ProcessesThe set of Activities that constitute the Processes that are mandatory for the development and maintenance of software, whether stand-alone or... Superseded Standard
1074-1997 - Developing Software Life Cycle ProcessesA process for creating a software life cycle process is provided. Although this standard is directed primarily at the process architect, it is... Superseded Standard
1074-2006 - Developing a Software Project Life Cycle ProcessThis standard provides a process for creating a software project life cycle process (SPLCP). It is primarily directed at the process architect for... Active Standard
1074.1-1995 - Guide for Developing Software Life Cycle ProcessesSelected topics covered in IEEE Std 1074-1995, IEEE Standard for Developing Software Life Cycle Processes, are addressed in this guide. The guide... Withdrawn Standard
1084-1986 - Standard Glossary of Mathematics of Computing TerminologyThis dictionary defines terms in the field of Mathematics of Computing. Topics covered include Boolean algebra, number systems, computer... Withdrawn Standard
1175-1991 - Standard Reference Model for Computing System Tool InterconnectionsWithdrawn Standard. Withdrawn Date: Jan 10, 2002. No longer endorsed by the IEEE. This IEEE Standards product is part of the family on Software... Withdrawn Standard
1175.1-2002 - Guide for CASE Tool Interconnections - Classification and DescriptionThis guide describes the scope of application and interrelationships for the members of the IEEE 1175 family of standards. It points the reader to... Active Standard
1175.2-2006 - Recommended Practice for CASE Tool Interconnection - Characterization of InterconnectionsThis recommended practice describes interconnections that need to be understood and evaluated when buying, building, testing, or using computer... Active Standard
1175.3-2004 - CASE Tool Interconnections - Reference Model for Specifying Software BehaviorThe purpose of this standard is to specify a common set of modeling concepts based on those found in commercial CASE tools for describing the... Active Standard
1175.4-2008 - CASE Tool Interconnections--Reference Model for Specifying System BehaviorA reference model that provides a common interpretation basis by which tools can express and communicate the observable features of system... Active Standard
1209-1992 - Recommended Practice for the Evaluation and Selection of CASE ToolsThe evaluation and selection of CASE tools supporting software engineering processes, including project management processes, predevelopment... Withdrawn Standard
1219-1992 - Software MaintenanceThe process for managing and executing software maintenance activities is described. Superseded Standard
1219-1998 - Software MaintenanceThe process for managing and executing software maintenance activities is described. Superseded Standard
1220-1994 - Trial Use Application and Management of the Systems Engineering ProcessThe interdisciplinary tasks that are required throughout a system's life cycle to transform customer needs, requirements, and constraints into a... Superseded Standard
1220-1998 - Application and Management of the Systems Engineering ProcessThe interdisciplinary tasks, which are required throughout a system's life cycle to transform customer needs, requirements, and constraints into a... Superseded Standard
1220-2005 - Application and Management of the Systems Engineering ProcessThe interdisciplinary tasks, which are required throughout a system's life cycle to transform customer needs, requirements, and constraints into a... Active Standard
1224-1993 - Open Systems Interconnection (OSI) Abstract Data Manipulation--Application Program Interfaces (API) [Language Independent]A general-purpose application program interface (API) for the creation, examination, modification, and deletion of potentially complex Open... Withdrawn Standard
1224.1-1993 - X.400-Based Electronic Messaging--Application Program Interface (API) [Language Independent]Application program interfaces (APIs) to X.400-based electronic messaging services are defined in terms that are independent of any particular... Withdrawn Standard
1224.2-1993 - Directory Services--Application Programming Interface (API) [Language Independent]A application program interface (API) to OSI directory services is defined in terms that are independent of any particular programming language.... Withdrawn Standard
1228-1994 - Software Safety PlansThe minimum acceptable requirements for the content of a software safety plan are established. This standard applies to the software safety plan... Active Standard
1233-1996 - Guide for Developing System Requirements SpecificationsGuidance for the development of the set of requirements, the System Requirements Specification (SyRS), that will satisfy an expressed need is... Superseded Standard
1233-1996/Cor a-1998 - Guide for Developing System Requirements Specifications Superseded Standard
1238.1-1994 - , OSI Application Program Interfaces--File Transfer, Access, and Management [C Language]A C language application program interface (API) to the OSI file transfer, access and management (FTAM) protocol is defined. The functions of the... Withdrawn Standard
1278-1993 - Protocols for Distributed Interactive Simulation Applications--Entity Information and InteractionData messages, called protocol data units (PDUs), that are exchanged between simulation applications are defined. These PDUs provide information... Superseded Standard
1284-1994 - Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal ComputersA signaling method for asynchronous, fully interlocked, bidirectional parallel communications between hosts and printers or other peripherals is... Superseded Standard
1284-2000 - Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal ComputersA signaling method for asynchronous, fully interlocked, bidirectional parallel communi-cations between hosts and printers or other peripherals is... Active Standard
1284.1-1997 - Transport Independent Printer/System Interface (TIP/SI)A protocol and methodology for software developers, computer vendors and printer manufacturers to facilitate the orderly exchange of information... Active Standard
1295-1993 - X Window System--Modular Toolkit Environment (MTE)This IEEE Standards product is part of the family on Software Engineering. Graphical user interface (GUI) applications and user interfaces to open... Withdrawn Standard
1298-1992 - Standard Software Quality Management System Part 1: RequirementsRequirements for a software developer's quality management system are established. Each of the elements of a quality management system to be... Withdrawn Standard
1320.1-1998 - Functional Modeling Language - Syntax and Semantics for IDEF0IDEF0 function modeling is designed to represent the decisions, actions and activities of an existing or prospective organization or system. IDEF0... Active Standard
1320.2-1998 - Conceptual Modeling Language - Syntax and Semantics for IDEF1X97 (IDEFobject)IDEF1X/sub 97/ consists of two conceptual modeling languages. The key-style language supports data/information modeling and is downward compatible... Active Standard
1326-1993 - Test Methods for Measuring Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation - Application Program Interface (API) [Language Independent]Test methods for measuring conformance to IEEE Std 1224-1993, which defines a general purpose OSI Abstract Data Manipulation (OM) Application... Withdrawn Standard
1326.1-1993 - Test Methods for Measuring Conformance to X.400 Based Electronic Messaging Application Program Interfaces (API) [Language Independent]The test methods that may be used to test conformance to IEEE Std 1224.1-1993, IEEE Standard for Information Technology Open Systems... Withdrawn Standard
1326.2-1993 - Test Methods for Measuring Conformance to Directory Services--Application Program Interface (API) [Language Independent]Test methods for IEEE Std 1224.2-1993 language-independent specification of the applications interface to directory services are defined. Withdrawn Standard
1327-1993 - Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interfaces (API)A C programming language binding for the general-purpose OSI Abstract Data Manipulation (OM)Application Program Interface (API) in IEEE Std 1224... Withdrawn Standard
1327.1-1993 - X.400 Based Electronic Messaging C Language Interfaces--Binding for Application Program Interfaces (API)A C language binding to IEEE Std 1224.1-1993, IEEE Standard for Information Technology—X.400-Based Electronic Messaging—Application Program... Withdrawn Standard
1327.2-1993 - Directory Services C Language Interfaces--Binding for Application Program Interface (API)A C programming language binding for the Application Program Interface (API) to directory services in IEEE Std 1224.2-1993 is defined.This... Withdrawn Standard
1328-1993 - Test Methods for Measuring Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces--Binding for Application Program Interface (API)Test methods that may be used to test conformance to IEEE Std 1327-1993, IEEE Standard for Information Technology" Open Systems Interconnection ... Withdrawn Standard
1328.1-1993 - Test Methods for Measuring Conformance to X.400 Based Electronic Messaging C Language Interfaces--Binding for Application Program Interfaces (API)This standard defines test methods that may be used to test conformance to IEEE Std 1327.11993, which is a C language binding for IEEE Std 1224.1... Withdrawn Standard
1328.2-1993 - Test Methods for Measuring Conformance to Directory Services C Language Interfaces--Binding for Application Program Interface (API)Test methods for the C language binding defined in IEEE Std 1327.2-1993 for the applications interface to directory services defined in IEEE Std... Withdrawn Standard
1348-1995 - Recommended Practice for the Adoption of Computer-Aided Software Engineering (CASE) ToolsDifficulties that may be encountered, and how they can be avoided, by organizations intending to adopt CASE tools are addressed. An overview of... Withdrawn Standard
1351-1994 - ACSE and Presentation Layer Services--Application Program Interface (API) [C Language Independent]A language-dependent application program interface (API) to the ACSE application service element of the OSI application layer and the connection... Withdrawn Standard
1353-1994 - ASCE and Presentation Layer Services--Application Program Interface (API) [C Language Binding]A C language binding to IEEE Std 1351-1994, a language-independent standard defining an application program interface (API) to the ACSE... Withdrawn Standard
1362-1998 - Guide for Information Technology - System Definition - Concept of Operations (ConOps) DocumentThe format and contents of a concept of operations (ConOps) document are described. A ConOps is a user-oriented document that describes system... Superseded Standard
1362a-1998 - Guide for Information Technology - System Definition - Concept of Operations Document: Content Map for IEEE 12207.1 Superseded Standard
1364-1995 - Standard Hardware Description Language Based on the Verilog(R) Hardware Description LanguageThe Verilog Hardware Description Language (HDL) is defined. Verilog HDL is a formal notation intended for use in all phases of the creation of... Superseded Standard
1364-2001 - Standard Verilog Hardware Description LanguageThe Verilog Hardware Description Language (HDL)is defined in this standard. Verilog HDL is a formal notation intended for use in all phases of the... Superseded Standard
1364-2005 - Verilog Hardware Description LanguageThe Verilog hardware description language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all phases of... Superseded Standard
1387.2-1995 - Portable Operating System Interface (POSIX(R)) System Administration - Part 2: Software AdministrationThis standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines a software packaging... Withdrawn Standard
1387.3-1996 - (POSIX(R)) System Administration - Part 3: User and Group Account AdministrationIEEE Std 1387.3-1996 (System Administration Interface/User and Group Administration for Computer Operating System Environments) is part of the... Withdrawn Standard
1420.1-1995 - Software Reuse - Data Model for Reuse Library Interoperability: Basic Interoperability Data Model (BIDM)The minimal set of information about assets that reuse libraries should be able to exchange to support interoperability is provided. Withdrawn Standard
1420.1a-1996 - Supplement to Software Reuse-Data Model for Reuse Library Interoperability: Asset Certification Framework [Developed in cooperation with the Reuse Library Interoperability Group (RIG)]A consistent structure for describing a reuse library's asset certification policy in terms of an Asset Certification Framework is defined, along... Withdrawn Standard
1420.1b-1999 - Software Reuse - Data model for Reuse Library Interoperability: Intellectual Property Rights FrameworkA description is given of the "IEEE Trial-Use Supplement to the IEEE Standard for Information Technology-Software Reuse-Data Model for Reuse... Withdrawn Standard
1430-1996 - Guide for Information Technology Software Reuse-Concept of Operations for Interoperating Reuse Libraries [Developed in cooperation with the Reuse Library Interoperability Group (RIG)]This document describes the concepts necessary and appropriate for networks of interoperating reuse libraries (NIRLs). The purpose is to provide a... Withdrawn Standard
1448a-1996 - Software Life Cycle Processes Superseded Standard
1462-1998 - 1462-1998 IEEE Adoption of ISO/IEC 14102:1995 Information Technology - Guideline for the Evaluation and Selection of CASE ToolsIEEE Std 1462-1998 is an adoption of international standard ISO/IEC 14102:1995. The international standard deals with the evaluation and selection... Active Standard
1465-1998 - Standard - Adoption of International Standard ISO/IEC 12119:1994(E) - Information Technology - Software Packages - Quality Requirements and TestingQuality requirements for software packages and instructions on how to test a software package against these requirements are established. The... Withdrawn Standard
1471-2000 - Recommended Practice for Architectural Description for Software-Intensive SystemsThis recommended practice addresses the activities of the creation, analysis, and sustainment of architectures of software-intensive systems, and... Superseded Standard
1484.1-2003 - Learning Technology - Learning Technology Systems Architecture (LTSA)A high-level architecture for information technology-supported learning, education, and training systems that describes the high-level system... Withdrawn Standard
1484.4-2007 - Trial Use Recommended Practice for Digital Rights Expression Languages (DRELs) Suitable for eLearning TechnologiesThis recommended practice facilitates the creation, management and delivery of digital content for eLearning by technology that implements Digital... Active Standard
1490-2003 - Guide Adoption of PMI Standard - A Guide to the Project Management Body of KnowledgeThe subset of the Project Management Body of Knowledge that is generally accepted is identified and described in this guide. Generally accepted... Withdrawn Standard
1490-1998 - Guide - Adoption of PMI Standard, A Guide to the Project Management Body of KnowledgeThe subset of the Project Management Body of Knowledge that is generally accepted is identified and described in this IEEE guide on the adoption... Superseded Standard
1498-1995 - EIA/IEEE Interim Software Life Cycle Processes - Software Development: Acquirer-Supplier Agreement (Issued for Trial Use)This standard defines a set of software development activities and resulting software products. It provides a framework for software development... Superseded Standard
1517-1999 - Software Life Cycle Processes - Reuse ProcessesA common framework for extending the software life cycle processes of IEEE/EIA Std 12207.0-1996 to include the systematic practice of software... Superseded Standard
1517-2010 - System and Software Life Cycle Processes--Reuse ProcessesA common framework for extending the system and software life cycle processes of IEEE Std 12207(TM)-2008 to include the systematic practice of... Active Standard
1540-2001 - Software Life Cycle Processes - Risk ManagementA process for the management of risk in the life cycle of software is defined. It can be added to the existing set of software life cycle... Superseded Standard
1633-2008 - Recommended Practice on Software ReliabilityThe methods for assessing and predicting the reliability of software, based on a life-cycle approach to software reliability engineering, are... Active Standard
2000.1-1998 - : Year 2000 Terminology Superseded Standard
2000.1-1999 - : Year 2000 TerminologyThis standard revises IEEE Std 2000.1-1998. It provides a detailed set of definitions. In addition, it addresses calendar information that is... Withdrawn Standard
2000.1-1999 - ISO/IEC 16509: 1999 (IEEE Std 2000.1-1998) Year 2000 TerminologyThis standard revises IEEE Std 2000.1-1998. It provides a detailed set of definitions. In addition, it addresses calendar information that is... Withdrawn Standard
2000.2-1999 - Recommended Practice for Information Technology - Year 2000 Test MethodsThis document provides users of computer hardware, firmware, software, or data systems with recommended practices for assessing and demonstrating... Withdrawn Standard
2001-1999 - Recommended Practice for Internet Practices - Web Page Engineering - Intranet/Extranet ApplicationsThis standard defines recommended practices for Web page engineering. It addresses the needs of Webmasters and managers to effectively develop and... Superseded Standard
2001-2002 - Recommended Practice for the Internet - Web Site Engineering, Web Site Management and Web Site Life CycleRecommended practices for World Wide Web page engineering for Intranet and Extranet environments, based on World Wide Web Consortium (W3C) and... Active Standard
2003-1997 - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX StandardsThis standard defines the requirements and guidelines for test method specifications and test method implementations for measuring conformance to... Withdrawn Standard
2003.1-1992 - Test Methods for Measuring Conformance to POSIX(R)--Part1: System InterfacesIEEE Std 2003.1-1992 provides a definition of the requirements placed upon providers of POSIX test methods for POSIX.1 (IEEE Std 10031-1990; ISO... Withdrawn Standard
2003.1b-2000 - Test Methods Specifications for Measuring Conformance to POSIX(R) - Part 1: System Application Program Interface (API) -Amendment 1: Realtime Extension [C Language]This standard defines the test method specifications for IEEE Std 1003.1b-1993 [based on the document corresponding to the merger of IEEE Std 1003... Withdrawn Standard
2003.2-1996 - Test Methods for Measuring Conformance to POSIX(R) - Part II: Shell and UtilitiesA definition of the requirements placed upon providers of a POSIX . Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, IEEE... Withdrawn Standard
2030-2011 - Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and LoadsIEEE Std 2030 provides alternative approaches and best practices for achieving smart grid interoperability. It is the first all-encompassing IEEE... Active Standard
2600-2008 - : Hardcopy Device and System SecurityThis standard defines security requirements (all aspects of security including but not limited to authentication, authorization, privacy,... Active Standard
2600.1-2009 - a Protection Profile in Operational Environment AThis standard is for a protection profile for hardcopy devices in a restrictive commercial information processing environment in which a... Active Standard
8802-2-1994 - ISO/IEC 8802-2:1994: Information Technology - Specific requirements - Part 2: Logical link controlThis standard is part of a family of standards for local area networks (LANs) and metropolitan area networks (MANs) that deals with the physical... Superseded Standard
8802-2,Amd.3-1995 - Information technology -- Specific requirements -- Part 2: Logical link control Amendment 3: Conformance requirementsConformance requirements for ISO/IEC 8802-2: 1994 [ANSI/IEEE Std 802.2, 1994] are provided. Superseded Standard
8802-3-1989 - Information Processing Systems - Local Area Networks - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications Superseded Standard
8802-3-1990 - Information Processing System - Local Area Network - Part 3 : Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Superseded Standard
8802-3-2000 - ISO/IEC 8802-3:2000 (IEEE Std 802.3, 2000 Edition) Information Technology--Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsThe media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Active Standard
8802-5-1992 - ISO/IEC 8802-5:1992: Information technology- Part 5: Token ring access method and physical layer specifications Superseded Standard
8802.5-1995 - ISO/IEC 8802-5:1995 : Information Technology Processing Systems - Specifc requirements, Part 5:Token ring access method and physical Layer SpecificationThis Local and Metropolitan Area Network standard, ISO/IEC 8802-5: 1995, is part of a family of local area network (LAN) standards dealing with... Active Standard
8802-11-2005 - ISO/IEC 8802-11: 1999 [IEEE Std 802.11-1999(R2003)] Information technology--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, which is part... Superseded Standard
8802-11:2005/AMD4-2006 - ISO/IEC 8802-11:2005/AMD4 [IEEE Std 802.11g-2003] Information technology-- Part 11: Wireless LAN Medium Access Control (Mac) and Physical Layer (PHY) Specifications--Amendment 4: Further Higher Data Rate Extension in the 2.4 GHz BandChanges and additions to IEEE Std 802.11, 1999 Edition, as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, and 802.11d... Active Standard
8802-11:2005/AMD5-2006 - ISO/IEC 8802-11:1999/AMD5 (E) [IEEE Std 802.11h-2003] Information technology-- Part 11: Amendment 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in EuropeThis amendment specifies the extensions to IEEE 802.11(TM) for wireless local area networks (WLANs) providing mechanisms for dynamic frequency... Active Standard
8802-11/Amd 1-2000 - ISO/IEC 8802-11:1999/Amd 1: 2000 (E), Information Technology--Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications--Amendment 1: High-Speed Physical Layer in the 5 GHz BandThis IEEE Standards product is part of the 802 family on LAN/MAN. Changes and additions to IEEE 802.11a-1999 (ISO/IEC 8802-11:1999(E)) are... Superseded Standard
8802-11:2005/AMD6-2006 - ISO/IEC 8802-11:2005/AMD6, Information technology - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications - Amendment 6: Medium Access Control(MAC) Security EnhancementsSecurity mechanisms for IEEE 802.11 are defined in this amendment, which includes a definition of WEP for backward compatibility with the original... Active Standard
9945-2009 - Information technology Portable Operating System Interface (POSIX) Base Specifications, Issue 7Revision and Adoption of IEEE Std 1003.1-2008, this standard defines a standard operating system interface and environment, including a command... Active Standard
9945-1-1990 - ISO/IEC 9945-1:1990: Information technology - Portable Operating System Interface (POSIX(R)) - Part 1: System Application Program Interface (API) [C Language] Superseded Standard
9945-1-2003 - ISO/IEC 9945-1:2003 (E) Information Technology -- Portable Operating System Interface (POSIX(R)) -- Part 1 Base Definitions Active Standard
9945-2-2003 - ISO/IEC 9945-2:2003 (E) Information Technology--Portable Operating System Interface (POSIX(R)) -- Part 2: System Interfaces Active Standard
9945-3-2003 - ISO/IEC 9945-3:2003(E) Information Technology--Portable Operating System Interface (POSIX(R)) -- Part 3: Shell and Utilities Active Standard
9945-4-2003 - ISO/IEC 9945-4:2003 (E) Information Technology--Portable Operating System Interface (POSIX(R)) -- Part 4: Rationale Active Standard
12207-1996 - ISO/IEC 12207, International Standard - Information Technology - Software Life Cycle ProcessesThis IEThe 12207 Set contains: IEEE/EIA 12207.0-1996 - Abstract: ISO/IEC 12207 provides a common framework for developing and managing software.... Superseded Standard
12207.0-1996 - Software Life Cycle ProcessesISO/IEC 12207 provides a common framework for developing and managing software. IEEE/EIA 12207.0 consists of the clarifications, additions, and... Superseded Standard
12207-2008 - Systems and software engineering -- Software life cycle processesThis International Standard establishes a common framework for software life cycle processes, with well-defined terminology, that can be... Active Standard
12207.1-1997 - Guide for Information Technology - Software Life Cycle Processes - Life Cycle DataISO/IEC 12207 provides a common framework for developing and managing software. IEEE/EIA 12207.0 consists of the clarifications, additions, and... Superseded Standard
12207.2-1997 - Guide for Information Technology - Software Life Cycle Processes - Implementation ConsiderationsISO/IEC 12207 provides a common framework for developing and managing software. IEEE/EIA 12207.0 consists of the clarifications, additions, and... Superseded Standard
13961-2000 - ISO/IEC 13961:2000 (IEEE Std 1596-1992) Information Technology -- Scalable Coherent Interface (SCI) Active Standard
14143.1-2000 - Adoption of ISO/IEC 14143-1:1998 Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of ConceptsImplementation notes that relate to the IEEE interpretation of the ISO/IEC 14143-1:1998 standard are described. Withdrawn Standard
14515-1:2000 /Amd.1-2003 - ISO/IEC 14515-1:2000 /Amd.1: 2003, Information Technology -- Portable Operating System Interface (POSIX(R)) -- Test methods for measuring conformance to POSIX -- Part 1: System interfaces -- Amendment 1: Realtime extension (C Language)A definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, IEEE/ANSI... Active Standard
14575-2000 - ISO/IEC 14575:2000 (IEEE Std 1355-1995) Information Technology -- Microprocessor systems -- Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)The scalable coherent interface (SCI) provides computer-bus-like services but, instead of a bus, uses a collection of fast point-to-point... Active Standard
14764-2006 - ISO/IEC 14764:2006, Software Engineering - Software Life Cycle Processes - MaintenanceThe process for managing and executing software maintenance activities is described. Active Standard
15287-2-2000 - ISO/IEC 15287-2:2000 (IEEE Std 1003.13, 1998 Edition) Information technology--Standardized Application Environment Profile--Part 2: Posix(R) Realtime Application Support (AEP)This standard is part of the POSIX® series of standardized profiles for open systems. It defines environment profiles for portable realtime... Active Standard
15288-2004 - Systems engineering -- System life cycle processesThis standard establishes a common framework for describing the life cycle of systems created by humans. It defines a set of processes and... Superseded Standard
15288-2008 - Systems and software engineering System life cycle processesThis International Standard establishes a common process framework for describing the life cycle of man-made systems. It defines a set of... Active Standard
15802-5-1998 - ISO/IEC 15802-5:1998(E), Information Technology -- Common specifications -- Part 5: Remote Media Access Control (MAC) bridging (ANSI/IEEE std 802.1G, 1998 Edition)Extensions to the behavior of ISO/IEC 10038 (IEEE 802.1D) media access control (MAC) bridges, including the aspects of operation of remote MAC... Withdrawn Standard
15939-2008 - IEEE Standard Adoption of ISO/IEC 15939:2007--Systems and Software Engineering--Measurement ProcessA measurement process applicable to system and software engineering and management disciplines is defined by this International Standard. The... Active Standard
16085-2006 - ISO/IEC 16085:2006, Software Engineering - Software Life Cycle Processes - Risk ManagementA process for the management of risk in the life cycle is defined. It can be added to the existing set of software life cycle processes defined by... Active Standard
90003-2008 - Guide--Adoption of ISO/IEC 90003:2004 Software Engineering--Guidelines for the Application of ISO 9001:2000 to Computer SoftwareThis standard provides guidance to users of IEEE standards as to how to meet the quality management expectations of ISO 9001:2000 clauses and... Active Standard
C63.022-1996 - American National Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology EquipmentEmission limits are provided that are an are acceptable alternative for limits of the current issue of FCC Part 15, Subpart B, for Information... Active Standard
23026-2006 - ISO/IEC 23026:2006, Software Engineering---Recommended Practice for the Internet---Web Site Engineering, Web Site Management, and Web Site Life Cycle Recommended practices for World Wide Web page engineering for Intranet and Extranet environments, based on World Wide Web Consortium (W3C®) and... Active Standard
42010-2007 - ISO/IEC 42010:2007, Systems and Software Engineering---Recommended practice for architectural description of software-intensive systemsThis recommended practice addresses the activities of the creation, analysis, and sustainment of architectures of software-intensive systems, and... Superseded Standard
J-STD-016-1995 - Software Life Cycle Processes--Software Development--Acquirer-Supplier Agreement (Issued for Trial Use)Withdrawn Standard. This standard defines a set of software development activities and resulting software products. It provides a framework for... Withdrawn Standard
N42.44-2008 - American National the Performance of Checkpoint Cabinet X-Ray Imaging Security SystemsThis document establishes standards for the technical performance of cabinet X-ray imaging systems used for screening at security checkpoints and... Active Standard