Project Icon

Smart Grid Standards

Displaying results 1 - 40 of 160
1 2 3 4
Smart Grid Standards
Status Help
80-1961 - AIEE Guide for Safety in Alternating-Current Substation GroundingThe purpose of this Guide is: 1. To review grounding practices with especial reference to safety. 2. To establish, as a basis for design ... withdrawn Standard
80-2013 - IEEE Guide for Safety in AC Substation GroundingThis guide is primarily concerned with outdoor ac substations, either conventional or gas-insulated. These include distribution, transmi ... active Standard
81-2012 - IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding SystemPractical test methods and techniques are presented for measuring the electrical characteristics of grounding systems. Topics addressed ... active Standard
81.2-1991 - IEEE Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding SystemsPractical instrumentation methods are presented for measuring the ac characteristics of large, extended or interconnected grounding syst ... withdrawn Standard
367-2012 - IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well ... active Standard
421.2-2014 - IEEE Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control SystemsThis guide includes criteria, definitions, and test procedures for evaluating the dynamic performance of excitation control systems for ... active Standard
487-2015 - IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General ConsiderationsGeneral considerations are presented for the electrical protection of telecommunications facilities serving electric supply locations. T ... active Standard
487.1-2014 - IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation EquipmentWorkable methods for protecting wire-line telecommunication circuits entering electric supply locations are presented. The electric supp ... active Standard
487.3-2014 - IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid FacilitiesSafe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the us ... active Standard
644-1994 - IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power LinesUniform procedures for the measurement of power frequency electric and magnetic fields from alternating current 9ac) overhead power line ... active Standard
656-1992 - IEEE Standard for the Measurement of Audible Noise from Overhead Transmission LinesUniform procedures are established for manual and automatic measurement of audible noise from overhead transmission lines. Their purpose ... active Standard
789-2013 - IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage EnvironmentsInformation to assist in determining the electrical parameters of communication and control cables necessary to improve the overall reli ... active Standard
802-2014 - IEEE Standard for Local and Metropolitan Area Networks: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802® standards. It describes the reference models for the IEEE 802 standards a ... active Standard
802.1Qch-2017 - IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Amendment 29: Cyclic Queuing and ForwardingThe use of traffic scheduling and per-stream filtering and policing to support cyclic queuing and forwarding are described in this amend ... active Standard
802.1Qci-2017 - IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Amendment 28: Per-Stream Filtering and PolicingEnhancements to the forwarding process that support per-stream filtering and policing are provided in this amendment to IEEE Std 802.1Q- ... active Standard
802.1Xbx-2014 - IEEE Standard for Local and metropolitan area networks -- Port-Based Network Access Control Amendment 1: MAC Security Key Agreement Protocol (MKA) ExtensionsMedia Access Control security (MACsec) Key Agreement protocol (MKA) data elements and procedures that provide additional security and ma ... active Standard
802.1AB-2016 - IEEE Standard for Local and metropolitan area networks - Station and Media Access Control Connectivity DiscoveryThis document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stati ... active Standard
802.1AC-2016 - IEEE Standard for Local and metropolitan area networks -- Media Access Control (MAC) Service DefinitionThe MAC Service and the Internal Sublayer Service (ISS) are defined in this standard. This standard specifies media-dependent convergenc ... active Standard
802.1AEcg-2017 - IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Security - Amendment 3: Ethernet Data Encryption devicesEthernet Data Encryption devices (EDEs) are specified in this amendment. An EDE is a two-port bridge that uses MACsec to provide secure ... active Standard
802.1AS-2011 - IEEE Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area NetworksThis standard defines a protocol and procedures for the transport of timing over bridged and virtual bridged local area networks. It inc ... active Standard
802.1AX-2014 - IEEE Standard for Local and metropolitan area networks -- Link AggregationMAC-independent Link Aggregation capability and general information relevant to specific MAC types are defined in this standard. Link Ag ... active Standard
802.1CB-2017 - IEEE Standard for Local and metropolitan area networks--Frame Replication and Elimination for ReliabilityThis standard specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replicati ... active Standard
802.2-1989 - IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 2: Logical Link ControlThis standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ... withdrawn Standard
802.3-2015 - IEEE Standard for EthernetEthernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access ... active Standard
802.3-2015/Cor 1-2017 - IEEE Standard for Ethernet - Corrigendum 1: Multi-lane TimestampingThis corrigendum to IEEE Std 802.3-2015 clarifies which lane of the media dependent interface (MDI) of a multi-lane Physical Layer entit ... active Standard
802.3bp-2016 - IEEE Standard for Ethernet Amendment 4: Physical Layer Specifications and Management Parameters for 1 Gb/s Operation over a Single Twisted-Pair Copper CableThis amendment to IEEE Std 802.3-2015 adds point-to-point 1 Gb/s Physical Layer (PHY) specifications and management parameters for opera ... active Standard
802.3bq-2016 - IEEE Standard for Ethernet Amendment 3: Physical Layer and Management Parameters for 25 Gb/s and 40 Gb/s Operation, Types 25GBASE-T and 40GBASE-TThis amendment to IEEE Std 802.3-2015 specifies new Physical Coding Sublayer (PCS) interfaces and new Physical Medium Attachment (PMA) s ... active Standard
802.3br-2016 - IEEE Standard for Ethernet Amendment 5: Specification and Management Parameters for Interspersing Express TrafficThis amendment to IEEE Std 802.3-2015 specifies additions to and appropriate modifications to add support for interspersing express traf ... active Standard
802.3bs-2017 - IEEE Standard for Ethernet Amendment 10: Media Access Control Parameters, Physical Layers, and Management Parameters for 200 Gb/s and 400 Gb/s OperationClause 116 through Clause 124 and Annex 119A through Annex 120E are added by this amendment to IEEE Std 802.3-2015. This amendment inclu ... active Standard
802.3bu-2016 - IEEE Standard for Ethernet--Amendment 8: Physical Layer and Management Parameters for Power over Data Lines (PoDL) of Single Balanced Twisted-Pair EthernetSpecifications and management parameters for the provision of power via a single twisted pair to connected Data Terminal Equipment (DTE) ... active Standard
802.3bz-2016 - IEEE Standard for Ethernet Amendment 7: Media Access Control Parameters, Physical Layers, and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation, Types 2.5GBASE-T and 5GBASE-TEthernet Media Access Control (MAC) parameters, Physical Layer specifications, and management objects for the transfer of Ethernet forma ... active Standard
802.3cc-2017 - IEEE Approved Draft Standard for Ethernet Amendment: Physical Layer and Management Parameters for Serial 25 Gb/s Ethernet Operation Over Single-Mode FiberThis amendment to IEEE Std 802.3-2015 adds Physical Layer (PHY) specifications and management parameters for 25 Gb/s operation over sing ... active Standard
802.15.4-2015 - IEEE Standard for Low-Rate Wireless NetworksThe protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-rang ... active Standard
802.15.4q-2016 - IEEE Standard for Low-Rate Wireless Networks --Amendment 2: Ultra-Low Power Physical LayerTwo alternate physical layers (PHYs), TASK and RS-GFSK, are specified in this amendment in addition to the PHYs of IEEE Std 802.15.4-201 ... active Standard
802.15.4t-2017 - IEEE Standard for Low-Rate Wireless Networks--Amendment 4: Higher Rate (2 Mb/s) Physical (PHY) LayerThis amendment defines a physical layer for IEEE Std 802.15.4(TM)-2015, capable of supporting 2 Mb/s data rates, utilizing the 2400-2483 ... active Standard