Standard Icon

Smart Grid Standards

Displaying results 1 - 40 of 161
Standard Name
StatusHelp
80-2000 - Guide for Safety in AC Substation Grounding Outdoor ac substations, either conventional or gas-insulated, are covered in this guide. Distribution, transmission, and generating plant... Superseded Standard
80-1986 - Guide for Safety in AC Substation Grounding The third edition of this guide represents the first major revision since its first issue in 1961. Major modifications include the redefinition of... Superseded Standard
80-2013 - Approved Draft Guide for Safety in AC Substation Grounding This guide is primarily concerned with outdoor AC substatons, either air-insulated or gas-insulated. Distribution, transmission and power plant... Active Standard
81.2-1991 - Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems The purpose of this guide is to present practical instrumentation methods that may be used for the measurement of impedance to remote earth, step... Withdrawn Standard
81-1983 - Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System Part 1: Normal Measurements The technique of measuring ground resistance and impedance, earth resistivity, potential gradients from currents in the earth, and the prediction... Superseded Standard
81-2012 - Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System Practical test methods and techniques are presented for measuring the electrical characteristics of grounding systems. Topics addressed include... Active Standard
367-1996 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault Guidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Superseded Standard
367-1987 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault Wire-line telecommunication facilities serving electric power stations often require that extraordinary protection measures be taken to protect... Superseded Standard
367-2012 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault Guidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Active Standard
487-2000 - Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations Workable methods for protecting wire-line communication circuits entering electric supply locations are presented. This document covers: the... Superseded Standard
487-1992 - Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Power Stations Workable methods for protecting wire-line communication circuits entering power stations are presented. This standard covers: the electric power... Superseded Standard
487-1980 - Guide for the Protection of Wire-Line Communication Facilities Serving Electric Power Stations Wire-line communication facilities serving electric power stations often require special high-voltage protection against the effects of fault... Superseded Standard
487-2007 - Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations Workable methods for protecting wire-line communication circuits entering electric supply locations are presented. This document covers: the... Active Standard
644-1994 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines In this IEEE Standard uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC)... Active Standard
644-1987 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines Establishes uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power... Withdrawn Standard
656-1992 - the Measurement of Audible Noise from Overhead Transmission Lines In this standard uniform procedures are established for manual and automatic measurement of audible noise from overhead transmission lines. Their... Active Standard
656-1985 - the Measurement of Audible Noise from Overhead Transmission Lines The purpose of this standard is to establish uniform procedures for the measurement of audible noise from overhead transmission lines, using... Superseded Standard
802.1AB-2009 - Station and Media Access Control Connectivity Discovery This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in... Active Standard
802.1AB-2005 - Station and Media Access Control Connectivity Discovery This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in... Superseded Standard
802.2-1989 - Specific Requirements - Part 2: Logical Link Control This standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open... Withdrawn Standard
802.3-2000 - Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.3-1985 - Local Area Networks: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) - (ETHERNET) The carrier sense multiple access with collision detection (CSMA/CD) media access method is the means by which two or more stations share a common... Superseded Standard
802.3-2012 - Ethernet Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control ... Active Standard
802.3-2008 - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3-2005 - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control ... Superseded Standard
802.3-2002 - Specific requirements-- Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium... Superseded Standard
802.11-1999 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications This standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant... Superseded Standard
802.11-1997 - Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications The medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, part of a... Superseded Standard
802.11-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
802.11-2007 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Superseded Standard
802.15.1-2002 - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs) The lower transport layers [(Logical Link Control and Adaptation Protocol (L2CAP), Link Manager Protocol (LMP), baseband and radio] of the... Superseded Standard
802.15.4-2011 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio... Active Standard
802.15.4-2006 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low... Superseded Standard
802.15.4-2003 - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN) This standard defines the protocol and compatible interconnection for data communication devices using low data rate, low power and low complexity... Superseded Standard
802.15.4g-2012 - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility Networks In this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate... Active Standard
802.16-2012 - Air Interface for Broadband Wireless Access Systems This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile... Active Standard
802.16-2009 - Part 16: Air Interface for Broadband Wireless Access Systems This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile... Superseded Standard
802.16-2004 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems This standard specifies the air interface of fixed broadband wireless access (BWA) systems supporting multimedia services. The medium access... Superseded Standard
802.16-2001 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems This standard specifies the air interface of fixed (stationary) point-to-multipoint broadband wireless access systems providing multiple services.... Superseded Standard
Displaying results 1 - 40 of 161 - all