Standard Icon

Power and Energy Standards

Displaying results 161 - 200 of 1286
Standard Name
Status Help less all
393-1991 - Test Procedures for Magnetic CoresTest methods useful in the design, analysis, and operation of magnetic cores in many types of applications are presented. Tests for specifying and... Active Standard
400-1980 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldThe purpose of this guide is: to provide uniform procedures for performing high-direct-voltage acceptance tests and maintenance tests on power... Superseded Standard
400-1991 - Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the FieldProcedures and recommended test voltage values for acceptance and maintenance high-direct-voltage testing of shielded power cable systems are set... Superseded Standard
400-2001 - Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable SystemsThis guide lists the various field test methods that are currently available or under development with guidance on HOW to perform each test. The... Superseded Standard
400-2012 - Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and AboveVarious field test methods that are currently available or under development are listed in this guide. The guide covers shielded, insulated power... Active Standard
400.1-2007 - Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current VoltageThe recommended practices and procedures for direct voltage acceptance and maintenance testing of shielded, laminated dielectric insulated power... Active Standard
400.2-2004 - Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)This guide describes very low frequency (VLF) withstand and diagnostic tests and the measurements that are performed in the field on shielded... Superseded Standard
400.2-2013 - Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)Very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in the field on shielded... Active Standard
400.3-2006 - Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field EnvironmentThis guide covers the diagnostic testing of new or service-aged installed shielded power cable systems, which include cable, joints, and... Active Standard
402-1974 - Guide for Measuring Resistivity of Cable-Insulation Materials at High Direct Voltages1/92 memo from S. Vogel - Reaff in progress. Submittal expected June 1992 Withdrawn Standard
404-1986 - Cable Joints for Use with Extruded Dielectric Cable Rated 5000 V through 46 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500 V Through 500 000 VTo assure that the performance of the cable joint will equal the performance of the cable it joins electrical ratings and test requirements are... Superseded Standard
404-1993 - Cable Joints for Use With Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints for Use With Laminated Dielectric Cable Rated 2500-500 000 VThis standard establishes electrical ratings and test requirements for cable joints for use with extruded dielectric shielded cable rated in... Superseded Standard
404-2000 - Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500-500 000VThis standard establishes electrical ratings and test requirements of cable joints used with extruded and laminated dielectric shielded cable... Superseded Standard
404-2006 - Extruded and Laminated Dielectric Shielded Cable Joints Rated 2 500v to 500 000vElectrical ratings and test requirements of cable joints used with extruded and laminated dielectric shielded cable rated in preferred voltage... Superseded Standard
404-2012 - Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kVElectrical ratings and test requirements of cable joints used with extruded and laminated dielectric shielded cable rated in preferred voltage... Active Standard
415-1986 - Guide for Planning of Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating StationsThis guide provides guidance for the planning of preoperational test programs for Class 1E power systems for nuclear power generating stations.... Withdrawn Standard
420-1982 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsDesign requirements that are unique to Class 1E control boards, panels, and racks are specified. Standards for qualification tests to verify that... Superseded Standard
420-2001 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class control boards, panels, and racks and establishes the methods to... Superseded Standard
420-2013 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class 1E control boards, panels, and racks and establishes the methods to... Active Standard
421.1-1986 - Standard Definitions for Excitation Systems for Synchronous MachinesDefines elements and commonly used components in excitation control systems and contains definitions for excitation systems as applied to... Superseded Standard
421.1-2007 - Standard Definitions for Excitation Systems for Synchronous MachinesThis standard defines elements and commonly used components in excitation systems and contains definitions for excitation systems applied to... Active Standard
421.2-1990 - Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control SystemsThis guide includes criteria, definitions, and test objectives for evaluating the dynamic performance of excitation control systems as applied by... Superseded Standard
421.2-2014 - Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control SystemsThis guide includes criteria, definitions, and test procedures for evaluating the dynamic performance of excitation control systems for... Active Standard
421.3-1998 - High-Potential Test Requirements for Excitation Systems for Synchronous MachinesHigh-potential test voltages for excitation systems used with synchronous machines are established. Test voltages are established based on whether... Active Standard
421.4-1990 - Guide for the Preparation of Excitation System SpecificationsThe purpose of the guide is to aid in the preparation of procurement specifications for excitation systems for synchronous machines rated 5000 kVA... Superseded Standard
421.4-2004 - Guide for the Preparation of Excitation System SpecificationsThis guide is intended to provide to the specification writer the information to prepare a specification for the purchase of an excitation system.... Superseded Standard
421.4-2014 - Guide for the Preparation of Excitation System SpecificationsThis guide is intended to provide to the specification writer the information to prepare a specification for the purchase of an excitation system.... Active Standard
421.5-1992 - Recommended Practice for Excitation System Models for Power System Stability StudiesExcitation system models suitable for use in large scale power system stability studies are presented. With these models, most of the excitation... Superseded Standard
421.5-2005 - Recommended Practice for Excitation System Models for Power System Stability StudiesExcitation system models suitable for use in large-scale system stability studies are presented. Important limiters and supplementary controls are... Active Standard
421A-1978 - Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control SystemsThis IEEE guide includes criteria, definitions, and test procedures for evaluating the dynamic performance of excitation control systems as... Superseded Standard
421B-1979 - High-Potential-Test Requirements for Excitation Systems for Synchronous MachinesThis standard applies to high-potential testing of complete excitation systems and their components for synchronous machines. Also included are... Superseded Standard
422-1986 - Guide for the Design and Installation of Cable Systems in Power Generating StationsThis guide provides guidance and recommended practices on the installation and maintenance of liquid-immersed power transformers rated 501 kVA and... Withdrawn Standard
422-2012 - Guide for the Design of Cable Raceway Systems for Electric Generating FacilitiesGuidance for the design and installation of cable raceway systems for all types of electric generating facilities is provided. Recommendations,... Active Standard
428-1981 - Standard Definitions and Requirements for Thyristor AC Power ControllersThese recommendations apply to thyristor AC power controllers that are low voltage, power electronic, industrial class equipment for the control... Withdrawn Standard
429-1994 - Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and BelowIn this IEEE standard a test procedure for comparing two or more sealed insulation systems in accordance with their expected life at rated... Withdrawn Standard
430-1986 - Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and SubstationsThe primary purpose of this standard is to establish uniform procedures for the measurement of radio noise generated by corona from overhead power... Withdrawn Standard
432-1976 - Guide for Insulation Maintenance for Rotating Electrical Machinery (5 hp to less than 10 000 hp)This insulation maintenance guide is intended to apply in general to industrial air-cooled rotating electrical machines rated from 5 hp to 10000... Superseded Standard
432-1992 - Guide for Insulation Maintenance for Rotating Electric Machinery (5 hp to less than 10 000 hp)In this standard, information necessary to permit an effective evaluation of the insulation systems of medium and small rotating electric machines... Withdrawn Standard
433-1974 - Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Voltage at Very Low FrequencyThis document provides a uniform method of VLF testing in order to obtain consistent results, accumulate meaningful experience, and lead to... Withdrawn Standard
433-2009 - Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low FrequencyThis recommended practice describes very low frequency withstand and diagnostic tests that are performed on the stator windings of ac electric... Active Standard