Standard Icon

Power and Energy Standards

Displaying results 1241 - 1280 of 1291
Standard Name
Status Help less all
C62.37-1996 - Standard Test Specification for Thyristor Diode Surge Protective DevicesThis standard applies to two or three terminal, four or five layer, thyristor surge protection devices (SPDs) for application on power systems... Active Standard
C62.37.1-2000 - Guide for the Application of Thyristor Surge Protective DevicesApplications information on fixed voltage and gated thyristor surge protective devices (SPDs) are provided. Key device parameters and their... Superseded Standard
C62.37.1-2012 - Guide for the Application of Thyristor Surge Protective Device ComponentsApplications information on fixed-voltage and gated-thyristor surge protective components (SPCs) is provided. Key device parameters and their... Active Standard
C62.38-1994 - Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)This guide establishes test methods for the evaluation of ESD withstand capability for electronic equipment subassemblies. It includes information... Withdrawn Standard
C62.39-2012 - Test Methods and Preferred Values for Self-Restoring Current-Limiter Components Used in Telecommunication Surge ProtectionThe basic requirements to be met by series connected, solid-state, self-restoring overcurrent protectors (OCPs) for the protection of... Active Standard
C62.41-1980 - Guide for Surge Voltages in Low-Voltage AC Power CircuitsThis IEEE guide for surge voltages in LV AC power circuits addresses circuits with rated voltages up to 277 V line to ground. The main purpose of... Superseded Standard
C62.41-1991 - Recommended Practice for Surge Voltages in Low-Voltage AC Power CircuitsA practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of... Superseded Standard
C62.41.1-2002 - Guide on the Surge Environment in Low-Voltage (1000 V and less) AC Power CircuitsThis is a guide describing the surge voltage, surge current, and temporary overvoltages (TOV) environment in low-voltage [up to 1000 V root mean... Active Standard
C62.41.2-2002 - Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and less) AC Power CircuitsThe scope of this recommended practice is to characterize the surge environment at locations on AC power circuits described in IEEE Std C62.41.1... Active Standard
C62.42-1987 - Guide for the Application of Gas Tube Arrester Low-Voltage Surge-Protective DevicesThe application guide applies to surge-protective devices used in systems with voltages of 1000 V RMS and 1200 V DC or less. These protective... Superseded Standard
C62.42-1992 - Guide for the Application of Gas Tube and Air Gap Arrester Low-Voltage (Equal to or Less than 1000 V rms or 1200 V dc) Surge Protective DevicesIn this standard, assistance in selecting the most appropriate type of low-voltage surge-protective device (either gas tube or air gap) for a... Superseded Standard
C62.42-2005 - Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] CircuitsAssistance in selecting the most appropriate type of low-voltage component surge-protective device (gas tube, air gap, metal-oxide varistor, or... Active Standard
C62.43-1999 - Guide for the Application of Surge Protectors Used in Low-Voltage (Less Than Or Equal To 1000 Vrms or 1200 Vdc) Data, Communications, and Signaling CircuitsAssistance is provided for the selection of the most appropriate type of low-voltage data, communications, and/or signalling circuit surge... Superseded Standard
C62.43-2005 - Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 Vrms or 1200 Vdc) Data, Communications, and Signaling CircuitsThis guide provides assistance in selecting the most appropriate type of surge protector for a particular data, communication, and/or signaling... Active Standard
C62.45-1987 - Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power CircuitsThis document provides guidance on surge testing AC power interfaces of equipment connected to low-voltage circuits that are subject to transient... Superseded Standard
C62.45-1992 - Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power CircuitsGuidance is provided for applying surge testing to ac power interfaces of equipment connected to low-voltage ac power circuits that are subject to... Superseded Standard
C62.45-2002 - Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and less) AC Power CircuitsThe scope of this recommended practice is the performance of surge testing on electrical and electronic equipment connected to low-voltage ac... Active Standard
C62.47-1992 - Guide on Electrostatic Discharge: Characterization of the ESD EnvironmentThe electromagnetic threat posed to electronic equipment and subassemblies by actual electrostatic discharge (ESD) events from humans and mobile... Withdrawn Standard
C62.48-1995 - Guide on Interactions Between Power System Disturbances and Surge-Protective DevicesIn this IEEE standard information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that may occur... Superseded Standard
C62.48-2005 - Guide on Interactions Between Power System Disturbances and Surge Protective DevicesInformation is provided to users and manufacturers of surge-protective devices (SPIDs) about the interactions that can occur between SPIDs and... Active Standard
C62.62-2000 - Standard Test Specifications for Surge Protective Devices for Low Voltage AC Power CircuitsThis standard establishes methods for testing and measuring the performance characteristics for surge-protective devices used in low-voltage AC... Superseded Standard
C62.62-2010 - Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power CircuitsSurge-protective devices (SPDs) intended to be installed on the load side of the service equipment connected to 50 Hz or 60 Hz AC power circuits... Active Standard
C62.64-1997 - Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling CircuitsThis standard applies to surge protectors for application on multiconductor and coaxial, balanced or unbalanced, data, communications and... Superseded Standard
C62.64-2009 - Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications,and Signaling CircuitsSurge protectors for application on multiconductor and coaxial, balanced or unbalanced, data, communications, and signaling circuits with voltages... Active Standard
C62.72-2007 - Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power CircuitsInformation is provided to specifiers and users of surge-protective devices (SPDs) about the application considerations of SPDs associated with... Active Standard
C62.82.1-2010 - Insulation Coordination--Definitions, Principles, and RulesRevision of IEEE Std 1313.1-1996. The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase... Active Standard
C62.92-1987 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 - IntroductionSome basic considerations for the selection of neutral grounding parameters that will provide for the control of ground-fault current and... Superseded Standard
C62.92.1-1987 - Guide for the Application of Neutral Grounding in Electrical Utility Systems Part I--IntroductionThe purpose of this guide and subsequent revisions to IEEE Std 143-1954 [8]1 is to present some basic considerations for the selection of neutral... Superseded Standard
C62.92.1-2000 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 - IntroductionThis guide is the introduction to the C62.92 series of five IEEE guides on neutral grounding in three-phase electrical utility systems. It... Active Standard
C62.92.2-1989 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator SystemsReaffirmed in 2005 General considerations for grounding synchronous generator systems are summarized, focusing on the objectives of generator... Active Standard
C62.92.3-1993 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III - Generator Auxiliary SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power... Superseded Standard
C62.92.3-2012 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power... Active Standard
C62.92.4-1991 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV-DistributionIn this standard the neutral grounding of singleand three-phase AC electric utility primary distribution systems with nominal voltages in the... Active Standard
C62.92.5-2000 - Guide for the Application of Neutral Grounding in Electric Utility Systems, Part V - Transmission Systems and Subtransmission SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or subtransmission... Superseded Standard
C62.92.5-2009 - Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission SystemsBasic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or subtransmission... Active Standard
C92.2-1987 - American National Power Systems - Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal-Preferred Voltage RatingsThe article presents ANSI standard C92.2-1987. This standard supersedes ANSI C92.2-1981, preferred voltage ratings for alternating-current... Superseded Standard
C93.3-2004 - American National Standard--Requirements for Power-Line Carrier Line TrapsThis standard applies to a line trap inserted into a power circuit to minimize carrier-frequency signal losses. The standard covers line traps in... Active Standard
C93.4-2012 - Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission LinesPower-line carrier (PLC) line-tuning equipment connected between the coupling capacitors and PLC transmitter/receiver terminals operating in the... Active Standard