Standard Icon

Power and Energy Standards

Displaying results 801 - 840 of 1396
Standard Name
Status Help less all
1361-2003 - Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) SystemsThis guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone photovoltaic (PV) system... Active Standard
1366-2003 - Guide for Electric Power Distribution Reliability IndicesDistribution reliability indices and factors that affect their calculations are defined in this guide. The indices are intended to apply to... Superseded Standard
1366-1998 - Guide for Electric Power Distribution Reliability IndicesUseful distribution reliability indices, and factors that affect their calculation, are identified. This guide includes indices that are useful... Superseded Standard
1366-2012 - Guide for Electric Power Distribution Reliability IndicesDistribution reliability indices and factors that affect their calculations are defined in this guide. The indices are intended to apply to... Active Standard
1368-2006 - Guide for Aeolian Vibration Field Measurements of Overhead ConductorsCurrent practices related to field measurements of aeolian vibration of overhead conductors are covered in this guide. Active Standard
1374-1998 - Guide for Terrestrial Photovoltaic Power System SafetyThe design, equipment applicability and hardware installation of electrically safe, stand-alone and grid-connected PV power systems operating at... Withdrawn Standard
1375-1998 - Guide for the Protection of Stationary Battery SystemsGuidance in the protection of stationary battery systems is provided. For the purposes of this guide, stationary battery systems include the... Active Standard
1378-1997 - Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission SystemsGeneral guidelines for commissioning high-voltage direct-current (HVDC) converter stations and associated transmission systems are provided in... Active Standard
1379-2000 - Recommended Practice for Data Communications Between Remote Terminal Units and Intelligent Electronic Devices in a SubstationA uniform set of guidelines for communications and interoperations of remote terminal units (RTUs) and intelligent electronic devices (IEDs) in an... Withdrawn Standard
1379-1997 - Recommended Practice for Data Communications Between Intelligent Electronic Devices and Remote Terminal Units in a SubstationA uniform set of guidelines for communications and interoperations of intelligent electronic devices (IEDs) and remote terminal units (RTUs) in an... Superseded Standard
1388-2000 - the Electronic Reporting of Transformer Test DataA basis for the electronic reporting of transformer test data on liquid immersed distribu-tion transformers as defined in the ANSI C57.12.2X... Superseded Standard
1390-1995 - Utility Telemetry Service Architecture for Switched Telephone NetworkThis IEEE standard describes a utility telemetry service architecture operated over the telephone network. The architecture described is a basic... Withdrawn Standard
1390.2-1999 - Utility Telemetry Service - Telemetry Interface Unit (TIU) to Telephone NetworkThe telephone network interface to a telemetry interface unit operating under the utility telemetry service architecture is described. The... Withdrawn Standard
1390.3-1999 - Automatic Meter Reading via Telephone - Network to Utility ControllerThis telephone network interface to a utility controller operating under the utility telemetry service architecture is described. The interface is... Withdrawn Standard
1402-2000 - Guide for Electric Power Substation Physical and Electronic SecuritySecurity issues related to human intrusion upon electric power supply substations are identified and discussed. Various methods and techniques... Active Standard
1406-1998 - Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable SystemsIn this standard, the application of the analysis of gases dissolved in the fluids of fluid-filled cable systems is discussed with respect to the... Active Standard
1407-1998 - Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled TanksAccelerated aging tests on extruded medium-voltage cables using water-filled tanks are addressed. Information on the equipment, cable samples,... Superseded Standard
1407-2007 - Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled TanksAccelerated aging tests on extruded medium-voltage cables using water-filled tanks are addressed. Information on the equipment, cable samples,... Active Standard
1410-2004 - Guide for Improving the Lightning Performance of Electric Power Overhead Distribution LinesThis design guide contains information on methods to improve the lightning protection performance of overhead distribution lines and is written... Superseded Standard
1410-1997 - Guide for Improving the Lightning Performance of Electric Power Overhead Distribution LinesThis IEEE Guide discusses measures for improving the lightning protection performance of schemes applied to overhead power distribution lines. Superseded Standard
1415-2006 - Guide for Induction Machinery Maintenance Testing and Failure AnalysisThis guide provides maintenance testing and failure analysis guidance for form-wound, squirrel cage, induction machinery rated up to 15 kV. It... Active Standard
1416-1998 - Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated SubstationsRecommendations for the connection of a gas-insulated substation to another gas-insulated substation of a different make are given. Active Standard
1425-2001 - Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable SystemsThis guide provides technical information regarding factors that can affect the life of an impregnated paper-insulated transmission cable system,... Active Standard
1427-2006 - Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power SubstationsThis guide, covering three-phase ac systems from 1 kV to 800 kV, provides recommended electrical operating and safety clearances and insulation... Active Standard
1428-2004 - Guide for Installation Methods for Fiber Optic Cables in Electric Power Generating Stations and in Industrial FacilitiesThis guide is intended for cables designed for use in power generating stations and industrial facilities, in both the outside plant environment... Active Standard
1434-2000 - Guide to the Measurement of Partial Discharges in Rotating MachineryA review of the nature of partial discharge in machine windings, how it can be measured under both off-line and on-line conditions, how it can be... Active Standard
1441-2004 - Guide for Inspection of Overhead Transmission Line ConstructionVarious approaches to good inspection practices for the construction of overhead transmission lines are covered in this guide. Inspection... Withdrawn Standard
1453-2004 - Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power SystemsVoltage fluctuations on electric power systems sometimes give rise to noticeable illumination changes from lighting equipment. This phenomenon is... Withdrawn Standard
1458-2005 - Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial ApplicationsA recommended procedure for the selection, application, and determination of the remaining life in molded case circuit breaker is provided. Active Standard
1459-2000 - Standard Definitions for the Measurement of Electric Power Quantities under Sinusoidal, Non-Sinusoidal, Balanced, or Unbalanced ConditionsThis is a trial-use standard for definitions used for measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or... Superseded Standard
1459-2010 - Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced ConditionsThis document provides definitions of electric power to quantify the flow of electrical energy in single-phase and three-phase circuits under... Active Standard
1491-2005 - Guide for Selection and Use of Battery Monitoring Equipment in Stationary ApplicationsMonitoring and measurement of battery parameters is an important element of maintaining a fully operational battery system. This guide presents... Superseded Standard
1493-2006 - Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and AccessoriesTest procedures for evaluating the physical characteristics of cable cleaning solvents and their compatibility with extruded dielectric cable... Active Standard
1511-2004 - Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV Through 46 kVThis guide applies to the process of investigating, evaluating, and analyzing field failures. This guide covers the overall format for failure... Active Standard
1513-2001 - Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Receiver Sections and ModulesThe minimum tests and inspections required to evaluate photovoltaic concentrating modules, and a common approach (e.g., between producer and... Withdrawn Standard
1515-2000 - Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test MethodsThis recommended practice defines many common parameters for AC-DC and DC-DC electronic power distribution components and subsystems. This enables... Active Standard
1523-2002 - Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic InsulatorsVarious important aspects that are needed for satisfactory long-term performance of high-voltage insulator coatings (HVIC) are presented in this... Active Standard
1526-2003 - Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic SystemsTests to determine the performance of stand-alone photovoltaic (PV) systems and for verifying PV system design are presented in this recommended... Active Standard
1527-2006 - Recommended Practice for the Design of Flexible Buswork Located in Seismically Active AreasThe engineering and design of flexible bus connections for bus and equipment in electric power substations is described. This recommended practice... Active Standard
1531-2003 - Guide for Application and Specification of Harmonic FiltersGuidelines for specification of components, protection, and control of harmonic filters are provided. This guide applies to the use of 50 Hz and... Active Standard