Standard Icon

Power and Energy Standards

Displaying results 601 - 640 of 1335
Standard Name
Status Help less all
1043-1989 - Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and CoilsThis report covers the voltage-endurance testing of form-wound bars and coils for use in large rotating machines. Such testing is defined for... Superseded Standard
1043-1996 - Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and CoilsThe voltage endurance testing of form-wound bars and coils for use in large rotating machines is covered in this paper. Active Standard
1046-1991 - Application Guide for Distributed Digital Control and Monitoring for Power PlantsAlternate approaches to applying a digital control system, for both new construction and existing plant modernization projects, are described, and... Withdrawn Standard
1048-1990 - Guide for Protective Grounding of Power LinesThe primary purpose of protective groundings is to limit the voltage difference between any two accessible points at the work site to a safe value... Superseded Standard
1048-2003 - Guide for Protective Grounding of Power LinesGuidelines for protective grounding methods for individuals engaged in de-energized overhead transmission and distribution line maintenance are... Active Standard
1050-1989 - Guide for Instrumentation and Control Equipment Grounding in Generating StationsThe purpose of this report is to provide guidance for the design of grounding systems for instrumentation and control equipment specific to power... Superseded Standard
1050-1996 - Guide for Instrumentation and Control Equipment Grounding in Generating StationsIn this IEEE standard information about grounding methods for generating station instrumentation and control (I&C) equipment is provided. The... Superseded Standard
1050-2004 - Guide for Instrumentation and Control Equipment Grounding in Generating StationsInstrumentation and control (I&C) equipment grounding methods to achieve both a suitable level of protection for personnel and equipment, and... Active Standard
1064-1991 - Guide for Multifactor Stress Functional Testing of Electrical Insulation SystemsA guide for developing test procedures for the functional testing of insulation systems used in long-life electrical equipment exposed to more... Withdrawn Standard
1067-1990 - Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ACThis guide provides recommendations for the in-service use, care, maintenance, and electrical testing of conductive clothing, including suits,... Superseded Standard
1067-1996 - Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ac and ý 750 kV dcRecommendations are provided for the in-service use, care, maintenance, and electrical testing of conductive clothing, including suits, gloves,... Superseded Standard
1067-2005 - Guide for In-Service Use, Care, Maintenance and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and 750 kV DCGeneral recommendations for the in-service care, maintenance, and testing of the conductive clothing worn by workers to perform work in high... Superseded Standard
1067-2012 - Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and +/-750 kV DCGeneral recommendations for the in-service care, maintenance, and testing of the conductive clothing worn by workers to perform work in high... Active Standard
1068-1990 - Recommended Practice for Repair and Rewinding of Motors for the Petroleum and Chemical IndustryThis recommended practice is intended to be a basic or primary document that can be utilized and referenced by owners of electric motors that need... Superseded Standard
1068-1996 - Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical IndustryGeneral recommendations are provided for users of motors that need repair as well as owners and operators of establishments that offer motor... Superseded Standard
1068-2009 - the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process IndustriesThis standard is intended to be a basic or primary document that can be utilized and referenced by owners of ac motors and generators (machines)... Active Standard
1069-1991 - Recommended Practice for Precipitator and Baghouse Hopper Heating SystemsRecommendations on electric hopper heating system performance and equipment requirements necessary to provide an economical and effective hopper... Withdrawn Standard
1070-2006 - Guide for the Design and Testing of Transmission Modular Restoration Structure ComponentsA generic specification, including design and testing, for transmission modular restoration structure components used by electric utilities is... Active Standard
1070-1988 - Guide for the Design and Testing of Transmission Modular Restoration Structure ComponentsThe purpose of this IEEE guide is to make available to the industry a generic specification that can be used by electric utilities for acquisition... Superseded Standard
1070-1995 - Guide for the Design and Testing of Transmission Modular Restoration Structure ComponentsA generic specification, including design and testing, for transmission modular restoration structure components used by electric utilities is... Withdrawn Standard
1082-1997 - Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating StationsA structured framework for the incorporation of human/system interactions into probabilistic risk assessments for nuclear power plants is provided... Active Standard
1094-1991 - Recommended Practice for the Electrical Design and Operation of Windfarm Generating StationsDesign information and procedures for the interconnection of multiple wind turbines (a windfarm generating station) with an electrical utility are... Withdrawn Standard
1095-1989 - Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric ApplicationsThe procedures for installation, described in this guide, apply to all types of synchronous generators and generator/motors rated 5000 kVA and... Superseded Standard
1095-2012 - Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric ApplicationsThe procedures for installation described in this guide apply to all types of synchronous generators and generator/motors rated 5 MVA and above to... Active Standard
1100-2005 - Recommended Practice for Powering and Grounding Electronic EquipmentThe IEEE Emerald Book presents a collection of consensus best practices for the powering and grounding of electronic equipment used in commercial... Active Standard
1100-1992 - Recommended Practice for Powering and Grounding Sensitive Electronic EquipmentRecommended design, installation, and maintenance practices for electrical power and grounding (including both power-related and signal-related... Superseded Standard
1100-1999 - Recommended Practice for Powering and Grounding Electronic EquipmentRecommended design, installation, and maintenance practices for electrical power and grounding (including both power-related and signal-related... Superseded Standard
1106-1987 - Recommended Practice for Maintenance, Testing, and Replacement of Nickel-Cadmium Storage Batteries for Generating Stations and SubstationsThis recommended practice provides maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of... Superseded Standard
1106-1995 - Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary ApplicationsInstallation design, installation, maintenance and testing procedures, and test schedules that can be used to optimize the life and performance of... Superseded Standard
1106-2005 - Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary ApplicationsThis recommended practice provides recommendations for installation design and for installation, maintenance, and testing procedures that can be... Active Standard
1107-1996 - Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Random-Wound Stator CoilsIn this IEEE standard a test procedure for comparing expected life, at rated temperature, of two or more sealed insulation systems, is outlined.... Withdrawn Standard
1109-1990 - Guide for the Interconnection of User-Owned Substations to Electric UtilitiesThe report provides a checklist and selected guidance, for persons not normally practicing in this specialized field, of major technical design... Withdrawn Standard
1110-1991 - Guide for Synchronous Generator Modeling Practices in Stability AnalysesThis document has been written to assist the power system analyst in choosing appropriate synchronous generator models for power system stability... Superseded Standard
1110-2002 - Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability AnalysesCategorizes three direct-axis and four quadrature-axis models, along with the basic transient reactance model. Discusses some of the assumptions... Active Standard
1115-1992 - Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary ApplicationsMethods for defining the dc load and for sizing a nickel-cadmium battery to supply that load are described. Installation, maintenance,... Superseded Standard
1115-2000 - Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary ApplicationsThe sizing of nickel-cadmium batteries used in full float operation for stationary applications is covered in this recommended practice. Active Standard
1115a-2007 - Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing MarginsThis amendment provides additional guidance on sizing margins that may be applied when nickel-cadmium batteries are used in stationary... Active Standard
1119-1988 - Guide for Fence Safety Clearances in Electric-Supply StationsThe purpose of this standard is to provide design guidance for the location of fences with respect to live parts within an electric-supply station... Withdrawn Standard
1120-2004 - Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable SystemsThis guide provides a list of factors to consider when planning, designing, permitting, installing, commissioning, and repairing submarine power... Active Standard
1120-1990 - Guide to the Factors to Be Considered in the Planning, Design, and Installation of Submarine Power and Communications CablesThis guide presents a list of factors relating to power and communications cables installed in a submarine environment including the shore ends of... Superseded Standard
Displaying results 601 - 640 of 1335 - all results
« 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 »