IEEE Standards Association
Power and Energy Standards
Show:
Displaying results 561 - 600 of 1335
Standard Name
Status 
less all
less all 958-2003 - Guide for Application of AC Adjustable-Speed Drives on 2400 to 13,800 Volt Auxiliary Systems in Electric Power Generating StationsA fundamental understanding of the operation, selection, and application of ac adjustable-speed drives on 2400 to 13 800 V auxiliary systems in... 
972-1985 - Trial-Use Connections of Insulated Aluminum ConductorsThis standard covers connectors used for making electrical connections between insulated aluminum cables rated 601 V through 46 000 V. This...
977-2010 - Guide to Installation of Foundations for Transmission Line StructuresVarious approaches to good construction practices that could improve the installation of transmission line structure foundations are presented.... 
977-1991 - Guide to Installation of Foundations for Transmission Line StructuresVarious approaches to good construction practices that could improve the installation of transmission line structure foundations are presented.... 
978-1984 - Guide for In-Service Maintenance and Electrical Testing of Live-Line ToolsThis guide provides recommendations for in-service inspection, maintenance, and electrical testing of live-line tools. These selected...
979-1984 - Guide for Substation Fire Protection Substation fire-protection practices that generally have been accepted by the electric utility industry and existing fire- protection standards...
979-1994 - Guide for Substation Fire ProtectionIn this IEEE standard guidance is provided to substation engineers in determining the design, equipment and practices deemed necessary for the...
979-2012 - Guide for Substation Fire ProtectionGuidance is provided to substation engineers in determining the design, equipment, and practices deemed necessary for the fire protection of...
980-1987 - Guide for Containment and Control of Oil Spills in SubstationsThe guide discusses the significance of federal oil spillage regulations and their applicability to substations; identifies the problem of oil...
980-1994 - Guide for Containment and Control of Oil Spills in SubstationsIn this IEEE standard the significance of oil-spillage regulations and their applicability to electric supply substations are discussed: the...
987-1985 - Guide for Application of Composite InsulatorsThe standard acts as a guide for the application of composite insulators to overhead transmission and distribution lines. It is based on utility...
987-2001 - Guide for Application of Composite InsulatorsA guide to the application of composite insulators to overhead transmission and distribution lines is provided. It is based on utility field...
998-1996 - Guide for Direct Lightning Stroke Shielding of SubstationsDesign information for the methods, historically and typically applied by substation designers to minimize direct lightning strokes to equipment...
999-1992 - Recommended Practice for Master/Remote Supervisory Control and Data Acquisition (SCADA) CommunicationsThe use of serial digital transmission by supervisory control and data acquisition (SCADA) systems having geographically dispersed terminals is...
1001-1988 - Guide for Interfacing Dispersed Storage and Generation Facilities with Electric Utility SystemsThe purpose of this IEEE guide is to alert electric utilities, manufacturers of dispersed storage and generation (DSG) equipment, consultants,...
1004-1987 - Standard Definitions of Planar Transmission LinesIt has been recognized that a standard was needed for planar transmission lines which are an important transmission medium in hybrid and...
1007-1991 - Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and SystemsTest equipment requirements and methods for testing the transmission characteristics of PCM telecommunications equipment, circuits, and systems...
1010-1987 - Guide for Control of Hydroelectric Power PlantsDescribes the control and monitoring requirements for equipment and systems associated with conventional and pumped-storage hydroelectric plants....
1010-2006 - Guide for Control of Hydroelectric Power PlantsThis guide serves as a reference document for practicing engineers in the hydroelectric industry. It documents prevailing industry practices in...
1013-1990 - Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) SystemsDescribes methods for sizing both vented and valve regulated lead-acid batteries used with terrestrial photovoltaic (PV) systems. The purpose is...
1013-2000 - Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) SystemsA method for sizing both vented and valve-regulated lead-acid batteries used in terrestrial photovoltaic (PV) systems is described. Installation,...
1013-2007 - Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) SystemsA method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial...
1015-1997 - Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power SystemsInformation is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application...
1015-2006 - Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power SystemsInformation is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application...
1018-1985 - Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene Propylene Rubber InsulationThe recommended practice, under the jurisdiction of the IEEE Industry Applications Society, Petroleum and Chemical Industry Committee, presents...
1018-1991 - Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber InsulationIn this standard minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are...
1018-2004 - Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber InsulationMinimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. The cable...
1020-1988 - Guide for Control of Small Hydroelectric Power PlantsThis guide presents descriptive material intended to assist in the planning for the design, development, and operation of small hydroelectric...
1021-1988 - Recommended Practice for Utility Interconnection of Small Wind Energy Conversion SystemsThe purpose of this recommended practice is to provide a small wind energy conversion system (SWECS) user, owner, or installer with interface...
1023-1988 - Guide for the Application of Human Factors Engineering to Systems, Equipment and Facilities of Nuclear Power Generating StationsThe intent of this guide is to provide guidance to management and engineers to develop an integrated program for the application of human factors...
1023-2004 - Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear FacilitiesThis document provides recommended practices for applying human factors engineering (HFE) to systems and equipment that have significant human...
1024-1988 - Recommended Practice for Specifying Distribution Composite Insulators (Suspension Type)The IEEE recommended practice covers distribution suspension type composite insulators made from a core, weathersheds, and metal end fittings that...
1025-1993 - Guide to the Assembly and Erection of Concrete Pole StructuresGood practice that will improve the ability to assemble and erect self-supporting and guyed concrete pole structures for overhead transmission...
1026-1995 - Recommended Practice for Test Methods for Determination of Compatibility of Materials With Conductive Polymeric Insulation Shields and JacketsIn this IEEE Standard a test method is provided to qualify various essentially nonvolatile, highly viscous fluids or solid materials at 90/spl deg...
1030-1987 - Guide for Specification of High-Voltage Direct-Current Systems: Part 1 - Steady State PerformanceThe report provides general guidance on the steady-state performance requirements of high-voltage direct-current (HVDC) systems. It concerns the...
1031-1991 - Guide for a Detailed Functional Specification and Application of Static VAR CompensatorsGeneral information that should be considered during procurement of a static VAR compensator (SVC) is provided. The information is intended to...
1031-2000 - Guide for the Functional Specification of Transmission Static Var CompensatorsThis guide documents an approach to preparing a specification for a transmission static var compensator. The document is intended to serve as a...
1033-1985 - Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating StationsThis document provides the recommended practice for application of ANSI/IEEE Std 828-1983, IEEE Standard for Software Configuration Management...
1035-1989 - Recommended Practice: Test Procedure for Utility-Interconnected Static Power ConvertersThe following topics were dealt with: This test procedure is a recommended practice for testing utility-interconnected static power converters....
1036-1992 - Guide for Application of Shunt Power CapacitorsGuidelines for the application, protection, and ratings of equipment for the safe and reliable utilization of shunt power capacitors are provided....