Standard Icon

Power and Energy Standards

Displaying results 481 - 520 of 1460
Standard Name
Status Help less all
930-2004 - (Replaced) Guide for the Statistical Analysis of Electrical Insulation Breakdown DataThis guide describes, with examples, statistical methods to analyze times to break down and breakdown voltage data obtained from electrical... Active Standard
933-1999 - Guide for the Definition of Reliability Program Plans for Nuclear Power Generating StationsGuidelines for the definition of a reliability program at nuclear power generating stations are developed. Reliability programs during the... Superseded Standard
933-2013 - Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear FacilitiesGuidelines for the definition of a reliability program at nuclear generating stations and other nuclear facilities are provided. The document... Active Standard
934-1987 - Standard Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating StationsThe standard sets forth basic requirements for the selection and utilization of replacement parts for Class IE equipment in nuclear power... Withdrawn Standard
935-1989 - Guide on Terminology for Tools and Equipment to Be Used in Live Line WorkingThe following topics were dealt with: This standard applies to terminology for tools and equipment used in live overhead power line working. This... Active Standard
936-1987 - Guide for Self-Commutated ConvertersThis guide applies to self-commutated electronic power converters in which commutation is accomplished by components within the converter. In... Withdrawn Standard
937-1987 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsThis recommended practice provides design considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of... Superseded Standard
937-2000 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsDesign considerations and procedures for storage, location, mounting, ventilation, assembly and maintenance, of lead-acid storage batteries for... Superseded Standard
937-2007 - Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) SystemsDesign considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of lead-acid secondary batteries for... Active Standard
943-1986 - Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation SystemsThe purpose of this guide is to present background information necessary for proper construction of ageing mechanisms and selection of diagnostic... Withdrawn Standard
944-1986 - Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating StationsThe application and performance requirements for a low-voltage uninterruptible power supply system used for service in power generating stations... Withdrawn Standard
946-1985 - Recommended Practice for the Design of Safety-Related DC Auxiliary Power Systems for Nuclear Power Generating StationsGuidance for the design of the dc auxiliary power systems for nuclear and large fossil-fueled power generating stations is provided. The... Superseded Standard
946-1992 - Recommended Practice for the Design of DC Auxiliary Power Systems for Generating StationsGuidance for the design of the DC auxiliary power systems for nuclear and large fossil-fueled power generating stations is provided. The... Superseded Standard
946-2004 - Recommended Practice for the Design of DC Auxiliary Power Systems for Generating SystemsGuidance for the design of the dc auxiliary power systems for nuclear and non-nuclear power generating stations is provided by this recommended... Active Standard
951-1988 - Guide to the Assembly and Erection of Metal Transmission StructuresThe purpose of this standard is to present in one document, design and construction considerations for material delivery, assembly and erection of... Superseded Standard
951-1996 - Guide to the Assembly and Erection of Metal Transmission StructuresVarious good practices that will enable users to improve their ability to assemble and erect self-supporting and guyed steel or aluminum lattice... Active Standard
957-1987 - Guide for Cleaning InsulatorsThe purpose of the guide is to present pertinent information on the equipment needed and the methods that can be used in a safe and efficient... Superseded Standard
957-1995 - Guide for Cleaning InsulatorsIn this IEEE guide, procedures for cleaning contaminated electrical insulators (excluding nuclear, toxic, and hazardous chemical contaminants) of... Superseded Standard
957-2005 - Guide for Cleaning InsulatorsProcedures for cleaning contaminated electrical insulators (excluding nuclear, toxic, and hazardous chemical contaminants) of all types, using... Active Standard
958-2003 - Guide for Application of AC Adjustable-Speed Drives on 2400 to 13,800 Volt Auxiliary Systems in Electric Power Generating StationsA fundamental understanding of the operation, selection, and application of ac adjustable-speed drives on 2400 to 13 800 V auxiliary systems in... Withdrawn Standard
972-1985 - Trial-Use Connections of Insulated Aluminum ConductorsThis standard is intended to demonstrate with reasonable assurance that connections meeting these requirements will perform in a satisfactory... Withdrawn Standard
977-1991 - Guide to Installation of Foundations for Transmission Line StructuresVarious approaches to good construction practices that could improve the installation of transmission line structure foundations are presented.... Superseded Standard
977-2010 - Guide to Installation of Foundations for Transmission Line StructuresVarious approaches to good construction practices that could improve the installation of transmission line structure foundations are presented.... Active Standard
978-1984 - Guide for In-Service Maintenance and Electrical Testing of Live-Line ToolsThis guide provides recommendations for in-service inspection, maintenance, and electrical testing of live-line tools. These selected... Withdrawn Standard
979-1984 - Guide for Substation Fire Protection Substation fire-protection practices that generally have been accepted by the electric utility industry and existing fire- protection standards... Superseded Standard
979-1994 - Guide for Substation Fire ProtectionIn this IEEE standard guidance is provided to substation engineers in determining the design, equipment and practices deemed necessary for the... Superseded Standard
979-2012 - Guide for Substation Fire ProtectionGuidance is provided to substation engineers in determining the design, equipment, and practices deemed necessary for the fire protection of... Active Standard
980-1987 - Guide for Containment and Control of Oil Spills in SubstationsThe guide discusses the significance of federal oil spillage regulations and their applicability to substations; identifies the problem of oil... Superseded Standard
980-1994 - Guide for Containment and Control of Oil Spills in SubstationsIn this IEEE standard the significance of oil-spillage regulations and their applicability to electric supply substations are discussed: the... Superseded Standard
980-2013 - Guide for Containment and Control of Oil Spills in SubstationsThe significance of oil-spillage regulations and their applicability to electric supply substations are discussed; the sources of oil spills are... Active Standard
987-1985 - Guide for Application of Composite InsulatorsThe standard acts as a guide for the application of composite insulators to overhead transmission and distribution lines. It is based on utility... Withdrawn Standard
987-2001 - Guide for Application of Composite InsulatorsA guide to the application of composite insulators to overhead transmission and distribution lines is provided. It is based on utility field... Withdrawn Standard
998-1996 - Guide for Direct Lightning Stroke Shielding of SubstationsDesign information for the methods, historically and typically applied by substation designers to minimize direct lightning strokes to equipment... Superseded Standard
998-2012 - Guide for Direct Lightning Stroke Shielding of SubstationsDesign information for the methods historically and typically applied by substation designers to reduce direct lightning strokes to equipment and... Active Standard
999-1992 - Recommended Practice for Master/Remote Supervisory Control and Data Acquisition (SCADA) CommunicationsThe use of serial digital transmission by supervisory control and data acquisition (SCADA) systems having geographically dispersed terminals is... Withdrawn Standard
1001-1988 - Guide for Interfacing Dispersed Storage and Generation Facilities with Electric Utility SystemsThe purpose of this IEEE guide is to alert electric utilities, manufacturers of dispersed storage and generation (DSG) equipment, consultants,... Withdrawn Standard
1004-1987 - Standard Definitions of Planar Transmission LinesIt has been recognized that a standard was needed for planar transmission lines which are an important transmission medium in hybrid and... Withdrawn Standard
1010-1987 - Guide for Control of Hydroelectric Power PlantsDescribes the control and monitoring requirements for equipment and systems associated with conventional and pumped-storage hydroelectric plants.... Superseded Standard
1010-2006 - Guide for Control of Hydroelectric Power PlantsThis guide serves as a reference document for practicing engineers in the hydroelectric industry. It documents prevailing industry practices in... Active Standard