Standard Icon

Nuclear Power Standards

Displaying results 161 - 200 of 233
Standard Name
Status Help less all
1205-2000 - Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating StationsGuidelines for assessing, monitoring, and mitigating aging degradation effects on Class 1E equipment used in nuclear power generating stations are... Superseded Standard
1214-1992 - Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear SpectroscopyA standard format for data interchange used to transfer multichannel pulse height data on magnetic media between laboratories is provided. The... Active Standard
1289-1998 - Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating StationsSystem design considerations, information display and control techniques for use with computer-based displays, and human factors engineering... Active Standard
1290-1996 - Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating StationsMotors used to drive valve operators in nuclear power generating stations are discussed. Guidelines to evaluate the adequecy of motors used to... Active Standard
1431-2004 - Standard Specification Format Guide and Test Procedure for Coriolis Vibratory GyrosSpecification and test requirements for a single-axis Coriolis vibratory gyro (CVG) for use as a sensor in attitude control systems, angular... Active Standard
1554-2005 - Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and AnalysisTest equipment, data acquisition equipment, instrumentation, test facilities, and data analysis techniques used in inertial sensor testing are... Active Standard
1786-2011 - Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear FacilitiesThe application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this guide. Active Standard
11073-20601a-2010 - Personal health device communication Part 20601: Application profile--Optimized Exchange Protocol Amendment 1Issues found within IEEE Std 11073-20601-2008 while implementing the standard and/or testing and certifying products are addressed in this amendment. Active Standard
11073-30400-2010 - Point-of-care medical device communication Part 30400: Interface profile--Cabled EthernetThe application of the Ethernet family (IEEE Std 802.3-2008) of protocols for use in medical device communication is addressed in this document.... Active Standard
C37.2-1987 - Standard Electrical Power System Device Function NumbersThis standard applies tot he definition and application of function numbers for devices used in electrical substations and generating plants and... Superseded Standard
C37.2-1991 - Standard Electrical Power System Device Function NumbersA device function number, with an appropriate prefix and suffix where necessary, is used to identify the function of each device in all types of... Superseded Standard
C37.2-1996 - Standard Electrical Power System Device Function Numbers and Contact DesignationsThe definition and application of function numbers for devices used in electrical substations and generating plants and in installations of power... Superseded Standard
C37.2-2008 - Standard Electrical Power System Device Function Numbers, Acronyms, and Contact DesignationsThe definition and application of function numbers and acronyms for devices and functions used in electrical substations and generating plants and... Active Standard
C62.31-1987 - Standard Test Specification for Gas-Tube Surge Protective DevicesSuperseded. Gas-tube surge-protective devices for application on systems with voltages 1000 V rms or 1200 V dc are covered. These protective... Superseded Standard
C62.31-2006 - Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device ComponentsThis standard applies to gas-tube surge-protective devices for application on systems with voltages, 1000 V rms or 1200 V dc. Active Standard
C95.2-1982 - American National Standard Radio Frequency Radiation Hazard Warning SymbolThis standard provides preferred voltage ratings above 230 kV nominal for alternating current systems and equipment. Superseded Standard
C95.2-1999 - Radio-Frequency Energy and Current-Flow SymbolsSymbols to inform people about the presence of potentially hazardous levels of radiofrequency energy or the presence of contact current hazards in... Active Standard
N42.4-1971 - American National High Voltage Connectors for Nuclear InstrumentsThis standard provides for interchangeability of safe high voltage connectors in nuclear instrument applications. This standard is applicable to... Withdrawn Standard
N42.5-1965 - American National Bases for GM Counter TubesThis document contains two standards. ANSI N42.5 specifies bases for Geiger-Mueller counter tubes. ANSI N42.6 specifies interrelating mechanical... Active Standard
N42.6-1980 - American National Standard Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter ChargersThe purpose of this standard is to specify interrelating mechanical and electrical properties so that quartz-fiber exposure meters may be used... Active Standard
N42.12-1994 - American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of RadionuclidesMethods for performance testing, calibration, and usage of NaI(T1) detector systems for the measurement of gamma ray emission rates of... Active Standard
N42.12-1980 - American National Standard Calibration and Usage of Sodium Iodide Detector SystemsThis standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma... Superseded Standard
N42.13-1986 - American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of RadionuclidesThe wide range of calibrator-type instruments currently being used primarily for radionuclide assay in nuclear medicine indicates the need for a... Active Standard
N42.14-1978 - American National Standard Calibration and Usage of Germanium Detectors for Measurement of Gamma-Ray Emission of RadionuclidesThis standard establishes methods for calibration and usage of germanium detectors for the measurement of gamma-ray emission rates of... Superseded Standard
N42.14-1999 - American National Calibration and use of germanium spectrometers for the measurement of gamma-ray emission rates of radionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.14-1991 - American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of RadionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.15-1980 - American National Standard Performance Verification of Liquid-Scintillation Counting SystemThe purpose of this standard is to provide the user with a means of verifying the performance of typical liquid-scintillation counting systems.... Superseded Standard
N42.15-1990 - Performance Verification of Liquid-Scintillation Counting Systems, American National StandardProvides designers and users with tests and procedures to assure that a liquid-scintillation counting system is producing reliable data. This... Superseded Standard
N42.15-1997 - American National Standard Check Sources for and Verification of Liquid-Scintillation Counting SystemsTests and procedures to ensure that a liquid-scintillation counting system is producing reliable data are provided for designers and users. This... Active Standard
N42.16-1986 - American National Standard Specifications for Sealed Radioactive Check Sources Used in Liquid-Scintillation CountersThe liquid-scintillation counter measures activity of radionuclides from the rate of light photons emitted by a liquid sample. The total light... Superseded Standard
N42.17A-1989 - American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions Minimum acceptable performance criteria for health physics instrumentation for use in ionizing radiation fields are established. Included are... Superseded Standard
N42.17B-1989 - Performance Specifications for Health Physics Instrumentation - Occupational Airborne Radioactivity Monitoring Instrumentation, American National StandardThe standard describes the minimum acceptable performance criteria for instrumentation used to monitor occupational exposure to airborne... Active Standard
N42.17C-1989 - Performance Specifications for Health Physics Instrumentation--Portable Instrumentation for Use in Extreme Environmental Conditions, American National StandardANSI N42.17C-1989 describes the minimum acceptable performance criteria for health physics instrumentation for use under extreme environmental... Active Standard
N42.17A-2003 - American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental ConditionsThis standard establishes the minimum performance criteria for health physics instrumentation for use in ionizing radiation fields. Testing... Active Standard
N42.18-1980 - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National StandardThis standard provides recommendations for the selection of instrumentation specific to the continuous monitoring and quantification of... Active Standard
N42.18-2004 - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in EffluentsThis standard provides recommendations for the selection of instrumentation specific to the continuous monitoring and quantification of... Active Standard
N42.20-1995 - ANSI Performance Criteria for Active Personnel Radiation MonitorsPerformance and design criteria are provided for monitors that are worn on the trunk of the body to measure the personal dose equivalent or the... Superseded Standard
N42.20-2003 - American Standard Performance Criteria for Active Personnel Radiation MonitorsPerformance and design criteria are provided in this standard for monitors that are worn on the trunk of the body to measure the personal dose... Active Standard
N42.22-1995 - American National Standard Traceability of Radioactive Sources to NIST and Associated Instrument Quality ControlA mechanism for manufacturers to establish traceability of radionuclide sources that are certified for radionuclide activity; concentration; or... Active Standard
Displaying results 161 - 200 of 233 - all results