Standard Icon

Nuclear Power Standards

Displaying results 81 - 120 of 220
Standard Name
Status Help less all
583-1982 - Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)The interface system on which this standard is based was developed by the ESONE Committee of European Laboratories with the collaboration of the... Active Standard
595-1982 - Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)The IEEE standard defines a serial highway interface system using byte-organized messages, and configured as a unidirectional loop to which are... Active Standard
596-1982 - Standard Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)The CAMAC parallel highway interface system for interconnecting up to seven CAMAC crates (or other devices) and a system controller is defined. In... Active Standard
603-1980 - Standard Criteria for Safety Systems for Nuclear Power Generating SystemsThe criteria contained in this standard establish minimum functional and design requirements for safety systems for nuclear power generating... Superseded Standard
603-1991 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsThis standard establishes minimum functional design criteria for the power, instrumentation, and control portions of nuclear power generating... Superseded Standard
603-1998 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsMinimum functional and design criteria for the power, instrumentation, and control portions of nuclear power generating station safety systems are... Superseded Standard
603-2009 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsMinimum functional and design criteria for the power, instrumentation, and control portions of nuclear power generating station safety systems are... Active Standard
622-1987 - Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating SystemsThis document provides recommended practices for designing and installing electric heat tracing systems in nuclear power generating stations.... Active Standard
622B-1988 - Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating StationsThis IEEE recommended practice provides recommendations for the testing and start-up of electric heat tracing systems in power generating stations... Withdrawn Standard
627-1980 - Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating StationsIt is required that safety systems equipment in nuclear power generating stations meet or exceed its performance requirements throughout its... Withdrawn Standard
627-2010 - Qualification of Equipment Used in Nuclear FacilitiesGuidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facilities is... Active Standard
628-1987 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsThe standard provides criteria for the minimum requirements in the selection, design, installation and qualification of raceway systems for Class... Superseded Standard
628-2001 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsCriteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits for... Superseded Standard
628-2011 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsCriteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits for... Active Standard
649-1980 - Qualilfying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe manufacturers and users of Class 1E motor control centers are required to provide assurance that such equipment will meet or exceed its... Superseded Standard
649-1991 - Qualifying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in... Superseded Standard
649-2006 - Qualifying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in... Active Standard
650-1979 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsThis standard describes methods for qualifying static battery chargers and inverters for Class 1E installations in environmentally controlled... Superseded Standard
650-1990 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power... Superseded Standard
650-2006 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations outside containment in nuclear power generating stations... Active Standard
662-1992 - Standard Terminology for Semiconductor MemoryGuidelines under which data sheets for new semiconductor memories are to be generated are provided. Adherence to these guidelines is intended to... Withdrawn Standard
675-1982 - Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)This IEEE standard defines a method for incorporating more than one source of control into a CAMAC crate. The standard fully conforms to the... Active Standard
683-1976 - Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms can satisfy... Active Standard
690-1984 - the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating StationsDirection for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating... Superseded Standard
690-2004 - the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating StationsDirection for the design and installation of safety related electrical cable systems, including associated circuits, in nuclear power generating... Active Standard
692-1986 - Standard Criteria for Security Systems for Nuclear Power Generating StationsA complete nuclear power generating station security program consists of security personnel, barriers, security and contingency plans, procedures,... Superseded Standard
692-1997 - Standard Criteria for Security Systems for Nuclear Power Generating StationsIn this IEEE Standard, criteria are provided for the design of an integrated security system for nuclear power generating stations. Requirements... Superseded Standard
692-2010 - Standard Criteria for Security Systems for Nuclear Power Generating StationsThe standard provides criteria for the design, testing, and maintenance of security system equipment for nuclear power generating stations. Such... Superseded Standard
692-2013 - Criteria for Security Systems for Nuclear Power Generating StationsCriteria for the design of an integrated security system for nuclear power generating stations are provided in this standard. Requirements are... Active Standard
726-1982 - Standard Real-Time BASIC for CAMAC (Computer Automated Measurement and Control)Real-time BASIC for CAMAC is ANSI standard real-time BASIC in which the declarations and real-time statements are defined for use with CAMAC... Active Standard
741-1986 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsThis document prescribes criteria that establish protection requirements for Class 1E power systems and equipment. It describes the purpose of and... Superseded Standard
741-1990 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsCriteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and the means for... Superseded Standard
741-1997 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsIn this IEEE Standard, criteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and... Superseded Standard
741-2007 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsCriteria that establish protection requirements for Class 1E power systems and equipment are prescribed in this standard. The purpose of and the... Active Standard
749-1983 - Standard Periodic Testing of Diesel-Generator Units Applied as Standby Power Supplies in Nuclear Power Generating StationsWithdrawn Date: Dec 05, 1991. This standard applies to the periodic testing of diesel-generator units applied as standby power supplies in nuclear... Withdrawn Standard
758-1979 - Standard Subroutines for Computer Automated Measurement and Control (CAMAC)This IEEE standard presents a recommended set of software subroutines for use with the CAMAC modular instrumentation and interface system of IEEE... Active Standard
759-1984 - Standard Test Procedures for Semiconductor X-Ray Energy SpectrometersAdministratively Withdrawn January 2007. Test procedures for X-ray spectrometers consisting of a semiconductor radiation detector assembly and... Withdrawn Standard
765-1983 - Preferred Power Supply for Nuclear Power Generating StationsThe design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and... Superseded Standard
765-1995 - Preferred Power Supply (PPS) for Nuclear Power Generating StationsIn this IEEE Standard, the design criteria of the prefered power supply (PPS) and its interfaces with the Class 1E power system, switchyard,... Superseded Standard
Displaying results 81 - 120 of 220 - all results