Project Icon

Nuclear Power Standards

Displaying results 41 - 80 of 137
1 2 3 4
Nuclear Power Standards
Status Help
583-1982 - IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)This standard is intended to serve as a basis for a range of modular instrumentation capable of interfacing transducers and other device ... active Standard
583A-1979 - IEEE Supplement to CAMAC IEEE Standards DocumentsIn this supplement, reference is made to page numbers in the IEEE Standards and Department of Energy (DOE) reports. In general, these pa ... withdrawn Standard
595-1982 - IEEE Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)A serial highway (SH) system using byte-organized messages and configured as a unidirectional loop, to which are connected a system cont ... active Standard
596-1982 - IEEE Standard Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)The CAMAC parallel highway interface system for interconnecting up to seven CAMAC crates (or other devices) and a system controller is d ... active Standard
600-1983 - IEEE Trial-Use Standard Requirements for Organizations that Conduct Qualification Testing of Safety Systems Equipment for Use in Nuclear Power Generating StationsThis standard applies to organizations that conduct qualification tests on equipment that has a definable safety function and is an iden ... withdrawn Standard
603-2009 - IEEE Standard Criteria for Safety Systems for Nuclear Power Generating StationsMinimum functional and design criteria for the power, instrumentation, and control portions of nuclear power generating station safety s ... active Standard
627-1980 - IEEE Standard for Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating StationsBasic principles for design qualification of safety systems equipment used in nuclear power generating stations are provided. Specificat ... withdrawn Standard
627-2010 - IEEE Standard for Qualification of Equipment Used in Nuclear FacilitiesGuidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facil ... active Standard
628-2011 - IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsCriteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits ... active Standard
649-2006 - IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applic ... active Standard
650-2017 - IEEE Approved Draft Standard for Qualification of Class 1E Static Battery Chargers, Inverters and Uninterruptible Power Supply (UPS) Systems for Nuclear Power Generating StationsMethods for qualifying static battery chargers, inverters uninterruptible power supply (UPS) systems for Class 1E installations outside ... active Standard
675-1982 - IEEE Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)A method for incorporating more than one source of control into a CAMAC crate is defined. The aim is to provide for the use of auxiliary ... active Standard
680-1978 - IEEE Standard Techniques for Determination of Germanium Semiconductor Detector Gamma-Ray Efficiency Using a Standard Marinelli (Reentrant) Beaker GeometryThis standard for determination of gamma-ray efficiencies of germanium semiconductor detectors was developed in recognition of the incre ... withdrawn Standard
683-1976 - IEEE Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)The recommended block-transfer algorithms are discussed, and those given in the basic CAMAC specification are described. These algorithm ... active Standard
690-2004 - IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating StationsDirection for the design and installation of safety related electrical cable systems, including associated circuits, in nuclear power ge ... active Standard
692-2013 - IEEE Standard for Criteria for Security Systems for Nuclear Power Generating StationsCriteria for the design of an integrated security system for nuclear power generating stations are provided in this standard. Requiremen ... active Standard
726-1982 - IEEE Standard Real-Time BASIC for CAMACThis standard defines ANSI Standard Real-Time BASIC, in which the declarations and real-time statements are defined for use with CAMAC h ... active Standard
741-2017 - IEEE Standard for Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsCriteria that establish protection requirements for Class 1E power systems and equipment are prescribed in this standard. The purpose of ... active Standard
749-1983 - IEEE Standard Periodic Testing of Diesel-Generator Units Applied as Standby Power Supplies in Nuclear Power Generating StationsWithdrawn Date: Dec 05, 1991. This standard applies to the periodic testing of diesel-generator units applied as standby power supplies ... withdrawn Standard
758-1979 - IEEE Standard Subroutines for Computer Automated Measurement and Control (CAMAC)A set of standard subroutines that provide access to CAMAC facilities in a variety of computer programming languages is described. The s ... active Standard
759-1984 - IEEE Standard Test Procedures for Semiconductor X-Ray Energy SpectrometersTest procedures for X-ray spectrometers consisting of a semiconductor radiation detector assembly and signal processing electronics inte ... withdrawn Standard
765-2012 - IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission syst ... active Standard
805-1984 - IEEE Recommended Practice for System Identification in Nuclear Power Plants and Related FacilitiesThis recommended practice provides a single source of nuclear power plant system descriptions that, along with related recommended pract ... withdrawn Standard
933-2013 - IEEE Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear FacilitiesGuidelines for the definition of a reliability program at nuclear generating stations and other nuclear facilities are provided. The doc ... active Standard
934-1987 - IEEE Standard Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating StationsBasic requirements for the selection and utilization of replacement parts for Class 1E equipment in nuclear power generating stations, i ... withdrawn Standard
960/1177-1993 - IEEE Standard FASTBUS Modular High-Speed Data Acquisition and Control System and IEEE FASTBUS Standard RoutinesMechanical, signal electrical, and protocol specifications are given for a modular data bus system, which, while allowing equipment desi ... active Standard
1023-2004 - IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear FacilitiesThis document provides recommended practices for applying human factors engineering (HFE) to systems and equipment that have significant ... active Standard
1033-1985 - IEEE Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating StationsThis document provides the recommended practice for application of ANSI/IEEE Std 828-1983, IEEE Standard for Software Configuration Mana ... withdrawn Standard
1082-2017 - IEEE Approved Draft Guide for Incorporating Human Reliability Analysis into Probabilistic Risk Assessments for Nuclear Power Generating Stations and other Nuclear FacilitiesThis guide provides a structured framework for the incorporation of human reliability analysis (HRA) into probabilistic risk assessments ... active Standard
1131-1987 - IEEE Standard Cryostat End-Cap Dimensions for Germanium Semiconductor Gamma-Ray SpectrometersWithdrawn Standard. Withdrawn Date: Sep 15, 1993. No longer endorsed by the IEEE. This standard establishes fixed dimensions for end-ca ... withdrawn Standard
1160-1993 - IEEE Standard Test Procedures for High-Purity Germanium Crystals for Radiation DetectorsThis standard applies to the measurement of bulk properties of high-purity germanium as they relate to fabrication and performance of ge ... active Standard
1205-2014 - IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear FacilitiesGuidelines for assessing, monitoring, and mitigating aging degradation effects on electrical equipment used in nuclear power generating ... active Standard
1214-1992 - IEEE Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear SpectroscopyA standard format for data interchange used to transfer pulse height data on magnetic media between laboratories is provided. The terms ... active Standard
1290-2015 - IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating StationsMotors used to drive valve operators in nuclear power-generating stations are discussed. Guidelines to evaluate the adequacy of motors u ... active Standard
1431-2004 - IEEE Standard Specification Format Guide and Test Procedure for Coriolis Vibratory GyrosSpecification and test requirements for a single-axis Coriolis vibratory gyro (CVG) for use as a sensor in attitude control systems, ang ... active Standard
1682-2011 - IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating StationsThis standard provides general requirements, directions, and methods for qualifying fiber optic cables, connections, and optical fiber s ... active Standard
1707-2015 - IEEE Recommended Practice for the Investigation of Events at Nuclear FacilitiesCommon terminology and recommended practices for initiating and conducting event investigations, analyzing data, producing results, and ... active Standard
1786-2011 - IEEE Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear FacilitiesThe application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this ... active Standard
1792-2017 - IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply ReliabilityActivities related to preferred power supply (PPS) reliability, including design considerations, analytical studies, operational and mai ... active Standard