Project Icon

Nuclear Power Standards

Displaying results 1 - 40 of 136
1 2 3 4
Nuclear Power Standards
StatusHelp
7-4.3.2-1982 - American National Standard Application Criteria for Programmable Digital Computer Systems in Safety Systems of Nuclear Power Generating StationsThis standard establishes application criteria for programmable digital computer systems in safety systems of nuclear power generating s ... withdrawn Standard
7-4.3.2-2016 - IEEE Standard Criteria for Programmable Digital Devices in Safety Systems of Nuclear Power Generating StationsAdditional specific requirements to supplement the criteria and requirements of IEEE Std 603(TM) are specified for programmable digital ... active Standard
159-1952 - IEEE Standards on Gas-Filled Radiation Counter Tubes: Methods of Testing, 1952In setting up test procedures for radiation counter tubes, it is necessary to consider not only the test circuits but also the physical ... withdrawn Standard
175-1960 - IRE Standards on Nuclear Techniques: Definitions for the Scintillation Counter Field, 1960Reprinted from the proceedings of the I.R.E Vol. 48, NO.8 August 1960 withdrawn Standard
278 -1967 - IEEE Guide for Classifying Electrical Insulating Materials Exposed to Neutron and Gamma RadiationThe purpose of this Guide is to classify the environmental conditions of gamma radiation, neutron flux, and temperature in which electri ... withdrawn Standard
279-1971 - IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating StationsThese criteria established minimum requirements for the safety-related functional performance and reliability of protection systems for ... withdrawn Standard
300-1988 - IEEE Standard Test Procedures for Semiconductor Charged-Particle DetectorsThis standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged p ... active Standard
301-1988 - IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing RadiationProcedures are given for testing amplifier and preamplifier systems with linear pulse-shaping networks for use with semiconductor, scint ... active Standard
308-2012 - IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of ac and dc power systems and I&C power systems in single-unit and multiunit nuclear power generating stations are co ... active Standard
309/N42.3-1999 - IEEE Standard Test Procedures and Bases for Geiger-Mueller CountersTest procedures for Geiger-Mueller counters that are used for the detection of ionizing radiation are presented so that they have the sa ... active Standard
317-2013 - IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating StationsAn electric penetration assembly is an assembly of insulated electric conductors, conductor seals, module seals (if any), and aperture s ... active Standard
325-1986 - IEEE Standard Test Procedures for Germanium Gamma-Ray DetectorsTerminology and standard test procedures for germanium radiation detectors that are used for the detection and high-resolution spectrome ... withdrawn Standard
325-1996 - IEEE Standard Test Procedures for Germanium Gamma-Ray DetectorsTerminology and standard test procedures are established for germanium gamma-ray detectors that are used for the detection and high-reso ... active Standard
334-2006 - IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating StationsReaffirmed March 2012. It is required that Class 1E motors, with their interfaces, meet or exceed the specified performance requirements ... active Standard
338-2012 - IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station SafetyThe standard provides criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems. ... active Standard
344-2013 - IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating StationsPractices are provided for establishing procedures that will yield data to demonstrate that the equipment can meet its performance requi ... active Standard
352-2016 - IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Systems and Other Nuclear FacilitiesGeneral reliability and availability analysis methods that can be applied to structures, systems, and components (SSCs) in nuclear power ... active Standard
379-2014 - IEEE Standard for Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety SystemsRequirements for the application of the single-failure criterion to the electrical power, instrumentation, and control portions of nucle ... active Standard
380-1975 - IEEE Definitions of Terms Used in IEEE Standards on Nuclear Power Generating StationsAll of the terms and definitions in this document have been taken from current IEEE standards on nuclear power generating stations. The ... withdrawn Standard
381-1977 - IEEE Standard Criteria for Type Tests of Class 1E Modules Used in Nuclear Power Generating StationsMinimum requirements for, and guidance regarding, the methods and procedures for qualification of power-driven valve actuators with safe ... withdrawn Standard
382-2006 - IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating StationsRevision of IEEE Std 382-1996 Direction for the implementation of the requirements of IEEE Std 323TM-2003 as they apply to the specifi ... active Standard
383-2015 - IEEE Standard for Qualifying Electric Cables and Splices for Nuclear FacilitiesGeneral requirements and methods for qualifying electric cables and splices for nuclear facilities are provided. Cable, wire, and splice ... active Standard
384-1981 - IEEE Standard Criteria for Independence of Class 1E Equipment and CircuitsThis standard provides criteria and requirements for establishing and maintaining the independence of Class IE equipment and circuits an ... withdrawn Standard
384-2018 - IEEE Approved Draft Standard Criteria for Independence of Class 1E Equipment and CircuitsThe independence requirements of the circuits and equipment comprising or associated with Class 1E systems are described. Criteria for t ... active Standard
387-2017 - IEEE Standard for Criteria for Diesel Generator Units Applied as Standby Power Supplies for Nuclear Power Generating StationsThe criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating st ... active Standard
398-1972 - IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting FieldTests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cer ... active Standard
415-1986 - IEEE Guide for Planning of Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating StationsDirections for establishing an acceptable pre-operational testing program for Class 1E power systems in nuclear power generating station ... withdrawn Standard
420-2013 - IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class 1E control boards, panels, and racks and establishes the m ... active Standard
467-1980 - IEEE Standard Quality Assurance Program Requirements for the Design and Manufacture of Class 1E Instrumentation and Electric Equipment for Nuclear Power Generating StationsThis standard establishes the basic Quality Assurance Program requirements to be implemented by manufacturers of Class 1E Instrumentatio ... withdrawn Standard
494-1974 - IEEE Standard Method for Identification of Documents Related to Class 1E Equipment and Systems for Nuclear Power Generating StationsCriteria for the uniform identification of documents significant to design, construction, testing, operation, and maintenance of Class 1 ... withdrawn Standard
497-1981 - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsCriteria for variable selection, performance, design, and qualification of accident monitoring instrumentation are established in this s ... withdrawn Standard
497-2016 - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsEstablished in this standard are criteria for variable selection, performance, design, and qualification of accident monitoring instrume ... active Standard
498-1990 - IEEE Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear FacilitiesWithdrawn Standard. Withdrawn Date: Jun 14, 1995. No longer endorsed by the IEEE. The standard sets forth the requirements for a calib ... withdrawn Standard
500-1984 - IEEE Guide To The Collection And Presentation Of Electrical, Electronic, Sensing Component, And Mechanical Equipment Reliability Data for Nuclear-Power Generating StationsA method of collecting and presenting reliability data for use in nuclear power generating station reliability calculations is establish ... withdrawn Standard
500PV-1984 - IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves (Excerpted from ANSI/IEEE Std 500-1984)A method of collecting and presenting reliability data for use in nuclear power generating station reliability calculations is establish ... withdrawn Standard
535-2013 - IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating StationsQualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary ... active Standard
567-1980 - IEEE Trial-Use Standard Criteria for the Design of the Control Room Complex for a Nuclear Power Generating StationThis standard addresses the central control room of nuclear power generating station and the overall complex in which this room is house ... withdrawn Standard
572-2006 - IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating StationsThe basic requirements for qualifying Class 1E Connection Assemblies and interfaces that are to be used in nuclear power generating stat ... active Standard
577-2012 - IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating StationsThe minimum acceptable requirements for the performance of reliability analyses for safety systems when used to address the reliability ... active Standard