Standard Icon

Nuclear Power Standards

Standard Name
Status Help less all
7-4.3.2-1993 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-1991 are specified. Within the context of... Superseded Standard
7-4.3.2-2003 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603TM - 1998 are specified. Within the context... Superseded Standard
7-4.3.2-2010 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-2009 are specified. Within the context of... Active Standard
175-1960 - IRE Standards on Nuclear Techniques: Definitions for the Scintillation Counter Field, 1960Reprinted from the proceedings of the I.R.E Vol. 48, NO.8 August 1960 Withdrawn Standard
300-1988 - Standard Test Procedures for Semiconductor Charged-Particle DetectorsThis standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged particles.... Active Standard
301-1988 - Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing RadiationThis standard describes test procedures for amplifiers and preamplifiers that are used with semiconductor, scintillation, and proportional... Active Standard
308-1971 - Standard Criteria for Class IE Electric Systems for Nuclear Power Generating StationsThis standard applies to those parts of the electric systems in stationery single-unit and multi-unit land-based nuclear power generating stations... Superseded Standard
308-1974 - Standard Criteria for Class IE Power Systems for Nuclear Power Generating StationsThis standard applies to the electric systems in stationary single-unit and multi-unit nuclear power generating stations that provide electric... Superseded Standard
308-1980 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsThis standard applies to the Class 1E portions of the following systems and equipment in single unit and multi-unit nuclear power generating... Superseded Standard
308-1991 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of Ac and Dc power systems and instrumentation and control power systems in single-unit and multiunit nuclear power generating... Superseded Standard
308-2001 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of alternating current and direct current power systems and instrumentation and control power systems in single-unit and... Superseded Standard
308-2012 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of ac and dc power systems and I&C power systems in single-unit and multiunit nuclear power generating stations are covered... Active Standard
309-1970 - Standard Test Procedure for Geiger-Müller CountersThis publication presents standard test procedures for Geiger-Muller counter radiation detectors. These detectors, originally announced by ?Geiger... Superseded Standard
309/N42.3-1999 - Standard Test Procedures and Bases for Geiger-Mueller CountersTest procedures for Geiger-Mueller counters that are used for the detection of ionizing radiation are presented so that they have the same meaning... Active Standard
317-1983 - Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating StationsAn electric penetration assembly is an assembly of insulated electric conductors, conductor seals, module seals (if any), and aperture seals that... Superseded Standard
317-2013 - Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating StationsAn electric penetration assembly is an assembly of insulated electric conductors, conductor seals, module seals (if any), and aperture seals that... Active Standard
323-1971 - Trial-Use Standard: General Guide for Qualifying Class I Electric Equipment for Nuclear Power Generating StationsThis document describes the basic requirements for the qualification of Class I electric equipment. This is equipment which is essential to the... Superseded Standard
323-1983 - Qualifying Class 1E Equipment for Nuclear Power Generating StationsDescribes the basic requirement for qualifying Class 1E equipment with interfaces that are to be used in nuclear power generating stations. The... Superseded Standard
323-2003 - Qualifying Class 1E Equipment for Nuclear Power Generating StationsThe basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in... Active Standard
325-1986 - Standard Test Procedures for Germanium Gamma-Ray DetectorsThe object of this standard is to establish standard test procedures for germanium gamma-ray detectors so that measurements have the same meaning... Withdrawn Standard
325-1996 - Standard Test Procedures for Germanium Gamma-Ray DetectorsTerminology and standard test procedures for germanium radiation detectors that are used for the detection and high-resolution spectrometry of... Active Standard
334-1974 - Type Tests of Continuous Duty Class 1E Motors for Nuclear Power Generating StationsSuperseded. Methods and requirements for qualifying continuous duty Class 1E motors for use in nuclear power generating stations are provided. The... Superseded Standard
334-1994 - Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating StationsMethods and requirements for qualifying continuous duty Class 1E motors for use in nuclear power generating stations are provided. The methods are... Superseded Standard
334-2006 - Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating StationsIt is required that Class 1E motors, with their interfaces, meet or exceed the specified performance requirements throughout their service life.... Active Standard
336-1985 - Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis standard sets forth the requirements for installation, inspection, and testing of power, instrumentation, and control equipment and systems... Superseded Standard
336-2005 - Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis guide provides considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control... Superseded Standard
336-2010 - Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesConsiderations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and... Active Standard
338-1987 - Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety SystemsThis standard provides design and operational criteria for the performance of periodic testing as part of the surveillance program of nuclear... Superseded Standard
338-2006 - Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety SystemsThe standard provides criteria for the performance of periodic testing of nuclear power generating station safety systems. The scope of periodic... Superseded Standard
338-2012 - Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station SafetyThe standard provides criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems. The scope... Active Standard
344-1971 - Trial-Use Guide for Seismic Qualification of Class I Electric Equipment for Nuclear Power Generating StationsThis guide provides direction for establishing procedures that will yield data which verify that the Class I electric equipment can meet its... Superseded Standard
344-1975 - Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating StationsThese recommended practices provide direction for establishing procedures that will yield data which verify that the class 1E equipment can meet... Superseded Standard
344-1987 - Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating StationsClass 1E equipment for nuclear power generating stations has to be safe in case of seismic activity. The recommended practice presents the... Superseded Standard
344-2004 - Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating StationsRecommended practices are provided for establishing procedures that will yield data to demonstrate that the Class 1E equipment can meet its... Superseded Standard
344-2013 - Seismic Qualification of Equipment for Nuclear Power Generating StationsPractices are provided for establishing procedures that will yield data to demonstrate that the equipment can meet its performance requirements... Active Standard
352-1987 - Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety SystemsThe standard provides the user with basic principles needed to conduct a reliability analysis of safety systems for nuclear power generating... Active Standard
379-1988 - Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety SystemsThe document covers the application of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear... Superseded Standard
379-1994 - Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety SystemsThe application of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear power generating station... Superseded Standard
379-2000 - Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety SystemsApplication of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear power generating safety... Superseded Standard
379-2014 - Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety SystemsRequirements for the application of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear power... Active Standard
381-1977 - Standard Criteria for Type Tests of Class 1E Modules Used in Nuclear Power Generating StationsThis document describes the basic requirements of a type test program with the objective of verifying that a module used as Class 1E equipment in... Withdrawn Standard
382-1985 - Qualification of Actuators for Power Operated Valve Assemblies with Safety-Related Functions for Nuclear Power PlantsThis standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions... Superseded Standard
382-1996 - Qualification of Actuators for Power-Operated Valve Assemblies With Safety-Related Functions for Nuclear Power PlantsIn this IEEE standard the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in... Superseded Standard
382-2006 - Qualification of Safety-Related Actuators for Nuclear Power Generating StationsDirection for the implementation of the requirements of IEEE Std 323trade-2003 as they apply to the specific features of safety-related actuator... Active Standard
383-1974 - Type Test of Class 1E Electric Cables, Field Splices, and Connections for Nuclear Power Generating StationsThis standard provides direction for establishing type tests which may be used in qualifying Class IE electric cables, field splices and other... Superseded Standard
383-2003 - Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating StationsThis standard provides general requirements, direction, and methods for qualifying Class 1E electric cables, field splices, factory splices, and... Active Standard
384-1992 - Standard Criteria for Independence of Class 1E Equipment and CircuitsThe independence requirements of the circuits and equipment comprising or associated with Class 1E systems are described in this standard.... Superseded Standard
384-2008 - Standard Criteria for Independence of Class 1E Equipment and CircuitsThe independence requirements of the circuits and equipment comprising or associated with Class 1E systems are described. Criteria for the... Active Standard
387-1984 - Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating StationsThe criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating stations is... Withdrawn Standard
387-1995 - Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating StationsThe criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating stations is... Active Standard
398-1972 - Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting FieldPhotomultipliers are used extensively in scintillation counting for the detection and analysis of ionizing radiation. the utilization of these... Active Standard
415-1986 - Guide for Planning of Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating StationsThis guide provides guidance for the planning of preoperational test programs for Class 1E power systems for nuclear power generating stations.... Withdrawn Standard
420-1982 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsDesign requirements that are unique to Class 1E control boards, panels, and racks are specified. Standards for qualification tests to verify that... Superseded Standard
420-2001 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class control boards, panels, and racks and establishes the methods to... Superseded Standard
420-2013 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class 1E control boards, panels, and racks and establishes the methods to... Active Standard
484-1987 - Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and SubstationsProvides recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly and... Superseded Standard
484-1996 - Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary ApplicationsIn this IEEE Standard recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly,... Superseded Standard
484-2002 - Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary ApplicationsRecommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly, and charging of... Active Standard
485-1983 - Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and SubstationsMethods for defining the dc load in a generating station or a substation and for sizing a lead storage battery to supply that load are described.... Superseded Standard
485-1997 - Recommended Practice for Sizing Lead-Acid Batteries for Stationary ApplicationsMethods for defining the DC load and for sizing a lead-acid battery to supply that load for stationary battery applications in full float... Superseded Standard
485-2010 - Recommended Practice for Sizing Lead-Acid Batteries for Stationary ApplicationsMethods for defining the direct current (dc) load and for sizing a lead-acid battery to supply that load for stationary battery applications in... Active Standard
494-1974 - Standard Method for Identification of Documents Related to Class 1E Equipment and Systems for Nuclear Power Generating StationsThis IEEE standard establishes criteria for the uniform identification of documents significant to design, construction, testing, operation, and... Withdrawn Standard
497-1981 - Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsThis IEEE standard applies to the design of instrumentation provided for the control room operator to monitor variables required to determine... Withdrawn Standard
497-2002 - Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsCriteria for variable selection, performance, design, and qualification of accident monitoring instrumentation are established in this standard.... Superseded Standard
497-2010 - Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsCriteria are established in this standard for variable selection, performance, design, and qualification of accident monitoring instrumentation,... Active Standard
498-1985 - Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear FacilitiesThis standard sets forth the requirements for a calibration program to control and verify the accuracy of measuring and test equipment used to... Superseded Standard
498-1990 - Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear FacilitiesThe standard sets forth the requirements for a calibration program to control and verify the accuracy of measuring and test equipment used to... Withdrawn Standard
500-1984 - Guide To The Collection And Presentation Of Electrical, Electronic, Sensing Component, And Mechanical Equipment Reliability Data for Nuclear-Power Generating StationsA method of collecting and presenting reliability data for use in nuclear power generating station reliability calculations is established. It... Withdrawn Standard
535-1986 - Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating StationsThe objective of qualification is to demonstrate that the batteries and racks, as installed, will perform their required Class 1E function... Superseded Standard
535-2006 - Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating StationsQualification methods for class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary... Superseded Standard
535-2013 - Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating StationsQualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary... Active Standard
567-1980 - Trial-Use Standard Criteria for the Design of the Control Room Complex for a Nuclear Power Generating StationThis standard addresses the central control room of a nuclear power generating station and the overall complex in which this room is housed. The... Withdrawn Standard
572-1985 - Qualification of Class 1E Connection Assemblies for Nuclear Power Generating StationsThis standard provides general requirements, direction, and methods for qualifying Class 1E connection assemblies for service in nuclear power... Superseded Standard
572-2006 - Qualification of Class 1E Connection Assemblies for Nuclear Power Generating StationsThis standard provides basic requirements, direction, and methods for qualifying class IE connection assemblies for service in nuclear power... Active Standard
577-1976 - Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating StationsThe purpose of this standard is to provide uniform, minimum acceptable requirements for the performance of reliability analyses for safety-related... Superseded Standard
577-2004 - Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear FacilitiesThis standard sets forth minimum acceptable requisites for the performance of reliability analyses for safety-related systems of nuclear... Superseded Standard
577-2012 - Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating StationsThe minimum acceptable requirements for the performance of reliability analyses for safety systems when used to address the reliability... Active Standard
583-1982 - Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)The interface system on which this standard is based was developed by the ESONE Committee of European Laboratories with the collaboration of the... Active Standard
595-1982 - Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)The IEEE standard defines a serial highway interface system using byte-organized messages, and configured as a unidirectional loop to which are... Active Standard
596-1982 - Standard Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)The CAMAC parallel highway interface system for interconnecting up to seven CAMAC crates (or other devices) and a system controller is defined. In... Active Standard
603-1980 - Standard Criteria for Safety Systems for Nuclear Power Generating SystemsThe criteria contained in this standard establish minimum functional and design requirements for safety systems for nuclear power generating... Superseded Standard
603-1991 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsThis standard establishes minimum functional design criteria for the power, instrumentation, and control portions of nuclear power generating... Superseded Standard
603-1998 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsMinimum functional and design criteria for the power, instrumentation, and control portions of nuclear power generating station safety systems are... Superseded Standard
603-2009 - Standard Criteria for Safety Systems for Nuclear Power Generating StationsMinimum functional and design criteria for the power, instrumentation, and control portions of nuclear power generating station safety systems are... Active Standard
622-1987 - Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating SystemsThis document provides recommended practices for designing and installing electric heat tracing systems in nuclear power generating stations.... Active Standard
622B-1988 - Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating StationsThis IEEE recommended practice provides recommendations for the testing and start-up of electric heat tracing systems in power generating stations... Withdrawn Standard
627-1980 - Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating StationsIt is required that safety systems equipment in nuclear power generating stations meet or exceed its performance requirements throughout its... Withdrawn Standard
627-2010 - Qualification of Equipment Used in Nuclear FacilitiesGuidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facilities is... Active Standard
628-1987 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsThe standard provides criteria for the minimum requirements in the selection, design, installation and qualification of raceway systems for Class... Superseded Standard
628-2001 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsCriteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits for... Superseded Standard
628-2011 - Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating StationsCriteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits for... Active Standard
649-1980 - Qualilfying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe manufacturers and users of Class 1E motor control centers are required to provide assurance that such equipment will meet or exceed its... Superseded Standard
649-1991 - Qualifying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in... Superseded Standard
649-2006 - Qualifying Class 1E Motor Control Centers for Nuclear Power Generating StationsThe basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in... Active Standard
650-1979 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsThis standard describes methods for qualifying static battery chargers and inverters for Class 1E installations in environmentally controlled... Superseded Standard
650-1990 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power... Superseded Standard
650-2006 - Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating StationsMethods for qualifying static battery chargers and inverters for Class 1E installations outside containment in nuclear power generating stations... Active Standard
662-1992 - Standard Terminology for Semiconductor MemoryGuidelines under which data sheets for new semiconductor memories are to be generated are provided. Adherence to these guidelines is intended to... Withdrawn Standard
675-1982 - Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)This IEEE standard defines a method for incorporating more than one source of control into a CAMAC crate. The standard fully conforms to the... Active Standard
683-1976 - Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms can satisfy... Active Standard
690-1984 - the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating StationsDirection for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating... Superseded Standard
690-2004 - the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating StationsDirection for the design and installation of safety related electrical cable systems, including associated circuits, in nuclear power generating... Active Standard
692-1986 - Standard Criteria for Security Systems for Nuclear Power Generating StationsA complete nuclear power generating station security program consists of security personnel, barriers, security and contingency plans, procedures,... Superseded Standard
692-1997 - Standard Criteria for Security Systems for Nuclear Power Generating StationsIn this IEEE Standard, criteria are provided for the design of an integrated security system for nuclear power generating stations. Requirements... Superseded Standard
692-2010 - Standard Criteria for Security Systems for Nuclear Power Generating StationsThe standard provides criteria for the design, testing, and maintenance of security system equipment for nuclear power generating stations. Such... Superseded Standard
692-2013 - Criteria for Security Systems for Nuclear Power Generating StationsCriteria for the design of an integrated security system for nuclear power generating stations are provided in this standard. Requirements are... Active Standard
726-1982 - Standard Real-Time BASIC for CAMAC (Computer Automated Measurement and Control)Real-time BASIC for CAMAC is ANSI standard real-time BASIC in which the declarations and real-time statements are defined for use with CAMAC... Active Standard
741-1986 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsThis document prescribes criteria that establish protection requirements for Class 1E power systems and equipment. It describes the purpose of and... Superseded Standard
741-1990 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsCriteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and the means for... Superseded Standard
741-1997 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsIn this IEEE Standard, criteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and... Superseded Standard
741-2007 - Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating StationsCriteria that establish protection requirements for Class 1E power systems and equipment are prescribed in this standard. The purpose of and the... Active Standard
749-1983 - Standard Periodic Testing of Diesel-Generator Units Applied as Standby Power Supplies in Nuclear Power Generating StationsWithdrawn Date: Dec 05, 1991. This standard applies to the periodic testing of diesel-generator units applied as standby power supplies in nuclear... Withdrawn Standard
758-1979 - Standard Subroutines for Computer Automated Measurement and Control (CAMAC)This IEEE standard presents a recommended set of software subroutines for use with the CAMAC modular instrumentation and interface system of IEEE... Active Standard
759-1984 - Standard Test Procedures for Semiconductor X-Ray Energy SpectrometersAdministratively Withdrawn January 2007. Test procedures for X-ray spectrometers consisting of a semiconductor radiation detector assembly and... Withdrawn Standard
765-1983 - Preferred Power Supply for Nuclear Power Generating StationsThe design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and... Superseded Standard
765-1995 - Preferred Power Supply (PPS) for Nuclear Power Generating StationsIn this IEEE Standard, the design criteria of the prefered power supply (PPS) and its interfaces with the Class 1E power system, switchyard,... Superseded Standard
765-2002 - Preferred Power Supply (PPS) for Nuclear Power Generating StationsAbstract: The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission... Superseded Standard
765-2006 - Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and... Superseded Standard
765-2012 - Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and... Active Standard
770X3.97-1983 - Standard Pascal Computer Programming LanguageThis standard provides an unambiguous and machine independent definition of the language Pascal. Its purpose is to facilitate the portability of... Withdrawn Standard
770X3.160-1989 - /ANSI the Programming Language Extended PascalThe standard provides an unambiguous and machine-independent definition of the computer programming language Extended Pascal by specifying... Withdrawn Standard
803-1983 - Recommended Practice for Unique Identification in Power Plants and Related Facilities - Principles and DefinitionsWithdrawn Standard. Withdrawn Date: Feb 06, 2006. This recommended practice provides unique identification principles and definitions that, when... Withdrawn Standard
803.1-1992 - Recommended Practice for Unique Identification in Power Plants and Related Facilities--Component Function IdentifiersThe recommended practice provides component function identifiers that, when used with related recommended practices concerning unique... Withdrawn Standard
803A-1983 - Recommended Practice for the Unique Identification in Power Plants and Related Facilities - Component Function IdentifiersThis recommeded practice provides a single source of component function identifiers which, along with related recommended practices concerning... Superseded Standard
805-1984 - Recommended Practice for System Identification in Nuclear Power Plants and Related FacilitiesThis recommended practice provides a single source of nuclear power plant system descriptions that, along with related recommended practices... Withdrawn Standard
833-1988 - Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water HazardsPresents recommended practices for providing the electric systems and equipment in nuclear power plants with protection from water hazards. The... Superseded Standard
833-2005 - Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water HazardsGuidance regarding protection of electrical equipment from sources of water directed onto or around electrical equipment is provided. Active Standard
845-1988 - Guide to Evaluation Man-Machine Performance in Nuclear Power Generating Station Control Rooms and Other PeripheriesThe purpose of this guide is to provide guidance for the selection and application of human factors techniques to carry out the following tasks in... Superseded Standard
845-1999 - Guide for the Evaluation of Human-System Performance in Nuclear Power Generating StationsGuidance for evaluating human-system performance related to systems, equipment, and facilities in nuclear power generating stations is provided.... Active Standard
933-1999 - Guide for the Definition of Reliability Program Plans for Nuclear Power Generating StationsGuidelines for the definition of a reliability program at nuclear power generating stations are developed. Reliability programs during the... Superseded Standard
933-2013 - Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear FacilitiesGuidelines for the definition of a reliability program at nuclear generating stations and other nuclear facilities are provided. The document... Active Standard
934-1987 - Standard Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating StationsThe standard sets forth basic requirements for the selection and utilization of replacement parts for Class IE equipment in nuclear power... Withdrawn Standard
944-1986 - Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating StationsThe application and performance requirements for a low-voltage uninterruptible power supply system used for service in power generating stations... Withdrawn Standard
960-1989 - Standard FASTBUS Modular High-Speed Data Acquisition and Control System and IEEE FASTBUS Standard RoutinesMechanical, signal, electrical, and protocol specifications are given for a modular data bus system, which, while allowing equipment designers a... Superseded Standard
960/1177-1993 - Standard FASTBUS Modular High-Speed Data Acquisition and Control System and IEEE FASTBUS Standard Routines960-1993 Abstract: Mechanical, signal, electrical, and protocol specifications are given for a modular data bus system, which, while allowing... Active Standard
1023-1988 - Guide for the Application of Human Factors Engineering to Systems, Equipment and Facilities of Nuclear Power Generating StationsThe intent of this guide is to provide guidance to management and engineers to develop an integrated program for the application of human factors... Superseded Standard
1023-2004 - Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear FacilitiesThis document provides recommended practices for applying human factors engineering (HFE) to systems and equipment that have significant human... Active Standard
1033-1985 - Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating StationsThis document provides the recommended practice for application of ANSI/IEEE Std 828-1983, IEEE Standard for Software Configuration Management... Withdrawn Standard
1082-1997 - Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating StationsA structured framework for the incorporation of human/system interactions into probabilistic risk assessments for nuclear power plants is provided... Active Standard
1131-1987 - Standard Cryostat End-Cap Dimensions for Germanium Semiconductor Gamma-Ray SpectrometersThis standard establishes fixed dimensions for end-caps in the interests of interchangeability of cryostats from various manufacturers. Seven... Withdrawn Standard
1160-1993 - Standard Test Procedures for High-Purity Germanium Crystals for Radiation DetectorsThis standard applies to the measurement of bulk properties of high-purity germanium as they relate to the fabrication and performance of... Active Standard
1177-1993 - FASTBUS Standard Routines1177-1993 Abstract: Standard software routines for use with the system in IEEE Std 960-1993 are defined. 960-1993 Abstract: Mechanical, signal,... Superseded Standard
1205-1993 - Guide for Assessing, Monitoring and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating StationsThe guidelines are provided for assessing, monitoring, and mitigating degradation of Class 1E equipment used in nuclear power generating stations... Superseded Standard
1205-2000 - Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating StationsGuidelines for assessing, monitoring, and mitigating aging degradation effects on Class 1E equipment used in nuclear power generating stations are... Superseded Standard
1205-2014 - Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear FacilitiesGuidelines for assessing, monitoring, and mitigating aging degradation effects on electrical equipment used in nuclear power generating stations... Active Standard
1214-1992 - Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear SpectroscopyA standard format for data interchange used to transfer multichannel pulse height data on magnetic media between laboratories is provided. The... Active Standard
1289-1998 - Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating StationsSystem design considerations, information display and control techniques for use with computer-based displays, and human factors engineering... Active Standard
1290-1996 - Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating StationsMotors used to drive valve operators in nuclear power generating stations are discussed. Guidelines to evaluate the adequecy of motors used to... Active Standard
C37.2-1987 - Standard Electrical Power System Device Function NumbersThis standard applies tot he definition and application of function numbers for devices used in electrical substations and generating plants and... Superseded Standard
C37.2-1991 - Standard Electrical Power System Device Function NumbersA device function number, with an appropriate prefix and suffix where necessary, is used to identify the function of each device in all types of... Superseded Standard
C37.2-1996 - Standard Electrical Power System Device Function Numbers and Contact DesignationsThe definition and application of function numbers for devices used in electrical substations and generating plants and in installations of power... Superseded Standard
C37.2-2008 - Standard Electrical Power System Device Function Numbers, Acronyms, and Contact DesignationsThe definition and application of function numbers and acronyms for devices and functions used in electrical substations and generating plants and... Active Standard
N42.4-1971 - American National High Voltage Connectors for Nuclear InstrumentsThis standard provides for interchangeability of safe high voltage connectors in nuclear instrument applications. This standard is applicable to... Withdrawn Standard
N42.5-1965 - American National Bases for GM Counter TubesThis document contains two standards. ANSI N42.5 specifies bases for Geiger-Mueller counter tubes. ANSI N42.6 specifies interrelating mechanical... Active Standard
N42.6-1980 - American National Standard Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter ChargersThe purpose of this standard is to specify interrelating mechanical and electrical properties so that quartz-fiber exposure meters may be used... Active Standard
N42.12-1980 - American National Standard Calibration and Usage of Sodium Iodide Detector SystemsThis standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma... Superseded Standard
N42.12-1994 - American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of RadionuclidesMethods for performance testing, calibration, and usage of NaI(T1) detector systems for the measurement of gamma ray emission rates of... Active Standard
N42.13-1986 - American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of RadionuclidesThe wide range of calibrator-type instruments currently being used primarily for radionuclide assay in nuclear medicine indicates the need for a... Active Standard
N42.14-1978 - American National Standard Calibration and Usage of Germanium Detectors for Measurement of Gamma-Ray Emission of RadionuclidesThis standard establishes methods for calibration and usage of germanium detectors for the measurement of gamma-ray emission rates of... Superseded Standard
N42.14-1991 - American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of RadionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.14-1999 - American National Calibration and use of germanium spectrometers for the measurement of gamma-ray emission rates of radionuclidesMethods for the calibration and use of germanium spectrometers for the measurement of gamma-ray energies and emission rates over the energy range... Active Standard
N42.15-1980 - American National Standard Performance Verification of Liquid-Scintillation Counting SystemThe purpose of this standard is to provide the user with a means of verifying the performance of typical liquid-scintillation counting systems.... Superseded Standard
N42.15-1990 - Performance Verification of Liquid-Scintillation Counting Systems, American National StandardProvides designers and users with tests and procedures to assure that a liquid-scintillation counting system is producing reliable data. This... Superseded Standard
N42.15-1997 - American National Standard Check Sources for and Verification of Liquid-Scintillation Counting SystemsTests and procedures to ensure that a liquid-scintillation counting system is producing reliable data are provided for designers and users. This... Active Standard
N42.16-1986 - American National Standard Specifications for Sealed Radioactive Check Sources Used in Liquid-Scintillation CountersThe liquid-scintillation counter measures activity of radionuclides from the rate of light photons emitted by a liquid sample. The total light... Superseded Standard
N42.17A-1989 - American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions Minimum acceptable performance criteria for health physics instrumentation for use in ionizing radiation fields are established. Included are... Superseded Standard
N42.17A-2003 - American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental ConditionsThis standard establishes the minimum performance criteria for health physics instrumentation for use in ionizing radiation fields. Testing... Active Standard
N42.17B-1989 - Performance Specifications for Health Physics Instrumentation - Occupational Airborne Radioactivity Monitoring Instrumentation, American National StandardThe standard describes the minimum acceptable performance criteria for instrumentation used to monitor occupational exposure to airborne... Active Standard
N42.17C-1989 - Performance Specifications for Health Physics Instrumentation--Portable Instrumentation for Use in Extreme Environmental Conditions, American National StandardANSI N42.17C-1989 describes the minimum acceptable performance criteria for health physics instrumentation for use under extreme environmental... Active Standard
N42.18-1980 - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National StandardThis standard provides recommendations for the selection of instrumentation specific to the continuous monitoring and quantification of... Active Standard
N42.18-2004 - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in EffluentsThis standard provides recommendations for the selection of instrumentation specific to the continuous monitoring and quantification of... Active Standard
N42.20-1995 - ANSI Performance Criteria for Active Personnel Radiation MonitorsPerformance and design criteria are provided for monitors that are worn on the trunk of the body to measure the personal dose equivalent or the... Superseded Standard
N42.20-2003 - American Standard Performance Criteria for Active Personnel Radiation MonitorsPerformance and design criteria are provided in this standard for monitors that are worn on the trunk of the body to measure the personal dose... Active Standard
N42.22-1995 - American National Standard Traceability of Radioactive Sources to NIST and Associated Instrument Quality ControlA mechanism for manufacturers to establish traceability of radionuclide sources that are certified for radionuclide activity; concentration; or... Active Standard
N42.23-1996 - American National Standard Measurement and Associated Instrumentation Quality Assurance for Radioassay LaboratoriesA framework that can be used to create a national or an organizational NIST-traceable measurement quality assurance (MQA) program that will... Active Standard
N42.25-1997 - American National Standard Calibration and Usage of Alpha/Beta Proportional CountersThis standard establishes methods for the calibration and use of gas proportional counters with and without active guard detectors. This standard... Active Standard
N42.27-1999 - American National Determination of Uniformity of Solid Gamma-Emitting Flood SourcesMinimum informational requirements for a Test and Measurement Report for flood sources used with scintillation cameras are provided. It is not... Active Standard
N42.28-2002 - American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray MeasurementsThe need for accurately measuring radioactivity in-situ for a variety of detector characterization techniques requires that performance criteria... Active Standard
N42.30-2002 - American National Performance Specification for Tritium MonitorsThe performance requirements for tritium monitors used for monitoring airborne tritium radioactivity are provided in this standard. It also... Active Standard
N42.31-2003 - American National Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing RadiationStandard measurement and test procedures are established for wide-bandgap semiconductor detectors such as cadmium telluride (CdTe), cadmium-zinc... Active Standard
N42.32-2003 - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland SecurityPerformance specifications, design criteria, and testing methods are provided for the evaluation of radiation detection instruments that are... Active Standard
N42.32-2006 - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland SecurityPerformance specifications, design criteria, and testing methods are provided for the evaluation of radiation detection instruments that are... Active Standard
N42.33-2003 - Americal National Portable Radiation Detection Instrumentation for Homeland SecurityThis standard describes design criteria, performance requirements and performance tests for portable radiation survey instruments. Active Standard
N42.33-2006 - American National Portable Radiation Detection Instrumentation for Homeland SecurityDesign criteria, performance requirements, and performance tests for portable radiation survey instruments are described in this standard. Active Standard
N42.34-2004 - American National Standard Performance Criteria for Hand-held Instruments for the Detection and Indentification of RadionuclidesThis standard describes the performance requirements for hand-held radionuclide identifying instruments.The requirements stated are based on... Active Standard
N42.34-2006 - American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides The performance requirements for hand-held radionuclide identifying instruments are described in this standard. The requirements stated are based... Active Standard
N42.35-2004 - American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland SecurityThis standard describes the performance requirements for portal monitor instruments. The requirements stated are based on instruments used in... Active Standard
N42.35-2006 - American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland SecurityThe performance requirements for portal monitor instruments are described in this standard. The requirements stated are based on instruments used... Active Standard
N42.37-2006 - American National Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and PreventionTraining requirements for homeland security purposes using radiation detection instrumentation for interdiction and prevention are described. Active Standard
N42.38-2006 - American National Standard Performance Criteria for Spectroscopy-Based Portal Monitors Used for Homeland SecurityThe performance requirements for radionuclide identifying portal monitors, also referred to as spectroscopic portal monitors, are described in... Active Standard
N42.41-2007 - American National Standard Minimum Performance Criteria for Active Interrogation Systems Used for Homeland SecurityThe performance criteria for active interrogation systems in homeland security applications are described in this standard. These systems are... Active Standard
N42.42-2006 - American National Standard Data Format Radiation Detectors Used for Homeland SecurityThis standard specifies the data format that shall be used for both required and optional data to be made available by radiation instruments for U... Active Standard
N42.42-2012 - American National Standard Data Format for Radiation Detectors Used for Homeland SecurityThe data format that shall be used for both required and optional data to be made available by radiation measurement instruments for homeland... Active Standard
N42.43-2006 - American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland SecurityThe operational and performance requirements for transportable and/or mobile radiation monitors used in homeland security applications are... Active Standard
N42.44-2008 - American National the Performance of Checkpoint Cabinet X-Ray Imaging Security SystemsThis document establishes standards for the technical performance of cabinet X-ray imaging systems used for screening at security checkpoints and... Active Standard
N42.45-2011 - American National Evaluating the Image Quality of X-ray Computed Tomography (CT)Security-Screening SystemsTest methods and test articles for the evaluation of the image quality of CT security screening systems are provided. The quality of data for... Active Standard
N42.46-2008 - American National Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security ScreeningThis standard is intended to be used to determine the imaging performance of X-ray and gamma-ray systems utilized to inspect loaded or empty... Active Standard
N42.47-2010 - American National Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of HumansThis standard applies to security screening systems that utilize x-ray or gamma radiation and are used to inspect people who are not inside... Active Standard
N42.48-2008 - American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland SecurityThis standard describes design and performance requirements along with testing methods for evaluating radiation detection instruments that are... Active Standard
N42.49A-2011 - American National Performance Criteria for Alarming Electronic Personal Emergency Radiation Detectors (PERDs) for Exposure ControlThis standard establishes minimum performance criteria and test requirements for four categories of alarming electronic radiation detectors used... Active Standard
N42.49B -2013 - American National Performance Criteria for Non-alarming Personal Emergency Radiation Detectors (PERDs) for Exposure ControlThe purpose of this standard is to specify technical performance requirements and performance testing requirements for those purchasing and using... Active Standard
N42.53-2013 - American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland SecurityThe operational and performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security applications are... Active Standard
N42.55-2013 - American National the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device IdentificationThe purpose of this standard is to establish requirements and methods of test for portable transmission x-ray systems for use in improvised... Active Standard
N317-1980 - American National Standard Performance Criteria for Instrumentation Used for Inplant Plutonium MonitoringThe monitoring of plutonium requires special instrumentation considerations in order to achieve optimum measurement performance. Performance... Active Standard
N320-1979 - American National Standard Performance Specifications for Reactor Emergency Radiological Monitoring InstrumentationThis standard defines, for various types of instrumentation, the essential performance parameters, and general placement for monitoring the... Active Standard
N322-1977 - American National Standard Inspection and Test Specifications for Direct and Indirect Reading Quartz Fiber Pocket DosimetersThe procedures to be used by manufacturers in testing direct and indirect reading quartz fiber pocket dosimeters for measuring X-ray and gamma-ray... Superseded Standard
N322-1997 - American National Standard Inspection,Test, Construction, and Performance Requirements for Direct Reading Electrostatic/Electroscope Type DosimetersInspection, test, construction and performance requirements for direct reading electrostatic/electroscope type dosimeters designed to measure the... Active Standard
N323-1978 - American National Standard Radiation Protection Instrumentation Test and CalibrationThis standard establishes calibration methods for portable radiation protection instruments used for detection and measurement of levels of... Active Standard
N323A-1997 - American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey InstrumentsSpecific requirements are established for portable radiation protection instruments used for detection and measurement of levels of ionizing... Superseded Standard
N323B-2003 - American National Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background OperationMinimum performance requirements for portable radiation protection instruments used for detection and measurement of ionizing radiation fields or... Superseded Standard
N323C-2009 - American National Standard Radiation Protection Instrumentation Test and Calibration – Air Monitoring InstrumentsThis standard establishes test and calibration requirements for air monitoring instruments used for the detection and measurement of airborne... Active Standard
N323D-2002 - American National Installed Radiation Protection InstrumentationThis standard establishes specific requirements for installed instruments that measure dose, dose equivalent, dose rate, or dose equivalent rate... Active Standard
N449.1-1978 - American National Standard Procedures for Periodic Inspection of Cobalt-60 and Cesium-137 Teletherapy EquipmentProcedures for the inspection of cobalt-60 and cesium-137 teletherapy equipment are suggested. Their purpose is to enable users to identify and... Active Standard