Standard Icon

Nuclear Power Standards

Displaying results 1 - 40 of 233
Standard Name
Status Help less all
308-1971 - Standard Criteria for Class IE Electric Systems for Nuclear Power Generating StationsThis standard applies to those parts of the electric systems in stationery single-unit and multi-unit land-based nuclear power generating stations... Superseded Standard
765-2012 - Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and... Active Standard
497-2010 - Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating StationsCriteria are established in this standard for variable selection, performance, design, and qualification of accident monitoring instrumentation,... Active Standard
N42.47-2010 - American National Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of HumansThis standard applies to security screening systems that utilize x-ray or gamma radiation and are used to inspect people who are not inside... Active Standard
308-2012 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of ac and dc power systems and I&C power systems in single-unit and multiunit nuclear power generating stations are covered... Active Standard
338-2012 - Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station SafetyThe standard provides criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems. The scope... Active Standard
7-4.3.2-2010 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-2009 are specified. Within the context of... Active Standard
933-2013 - Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear FacilitiesGuidelines for the definition of a reliability program at nuclear generating stations and other nuclear facilities are provided. The document... Active Standard
420-2013 - the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating StationsThis standard specifies the design requirements for new and/or modified Class 1E control boards, panels, and racks and establishes the methods to... Active Standard
11073-00103-2012 - Personal health device communication Part 00103: OverviewWithin the context of the ISO/IEEE 11073 family of standards for device communication, the landscape of transport-independent applications and... Active Standard
1682-2011 - Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating StationsThis standard provides general requirements, directions, and methods for qualifying fiber optic cables, connections, and optical fiber splices for... Active Standard
62582-1-2011 - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: GeneralIEC/IEEE 62582-1:2011 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition... Active Standard
62582-2-2011 - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter modulusIEC/IEEE 62582-2:2011 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using... Active Standard
62582-4-2011 - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 4: Oxidation induction techniquesIEC/IEEE 62582-4:2011 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using... Active Standard
1205-2014 - Approved Draft Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear FacilitiesGuidelines for assessing, monitoring, and mitigating aging degradation effects on electrical equipment used in nuclear power generating stations... Active Standard
N42.49A-2011 - American National Performance Criteria for Alarming Electronic Personal Emergency Radiation Detectors (PERDs) for Exposure ControlThis standard establishes minimum performance criteria and test requirements for four categories of alarming electronic radiation detectors used... Active Standard
N42.45-2011 - American National Evaluating the Image Quality of X-ray Computed Tomography (CT)Security-Screening SystemsTest methods and test articles for the evaluation of the image quality of CT security screening systems are provided. The quality of data for... Active Standard
692-2013 - Criteria for Security Systems for Nuclear Power Generating StationsCriteria for the design of an integrated security system for nuclear power generating stations are provided in this standard. Requirements are... Active Standard
344-2013 - Seismic Qualification of Equipment for Nuclear Power Generating StationsPractices are provided for establishing procedures that will yield data to demonstrate that the equipment can meet its performance requirements... Active Standard
535-2013 - Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating StationsQualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary... Active Standard
N42.42-2012 - American National Standard Data Format for Radiation Detectors Used for Homeland SecurityThe data format that shall be used for both required and optional data to be made available by radiation measurement instruments for homeland... Active Standard
323-1971 - Trial-Use Standard: General Guide for Qualifying Class I Electric Equipment for Nuclear Power Generating StationsThis document describes the basic requirements for the qualification of Class I electric equipment. This is equipment which is essential to the... Superseded Standard
N42.53-2013 - American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland SecurityThe operational and performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security applications are... Active Standard
308-1974 - Standard Criteria for Class IE Power Systems for Nuclear Power Generating StationsThis standard applies to the electric systems in stationary single-unit and multi-unit nuclear power generating stations that provide electric... Superseded Standard
344-1971 - Trial-Use Guide for Seismic Qualification of Class I Electric Equipment for Nuclear Power Generating StationsThis guide provides direction for establishing procedures that will yield data which verify that the Class I electric equipment can meet its... Superseded Standard
344-1975 - Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating StationsThese recommended practices provide direction for establishing procedures that will yield data which verify that the class 1E equipment can meet... Superseded Standard
N42.55-2013 - American National the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device IdentificationThe purpose of this standard is to establish requirements and methods of test for portable transmission x-ray systems for use in improvised... Active Standard
7-4.3.2-2003 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603TM - 1998 are specified. Within the context... Superseded Standard
7-4.3.2-1993 - Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating StationsAdditional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-1991 are specified. Within the context of... Superseded Standard
175-1960 - IRE Standards on Nuclear Techniques: Definitions for the Scintillation Counter Field, 1960Reprinted from the proceedings of the I.R.E Vol. 48, NO.8 August 1960 Withdrawn Standard
279-1971 - Standard: Criteria for Protection Systems for Nuclear Power Generating StationsWithdrawn Standard June 1984. These criteria established minimum requirements for the safety-related functional performance and reliability of... Withdrawn Standard
300-1988 - Standard Test Procedures for Semiconductor Charged-Particle DetectorsThis standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged particles.... Active Standard
301-1988 - Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing RadiationThis standard describes test procedures for amplifiers and preamplifiers that are used with semiconductor, scintillation, and proportional... Active Standard
308-1980 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsThis standard applies to the Class 1E portions of the following systems and equipment in single unit and multi-unit nuclear power generating... Superseded Standard
308-1991 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of Ac and Dc power systems and instrumentation and control power systems in single-unit and multiunit nuclear power generating... Superseded Standard
308-2001 - Standard Criteria for Class 1E Power Systems for Nuclear Power Generating StationsClass 1E portions of alternating current and direct current power systems and instrumentation and control power systems in single-unit and... Superseded Standard
309-1970 - Standard Test Procedure for Geiger-Müller CountersThis publication presents standard test procedures for Geiger-Muller counter radiation detectors. These detectors, originally announced by ?Geiger... Superseded Standard
309/N42.3-1999 - Standard Test Procedures and Bases for Geiger-Mueller CountersTest procedures for Geiger-Mueller counters that are used for the detection of ionizing radiation are presented so that they have the same meaning... Active Standard
Displaying results 1 - 40 of 233 - all results