Standard Icon

Instrumentation and Measurement Standards

Displaying results 281 - 320 of 676
Standard Name
Status Help less all
675-1982 - Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)This IEEE standard defines a method for incorporating more than one source of control into a CAMAC crate. The standard fully conforms to the... Active Standard
683-1976 - Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms can satisfy... Active Standard
691-1985 - Trial-Use Guide for Transmission Structure Foundation DesignFoundations for transmission structures are subjected to unique loading conditions in which a high portion of the load is transitory and involves... Withdrawn Standard
691-2001 - Guide for Transmission Structure Foundation Design and TestingThe design of foundations for conventional transmission line structures, which include lattice towers, single or multiple shaft poles, H-frame... Active Standard
716-1989 - Standard C/ATLAS Test LanguageIEEE Std 716-1989 defines IEEE Common ATLAS (C/ATLAS), a high-order language for testing on Automatic Test Equipment (ATE). C/ATLAS is a widely... Superseded Standard
716-1995 - Standard Test Language for All Systems - Common/Abbreviated Test Language for All Systems (C/ATLAS)A high order language for testing is defined. This language is designed to describe tests in terms that are independent of any specific test... Active Standard
726-1982 - Standard Real-Time BASIC for CAMAC (Computer Automated Measurement and Control)Real-time BASIC for CAMAC is ANSI standard real-time BASIC in which the declarations and real-time statements are defined for use with CAMAC... Active Standard
746-1984 - Performance Measurements of A/D and D/A Converters for PCM Television Video CircuitsThis standard describes methods for measuring the performance of uniformly coded analog-to-digital (A/D) converters and digital-to-analog (D/A)... Withdrawn Standard
748-1979 - Spectrum AnalyzersThis standard applies to frequency scanning spectrum analyzers. Instruments covered by this standard include: swept front end (superheterodyning... Withdrawn Standard
749-1983 - Standard Periodic Testing of Diesel-Generator Units Applied as Standby Power Supplies in Nuclear Power Generating StationsWithdrawn Date: Dec 05, 1991. This standard applies to the periodic testing of diesel-generator units applied as standby power supplies in nuclear... Withdrawn Standard
752-1986 - Functional Requirements for Methods and Equipment for Measuring the Performance of Tone Address Signal SystemsThis standard provides brief descriptions of applicable tone address signaling techniques and definitions of the related signaling parameters that... Withdrawn Standard
758-1979 - Standard Subroutines for Computer Automated Measurement and Control (CAMAC)This IEEE standard presents a recommended set of software subroutines for use with the CAMAC modular instrumentation and interface system of IEEE... Active Standard
759-1984 - Standard Test Procedures for Semiconductor X-Ray Energy SpectrometersAdministratively Withdrawn January 2007. Test procedures for X-ray spectrometers consisting of a semiconductor radiation detector assembly and... Withdrawn Standard
771-1989 - Guide to the Use of the ATLAS SpecificationANSI/IEEE Std 416-1984, ATLAS Test Language, IEEE Std 716-1989, IEEE Standard C/ATLAS Test Language, and ARINC Specification 626-1-1989, Standard... Superseded Standard
771-1998 - Guide to the Use of the ATLAS SpecificationGuidance in the use of ATLAS test languages is provided. ATLAS may be used to describe test requirements independent of any specific test... Active Standard
775-1993 - Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation EnvironmentGuidelines for evaluating electrical insulation materials that are subjected to more than one significant aging stress are provided. The focus is... Withdrawn Standard
790-1989 - Guide for Medical Ultrasound Field Parameter MeasurementsThis IEEE standard describes procedures for measuring medical ultrasound field parameters such as pressure, power and intensity. It is intended... Withdrawn Standard
802-1990 - Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Active Standard
802.1aq-2012 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 20: Shortest Path BridgingThis amendment to IEEE Std 802.1Q-2011 specifies shortest path bridging of unicast and multicast frames, including protocols to calculate multiple... Active Standard
802.16/Conformance02-2003 - Conformance to Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface(Conformance to IEEE Std 802.16-2001 as amended by IEEE Std 802.16a ™ -2003 and IEEE Std 802.16c ™ -2002). This standard represents the Test Suite... Withdrawn Standard
802.16/Conformance03-2004 - Conformance to Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air InterfaceThis standard represents the Radio Conformance Tests (RCT) specification for base stations and subscriber stations based upon the WirelessMAN-SC... Withdrawn Standard
813-1988 - Specification Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned GyrosThis specification defines the requirements for a two-degree-of-freedom dynamically tuned gyro to be used as a sensor in a strapdown, gimballed... Active Standard
817-1993 - Standard Test Procedure for Flame-Retardant Coatings Applied to Insulated Cables in Cable TraysA test protocol and the performance criteria to determine the flame propagation tendency of flame-retardant coated cables in a vertical cable tray... Withdrawn Standard
829-1983 - Software Test DocumentationA set of basic test documents that are associated with the dynamic aspects of software testing (that is, the execution of procedures and code) is... Superseded Standard
829-1998 - Software Test DocumentationA set of basic software test documents is described. This standard specifies the form and content of individual test documents. It does not... Superseded Standard
829-2008 - Software and System Test DocumentationTest processes determine whether the development products of a given activity conform to the requirements of that activity and whether the system... Active Standard
836-1991 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersA guide to the conduct and analysis of precision centrifuge tests of linear accelerometers is provided, covering each phase of the tests beginning... Superseded Standard
836-2001 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersThis recommended practice provides a guide to the conduct and analysis of precision centrifuge tests of linear accelerometers, covering each phase... Superseded Standard
836-2009 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersThis recommended practice describes the conduct and analysis of precision tests that are to be performed on linear accelerometers using centrifuge... Active Standard
839-1986 - Guide on Procedures for Testing Single-Phase and Polyphase Induction Motors for Use in Hermetic CompressorsThis guide specifies test procedures to determine the efficiency and other performance characteristics of hermetic motors. Hermetic motors are... Withdrawn Standard
844-1991 - Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and VesselsRecommended practices are provided for the design, installation, testing, operation, and maintenance of impedance, induction, and skin-effect... Superseded Standard
844-2000 - Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and VesselsRecommended practices are provided for the design, installation, testing, operation, and maintenance of impedance, induction, and skin-effect... Active Standard
853-1985 - Recommended Practice for Voltage-Endurance Testing of Enameled WireWithdrawn Standard. Withdrawn Date: Jun 14, 1994. The scope of this recommended practice covers the application of center grounded applied coltage... Withdrawn Standard
857-1990 - Guide for Test Procedures for HVDC Thyristor ValvesThis guide contains information and recommendations for the type testing of thyristor valves for high-voltage direct-current (HVDC) power... Superseded Standard
857-1996 - Recommended Practice for Test Procedures for High-Voltage Direct-Current Thyristor ValvesInformation and recommendations for the type testing of thyristor valves for high-voltage direct-current (HVDC) power transmission systems are... Withdrawn Standard
896.4-1993 - Conformance Test Requirements for Futurebus+(R)A suite of abstract test cases for verifying the conformance of products based on the Futurebus+ family of standards and a means of selecting the... Withdrawn Standard
896.4a-1995 - Conformance Test Requirements for Futurebus+(R) - Errata, Corrections and ClarificationsErrata, corrections, and clarifications to IEEE Std 896.4-1993, as well as a new diskette version of the conformance test suite to replace the... Withdrawn Standard
Displaying results 281 - 320 of 676 - all results