Standard Icon

Instrumentation and Measurement Standards

Displaying results 161 - 200 of 676
Standard Name
Status Help less all
268-1992 - American National Metric PracticeGuidance for the application of the modernized metric system in the United States is given. Known as the International System of Units (SI), the... Superseded Standard
270-2006 - Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)The definitions for physical quantities and units commonly used in applied science and technology, and for related terms that concern systems of... Active Standard
271-1966 - Technical Report on Switching Surge Testing of Extra-High-Voltage SwitchesThis standard provides guidance in the switching surge testing of EHV air switches. For the design and safe application of EHV air switches, it is... Superseded Standard
272-1970 - Computer-Type (Square-Loop) Pulse TransformersThis standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a 'square-loop' core... Withdrawn Standard
280-1985 - Standard Letter Symbols for Quantities Used in Electrical Science and Electrical EngineeringThe standard covers letter symbols used to represent physical quantities in electrical science and engineering. The general principles of letter... Active Standard
284-1968 - Standards Report on State-of-the-Art of Measuring Field Strength, Continuous Wave, SinusoidalThis document is a Report on the state-of-the-art of measuring field strength of radio-frequency electromagnetic waves, with respect to available... Withdrawn Standard
287-2007 - Precision Coaxial Connectors (DC to 110 GHz)This standard presents the combined efforts of IEEE Subcommittee P287 that reflect the knowledge and experience of leading specialists in the... Active Standard
290-1980 - Electric Couplings; Part I - General, Rating, Performance Characteristics; Part II - Test ProceduresElectric couplings are widely used to transmit mechanical torque from one rotating member to another. They are distinguished from mechanical... Withdrawn Standard
293-1969 - Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate GyrosThis test procedure is a compilation of recommended rate gyro test procedures derived from those currently in use, including test conditions to be... Active Standard
300-1988 - Standard Test Procedures for Semiconductor Charged-Particle DetectorsThis standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged particles.... Active Standard
301-1988 - Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing RadiationThis standard describes test procedures for amplifiers and preamplifiers that are used with semiconductor, scintillation, and proportional... Active Standard
304-1977 - Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current MachinesThis test procedure has been prepared to serve as a useful guide for the evaluation of insulation systems for direct-current machines and to... Withdrawn Standard
306-1969 - Test Procedure for Charging InductorsProvides standardised methods of determining the electrical parameters of charging inductors used in radar transmitters, linear particle... Withdrawn Standard
309-1970 - Standard Test Procedure for Geiger-Müller CountersThis publication presents standard test procedures for Geiger-Muller counter radiation detectors. These detectors, originally announced by ?Geiger... Superseded Standard
309/N42.3-1999 - Standard Test Procedures and Bases for Geiger-Mueller CountersTest procedures for Geiger-Mueller counters that are used for the detection of ionizing radiation are presented so that they have the same meaning... Active Standard
310-1969 - Reference-Standard Electrical ResistorsThis standard applies to precision electrical resistors exhibiting a high degree of stability and intended for use as reference standards in... Withdrawn Standard
311-1970 - Standard Specification of General-Purpose Laboratory Cathode-Ray OscilloscopesThe purposes of this Standard are: to document the minimum information that users of general-purpose laboratory cathode-ray oscilloscopes... Withdrawn Standard
314-1971 - Standards Report on State of the Art of Measuring Unbalanced Transmission-Line ImpedanceThis document is concerned with reporting the state of the art of measuring impedance in distributed parameter coaxial waveguide systems,... Withdrawn Standard
315-1975 - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)A list of graphic symbols and class designation letters for use on electrical and electronics diagrams is provided. All of the symbols are... Active Standard
315A-1986 - Supplement to Graphic Symbols for Electrical and Electronics DiagramsGraphic symbols and information needed for use on electrical and electronic diagrams, which are internationally approved, are presented. Active Standard
316-1971 - Standard Requirements for Direct Current Instrument ShuntsThis standard applies to shunts for use in direct current circuits to extend the range of instruments or other measuring devices. This standard... Withdrawn Standard
319-1971 - Standard on Magnetostrictive Materials: Piezomagnetic NomenclatureThe purpose of this Standard is to make possible the comparison of the relative merits of magnetostrictive, electromagnetic, piezoelectric, and... Superseded Standard
319-1990 - Standard on Magnetostrictive Materials: Piezomagnetic NomenclatureThis standard serves to aid the comparison of the relative merits of magnetostrictive, electromagnetic, piezoelectric, and electrostrictive... Withdrawn Standard
325-1986 - Standard Test Procedures for Germanium Gamma-Ray DetectorsThe object of this standard is to establish standard test procedures for germanium gamma-ray detectors so that measurements have the same meaning... Withdrawn Standard
325-1996 - Standard Test Procedures for Germanium Gamma-Ray DetectorsTerminology and standard test procedures for germanium radiation detectors that are used for the detection and high-resolution spectrometry of... Active Standard
334-1974 - Type Tests of Continuous Duty Class 1E Motors for Nuclear Power Generating StationsSuperseded. Methods and requirements for qualifying continuous duty Class 1E motors for use in nuclear power generating stations are provided. The... Superseded Standard
334-1994 - Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating StationsMethods and requirements for qualifying continuous duty Class 1E motors for use in nuclear power generating stations are provided. The methods are... Superseded Standard
334-2006 - Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating StationsIt is required that Class 1E motors, with their interfaces, meet or exceed the specified performance requirements throughout their service life.... Active Standard
336-2005 - Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis guide provides considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control... Superseded Standard
336-1985 - Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear FacilitiesThis standard sets forth the requirements for installation, inspection, and testing of power, instrumentation, and control equipment and systems... Superseded Standard
336-2010 - Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear FacilitiesConsiderations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and... Active Standard
337-1972 - Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance AccelerometerThis standard was prepared by the Gyro and Accelerometer Panel of the Aerospace Electronics Systems Group of the Institute of Electrical and... Superseded Standard
338-2006 - Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety SystemsThe standard provides criteria for the performance of periodic testing of nuclear power generating station safety systems. The scope of periodic... Superseded Standard
338-1987 - Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety SystemsThis standard provides design and operational criteria for the performance of periodic testing as part of the surveillance program of nuclear... Superseded Standard
378-1986 - Standard on Network Analyzers (100 kHz to 18 GHz)This standard was written for users and manufacturers of automatic network analyzers. The purpose of the standard is to provide common terminology... Withdrawn Standard
381-1977 - Standard Criteria for Type Tests of Class 1E Modules Used in Nuclear Power Generating StationsThis document describes the basic requirements of a type test program with the objective of verifying that a module used as Class 1E equipment in... Withdrawn Standard
Displaying results 161 - 200 of 676 - all results