Standard Icon

Instrumentation and Measurement Standards

Displaying results 1 - 40 of 651
Standard Name
Status Help less all
C37.20.7-2007/Cor 1-2010 - Guide for Testing Metal-Enclosed Switchgear Rated up to 38 kV for Internal Arcing Faults Corrigendum 1This corrigendum corrects technical errors found in IEEE Std C37.20.7-2007 during use in laboratories concerning current values and arc initiation... Active Standard
433-2009 - Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low FrequencyThis recommended practice describes very low frequency withstand and diagnostic tests that are performed on the stator windings of ac electric... Active Standard
671-1985/Cor 1-2010 - Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block DiagramsIEEE Std 671-1985 provides specifications and test requirements for a non-gyroscopic inertial angular sensor that may measure angular jerk,... Active Standard
1241-2010 - Terminology and Test Methods for Analog-to-Digital ConvertersThe material presented in this standard is intended to provide common terminology and test methods for the testing and evaluation of analog-to... Active Standard
C37.09b-2010 - Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -- Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100The descriptions of the standard transient recovery voltage (TRV) envelopes and ratings are changed in this amendment. This is applicable for ac... Active Standard
4-2013 - High-Voltage Testing TechniquesStandard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages,... Active Standard
450-2010 - Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary ApplicationsMaintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead... Active Standard
400.2-2013 - Draft Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)This guide describes very low frequency (VLF) withstand and other diagnostic tests and measurements that are performed using VLF energization in... Active Standard
338-2012 - Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station SafetyThe standard provides criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems. The scope... Active Standard
1377-2012 - Utility Industry Metering Communication Protocol Application Layer (End Device Data Tables)Common structures are provided in this standard for encoding data in communication between End Devices (meters, home appliances, IEEE 1703 Nodes)... Active Standard
1017-2013 - Recommended Practice for Field Testing Electric Submersible Pump CableProcedures and test voltage values for acceptance and maintenance testing of electric submersible pump (ESP) cable systems are presented. This... Active Standard
21450-2010 - Information technology -- Smart transducer interface for sensors and actuators -- Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.0-2007. This standard provides a common basis for members of the IEEE 1451 family of standards to be interoperable. It... Active Standard
21451-1-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 1: Network Capable Application Processor (NCAP) information modelAdoption of IEEE Std 1451.1-1999. This standard defines an object model with a network-neutral interface for connecting processors to... Active Standard
21451-2-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.2-1997. A digital interface for connecting transducers to microprocessors is defined. A Transducer Electronic Data... Active Standard
21451-4-2010 - ISO/IEC/Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formatsAdoption of IEEE Std 1451.2-1997. A digital interface for connecting transducers to microprocessors is defined. A Transducer Electronic Data... Active Standard
81-2012 - Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding SystemPractical test methods and techniques are presented for measuring the electrical characteristics of grounding systems. Topics addressed include... Active Standard
1613a-2011 - Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations Amendment 1: Adding of one definition, DC power supply requirements (5.1), and Annex E- HistoryThis amendment clarifies requirements and explains the rationale for transient test requirements with the addition of one definition, dc power... Active Standard
C57.100-2011 - Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power TransformersA test procedure to provide a uniform method for investigating the effect of operating temperature on the life expectancy of liquid-immersed... Active Standard
SI_10-2010 - American National Metric Practiceconversion factors, International System, International System of Units, metric practice, metric system, rounding, SI, SI 10, Systeme... Active Standard
1641.1-2013 - Approved Draft Guide for the Use of IEEE Std 1641, Signal and Test DefinitionGuidance in the use of the signal and test definition standard is provided, IEEE 1641 provides the means to define and describe signals used in... Active Standard
1671.2-2012 - Automatic Test Markup Language (ATML) Instrument DescriptionAn exchange format is specified in this standard, using extensible markup language (XML), for identifying instrumentation that may be integrated... Active Standard
1851-2012 - Design Criteria of Integrated Sensor-Based Test Applications for Household AppliancesAn integrated framework of the test software for household appliances is defined. This standard specifies the test environment and the test... Active Standard
C37.242-2013 - Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and ControlGuidance for synchronization, calibration, testing, and installation of phasor measurement units (PMUs) applied in power systems is provided. The... Active Standard
26513-2010 - Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of DocumentationThis standard provides requirements for the test and review of software user documentation as part of the life cycle processes. It defines the... Active Standard
C57.16-2011 - Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected ReactorsRecommendations are given for reactors intended for series connection, in both transmission and distribution systems, to control power flow under... Active Standard
1222-2011 - Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power LinesThis standard covers the construction, mechanical, electrical and optical performance, installation guidelines, acceptance criteria, test... Active Standard
1303-2011 - Guide for Static Var Compensator Field TestsGeneral guidelines and criteria for the field testing of static var compensators (SVCs), before they are placed in-service, for the purpose of... Active Standard
C57.12.91-2011 - Standard Test Code for Dry-Type Distribution and Power TransformersThis revision addresses substantive changes to Clause 5, 10 and 11 This revision addresses substantive changes to Clause 5, Clause 10, and Clause... Active Standard
C57.98-2011 - Guide for Transformer Impulse TestsTransformer connections, test methods, circuit configurations, failure analysis of lightning impulse, and switching impulse testing of power... Active Standard
1591.1-2012 - Testing and Performance of Hardware for Optical Ground Wire (OPGW)Hardware performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (also known as shield... Active Standard
1658-2011 - Terminology and Test Methods of Digital-to-Analog Converter DevicesTerminology and test methods to clearly document prevalent world-wide terms used to describe and test digital-to-analog converters (DACs) are... Active Standard
515-2011 - the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial ApplicationsSpecific testing requirements for qualifying electrical resistance heating cables and heating devices for use in industrial applications, as well... Active Standard
62624-2009 - Test methods for measurement of electrical properties of carbon nanotubesAdoption of IEEE Std 1650-2005. Recommended methods and standardized reporting practices for electrical characterization of carbon nanotubes (CNTs... Active Standard
21451-7-2011 - Information technology--Smart transducer interface for sensors and actuators--Part 7: Transducers to radio frequency identification (RFID) systems communication protocols and transducer electronic data sheet (TEDS) formatsISO/IEC/IEEE 21451-7:2011 defines data formats to facilitate communications between radio frequency identification (RFID) systems and smart RFID... Active Standard
1717-2012 - Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test ProtocolStandardization of circuit integrity cable testing is beneficial to cable manufacturers, distributors, and users. Uniform procedures, consistent,... Active Standard
C57.152-2013 - Draft Guide for Diagnostic Field Testing of Fluid Filled Power Transformers, Regulators, and ReactorsDiagnostic tests and measurements that are performed in the field on fluid-filled power transformers and regulators are described. Whenever... Active Standard
1453-2011 - Recommended Practice--Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC)--Testing and measurement techniques--Flickermeter--Functional and design specificationsIEC 61000-4-15:2010 is adopted by this standard. IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus... Active Standard
716-1985 - Standard C/ATLAS Test LanguageANSI/IEEE Std 716-1985, Standard C/ATLAS, is an editorial revision and consolidation of C/ATLAS Test Language and C/ATLAS Syntax. C/ATLAS is a... Superseded Standard
C57.154-2012 - the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated TemperaturesAll liquid-immersed distribution, power, and regulating transformers that are designed to operate at temperatures that exceed the normal thermal... Active Standard
1202-2006/Cor 1-2012 - Flame-Propagation Testing of Wire and Cable - Corrigendum 1Corrected English unit conversions are included in this corrigendum to IEEE Std 1202-2006. Active Standard
Displaying results 1 - 40 of 651 - all results
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 »