Project Icon

Industry Applications Standards

Industry Applications Standards
Status Help
91-1973 - IEEE Graphic Symbols for Logic Diagrams (Two State Devices)This standard sets forth principles governing the formation of graphic symbols for logic diagrams in which the connections between symbo ... superseded Standard
141-1993 - IEEE Recommended Practice for Electric Power Distribution for Industrial PlantsThis IEEE Standards product is part of the Color Books family. A thorough analysis of basic electrical-systems considerations is present ... active Standard
142-1982 - IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book)The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, a ... superseded Standard
142-1991 - IEEE Recommended Practice for Grounding of Industrial and Commercial Power SystemsSuperseded by IEEE Std 142-2007 (Green Book). This IEEE Standars product is part of the Color Books family. The problems of system groun ... superseded Standard
142-2007 - IEEE Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, a ... active Standard
176-1987 - IEEE Standard on PiezoelectricityWithdrawn Standard. No abstract. withdrawn Standard
241-1990 - IEEE Recommended Practice for Electric Power Systems in Commercial BuildingsThis IEEE Standards product is part of the Color Books family. A guide and general reference on electrical design for commercial buildin ... active Standard
242-1986 - IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power SystemsThe ANSI/IEEE Std 242-1986, the IEEE Buff Book, deals with the proper selection, application, and coordination of the components which c ... superseded Standard
242-2001 - IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)This IEEE Standards product is part of the Color Books family. System protection and coordination serve to minimize damage to a system a ... active Standard
261-1965 - IEEE Letter Symbols for Thermoelectric DevicesThis document presents standard letter symbols for quantities used in the field of thermoelectric devices. active Standard
268-1973 - IEEE Recommended Practice for Units in Published Scientific and Technical WorkIn this period of transition, authors and editors of scientific and engineering literature sometimes need basic information on the Inter ... superseded Standard
268-1976 - IEEE/ASTM Standard Metric PracticeThis standard describes the International System of Units (SI), the modern version of the metric system. It includes listings of the bas ... superseded Standard
268-1979 - IEEE Standard Metric PracticeThis standard describes the International System of Units (SI), the modern version of the metric system. It includes listings of the bas ... superseded Standard
268-1982 - IEEE Standard Metric PracticeThis standard describes the International System of Units (SI), the modern version of the metric system. It includes listings of the bas ... superseded Standard
268-1992 - American National Standard for Metric PracticeGuidance for the application of the modernized metric system in the United States is given. Known as the International System of Units ( ... superseded Standard
270-2006 - IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)The definitions for physical quantities and units commonly used in applied science and technology, and for related terms that concern sy ... active Standard
277-1994 - IEEE Recommended Practice for Cement Plant Power DistributionElectrical distribution systems in cement plants that would result in satisfactory equipment utilization, reliability, performance, safe ... superseded Standard
277-2007 - IEEE Recommended Practice for Cement Plant Power DistributionThis document has been developed as a recommended practice for electrical distribution systems in cement plants with the objective of sa ... active Standard
280-1985 - IEEE Standard Letter Symbols for Quantities Used in Electrical Science and Electrical EngineeringLetter symbols used to represent physical quantities in the field of electrical science and electrical engineering are defined. The symb ... active Standard
315-1975 - IEEE Standard for Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)A list of graphic symbols and class designation letters for use on electrical and electronics diagrams is provided. All of the symbols a ... active Standard
399-1980 - IEEE Recommended Practice for Power System Analysis (IEEE Brown Book)Superseded by 399-1990. This recommended practice is a reference source for engineers involved in industrial and commercial power system ... superseded Standard
399-1990 - IEEE Recommended Practice for Industrial and Commercial Power System AnalysisSuperseded by 399-1997. This recommended practice is a reference source for engineers involved in industrial and commercial power syste ... superseded Standard
399-1997 - IEEE Recommended Practice for Industrial and Commercial Power Systems Analysis (Brown Book)This IEEE Standards product is part of the Color Books family. Today’s intensely competitive business environment forces plant and bui ... active Standard
421.4-2014 - IEEE Guide for the Preparation of Excitation System SpecificationsThis guide is intended to provide to the specification writer the information to prepare a specification for the purchase of an excitati ... active Standard
425-1957 - AIEE Test Code for Transistors - Semiconductor Definitions and Letter SymbolsTest code for Transistors - semiconductor definitions and letter symbols. withdrawn Standard
444-1973 - IEEE Standard Practices and Requirements for Thyristor Converters for Motor Drives Part 1- Converters for DC Motor Armature SuppliesThis standard applies to all types of line-commutated semiconductor power converters employing monocrystalline semiconductor thyristors ... withdrawn Standard
446-1987 - IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commerical ApplicationsRecommended engineering principles, practices, and guidelines for the selection and application of emergency and standby power systems a ... superseded Standard
446-1995 - IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial ApplicationsThis Recommended Practice addresses the uses, power sources, design, and maintenance of emergency and standby power systems. Chapter 3 ... active Standard
463-1977 - IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working ZonesMeans of safeguarding personnel while operating or maintaining equipment located in electrolytic cell line working zones are provided. I ... superseded Standard
463-1993 - IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working ZonesMeans of safeguarding personnel while operating or maintaining equipment located in electrolytic cell line working zones are provided. I ... withdrawn Standard
487.1-2014 - IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation EquipmentWorkable methods for protecting wire-line telecommunication circuits entering electric supply locations are presented. The electric supp ... active Standard
493-1980 - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book)Superseded. The fundamentals of reliability analysis as it applies to the planning and design of industrial and commercial electric powe ... superseded Standard
493-1990 - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power SystemsThe fundamentals of reliability analysis as it applies to the planning and design of industrial and commercial electric power distributi ... superseded Standard
493-1997 - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book)This IEEE Standars product is part of the Color Books family. The design of reliable industrial and commercial power distribution syste ... superseded Standard
493-2007 - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power SystemsThe objective of this book is to present the fundamentals of reliability analysis applied to the planning and design of industrial and c ... active Standard
499-1997 - IEEE Recommended Practice for Cement Plant Electric Drives and Related Electrical EquipmentAll electric drives, including motors and control wiring associated with machinery or equipment commonly used in the manufacturing areas ... active Standard
515-1989 - IEEE Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial ApplicationsIEEE Std 515-1989, IEEE Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracin ... superseded Standard
515-1997 - IEEE Standard for the Testing, Design, Installation and Maintenance of Electrical Resistance Heat Tracing for Industrial ApplicationsThe specific test requirements for qualifying electrical resistance heating cables for industrial service are provided, as well as the b ... superseded Standard
515-2004 - IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial ApplicationsSpecific testing requirements for qualifying electrical resistance heating cables and heating devices for use in industrial applications ... superseded Standard
515-2011 - IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial ApplicationsSpecific testing requirements for qualifying electrical resistance heating cables and heating devices for use in industrial applications ... superseded Standard
515.1-2005 - Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial ApplicationsSpecific test requirements for qualifying electrical resistance heat tracing for commercial service. A basis for electrical and thermal ... superseded Standard
518-1982 - IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External SourcesTechniques for the installation and operation of industrial controllers, so as to minimize the disturbing effects of electrical noise on ... withdrawn Standard
521-1976 - IEEE Standard Letter Designations for Radar-Frequency BandsRadar systems operate in frequency bands that since World War II have been identified by letter designations. Over a period of time thes ... superseded Standard
551-2006 - Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power SystemsThis recommended practice provides short-circuit current information including calculated short-circuit current duties for the applicati ... active Standard
602-1986 - IEEE Recommended Practice for Electric Systems in Health Care FacilitiesThese recommended practices will aid electrical systems designers in achieving safety of life and preservation of property through opera ... superseded Standard
602-1996 - IEEE Recommended Practice for Electric Systems in Health Care FacilitiesA recommended practice for the design and operation of electric systems in health care facilities is provided. The term health care faci ... superseded Standard
602-2007 - IEEE Recommended Practice for Electric Systems in Health Care FacilitiesA recommended practice for the design and operation of electric systems in health care facilities is provided. The term health care faci ... active Standard
623-1976 - IEEE Standard Graphic Symbols for Grid and Mapping Diagrams Used in Cable Television SystemsA list of graphic symbols for the designation of electrical, electronic, and pole line devices for layout drawings of cable television ( ... withdrawn Standard
625-1979 - IEEE Recommended Practices to Improve Electrical Maintenance and Safety in the Cement IndustrySuperseded by 625-1990. Assists in the effective application of relays and other devices for the protection of shunt capacitors used in ... superseded Standard
625-1990 - IEEE Recommended Practice to Improve Electrical Maintenance and Safety in the Cement IndustryPractices for improving electrical maintenance and safety in the cement industry are defined and recommended. These practices apply to a ... superseded Standard
625-2001 - IEEE Recommended Practice to Improve Electrical Maintenance and Safety in the Cement IndustryThese recommended practices are intended as a reference document for use by members of cement industry electrical maintenance department ... withdrawn Standard
739-1984 - IEEE Recommended Practice for Energy Conservation and Cost-Effective Planning in Industrial FacilitiesSuperseded by IEEE Std 739-1995 This recommended practice serves as an engineering guide for use in electrical design for energy conse ... superseded Standard
739-1995 - IEEE Recommended Practice for Energy Management in Industrial and Commercial FacilitiesThis recommended practice serves as an engineering guide for use in electrical design for energy conservation. It provides a standard de ... active Standard
802.1Qat-2010 - IEEE Standard for Local and metropolitan area networks--Virtual Bridged Local Area Networks Amendment 14: Stream Reservation Protocol (SRP)This amendment specifies protocols, procedures, and managed objects, usable by existing higher layer mechanisms, that allow network reso ... superseded Standard
802.1Qau-2010 - IEEE Standard for Local and Metropolitan Area Networks-- Virtual Bridged Local Area Networks Amendment 13: Congestion NotificationThis amendment specifies protocols, procedures and managed objects that support congestion management of long-lived data flows within ne ... superseded Standard
802.1Qbf-2011 - IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 19: PBB-TE Infrastructure Segment ProtectionThis amendment to IEEE Std 802.1Q-2011 specifies localized protection of selected Traffic Engineered Service Instances traversing a comm ... superseded Standard
802.1AR-2009 - IEEE Standard for Local and metropolitan area networks - Secure Device IdentityA secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. Locall ... active Standard
841-1986 - IEEE Recommended Practice for Chemical Industry Severe Duty Squirrel-Cage Induction Motors-600 V and BelowThis standard applies to high-efÞciency TEFC, horizontal and vertical, single-speed, squirrel cage polyphase induction motors, up to an ... superseded Standard
841-1994 - IEEE Standard for Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 500 hpThis standard applies to high-efficiency TEFC, horizontal and vertical, single-speed, squirrel cage polyphase induction motors up to and ... superseded Standard
841-2001 - IEEE Standard for Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 370 kW (500 hp)This standard applies to high-efficiency TEFC, horizontal and vertical, single-speed, squirrel cage polyphase induction motors up to and ... superseded Standard
841-2009 - IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)This standard applies to premium efficiency totally enclosed fan-cooled (TEFC), horizontal and vertical, single-speed, squirrel cage pol ... active Standard
902-1998 - IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book)This IEEE Standards product is part of the Color Books family. The IEEE Yellow Book provides plant engineers with a reference source for ... active Standard
945-1984 - IEEE Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and TechnologyRecommendations are made to aid in the selection of metric units, so as to promote uniformity in the use of metric units and to limit th ... active Standard
953-1956 - AIEE Grounding of Industrial Power SystemsThe question of whether or not to ground a power system is one which must be faced sometime by most engineers charged with planning indu ... withdrawn Standard
991-1986 - IEEE Standard for Logic Circuit DiagramsThis standard provides guidelines for preparation of diagrams depicting logic functions. It includes deÞnitions, requirements for assig ... active Standard
995-1987 - IEEE Recommended Practice for Efficiency Determination of Alternating-Current Adjustable Speed Drives: Part I - Load Commutated Inverter Synchronous Motor DrivesThis recommended practice proposes a method for determining the efficiency of large, adjustable-speed AC motor-drive systems consisting ... withdrawn Standard
1015-1997 - IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power SystemsSuperseded by IEEE Std 1015-2006 Information is provided for selecting the proper circuit breaker for a particular application. This re ... superseded Standard
1015-2006 - IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power SystemsInformation is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the appli ... active Standard
1015-2006/Cor 1-2007 - IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - Corrigendum 1To correct technical omission/errors to IEEE Std 1015™-2006 Chapter 4 4.12 Normative references Annex 7A (informative) MCCB or MCP da ... active Standard
1017-1985 - IEEE Recommended Practice for Field Testing Electric Submersible Pump CableThis document presents procedures and test voltage values for acceptance and maintenance testing of ESP cable systems. It applies to cab ... superseded Standard
1017-1991 - IEEE Recommended Practice for Field Testing Electric Submersible Pump CableWithdrawn Standard. Withdrawn Date: Dec 09, 1997. No longer endorsed by the IEEE. Revision of IEEE Std 1017-1985 Procedures and test ... withdrawn Standard
1017-2004 - IEEE Recommended Practice for Field Testing Electric Submersible Pump CableProcedures and test voltage values for acceptance and maintenance testing of electrical submersible pump (ESP) cable systems are present ... superseded Standard
1018-1985 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene Propylene Rubber InsulationThis recommended practice establishes requirements for a three-conductor round-type oil-well cable used in supplying three-phase ac elec ... superseded Standard
1018-1991 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber InsulationIn this standard minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cabl ... withdrawn Standard
1018-2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber InsulationMinimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. ... superseded Standard
1019-1985 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene InsulationThis recommended practice establishes requirements for a three-conductor round-type oil well cable used in supplying three-phase ac elec ... superseded Standard
1019-1991 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene InsulationSuperseded by IEEE Std 1019-2004 Minimum requirements for the construction, manufacturing, purchasing, and application of electric sub ... withdrawn Standard
1019-2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene InsulationMinimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. ... superseded Standard
1068-1990 - IEEE Recommended Practice for Repair and Rewinding of Motors for the Petroleum and Chemical IndustryGeneral recommendations are provided for users of motors that need repair as well as owners and operators of establishments that offer m ... superseded Standard
1068-2009 - IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process IndustriesThis standard is intended to be a basic or primary document that can be utilized and referenced by owners of ac motors and generators (m ... superseded Standard
1076-1987 - IEEE Standard VHDL Language Reference ManualSuperseded by 1076-2002. IEEE standard VHDL language reference manual. superseded Standard
1076-1993 - IEEE Standard VHDL Language Reference ManualAiding in the comprehension and use of IEEE VHDL, this unique product offers a comprehensive & reliable tutorial on VHDL - not avail ... superseded Standard
1076-2000 - IEEE Standard VHDL Language Reference Manual" VHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notationintended for use in all phases of the creation of elec ... superseded Standard
1076-2002 - IEEE Standard VHDL Language Reference ManualReplaced by 61691-1-1 Dual-logo document. Revision of the IEEE Std 1076, 2000 Edition Abstract: VHSIC Hardware Description Language (VH ... superseded Standard
1076.1-1999 - IEEE Standard VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digita ... superseded Standard
1076.1-2007 - IEEE Standard VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digita ... superseded Standard
1076.1-2017 - IEEE Draft Standard VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digita ... active Standard
1076.1.1-2004 - IEEE Standard VHDL Analog and Mixed-Signal Extensions---Packages for Multiple Energy Domain SupportThis standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1TM-1999, along with recommendations for confo ... superseded Standard
1076.1.1-2011 - IEEE Standard for VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain SupportThis standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1, along with recommendations for conforming u ... active Standard
1076.2-1996 - IEEE Standard VHDL Mathematical PackagesThe MATH_REAL package declaration, the MATH_COMPLEX package declaration, and the semantics of the standard mathematical definition and c ... superseded Standard
1076.3-1997 - IEEE Standard VHDL Synthesis PackagesThe current interpretation of common logic values and the association of numeric values to specific VHDL array types is described. This ... superseded Standard
1076.4-1995 - IEEE Standard VITAL Application-Specific Integrated Circuit (ASIC) Modeling SpecificationSuperseded by 1076.4-2000. The VITAL (VHDL Initiative Towards ASIC Libraries) ASIC Modeling Specification is defined. It creates a meth ... superseded Standard
1076.4-2000 - IEEE Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling SpecificationIEC 61691-5: 2004 Dual-logo document replaces IEEE Std 1076.4-2000 (Revision of IEEE Std 1076.4-1995). ... withdrawn Standard
1076.6-1999 - IEEE Standard for VHDL Register Transfer Level SynthesisA standard syntax and semantics for VHDL register transfer level (RTL) synthesis is defined. The subset of IEEE 1076 (VHDL) that is suit ... superseded Standard
1076.6-2004 - IEEE Standard for VHDL Register Transfer Level (RTL) SynthesisThis document specifies a standard for use of very high-speed integrated circuit hardware description language (VHDL) to model synthesiz ... withdrawn Standard
1076c-2007 - IEEE Standard VHDL Language Reference Manual - Procedural Language Application InterfaceThe scope of the proposed project is to amend the existing IEEE 1076-2002 (VHDL) standard by adding a simulation runtime application int ... superseded Standard
1095-1989 - IEEE Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric ApplicationsThis standard describes installation procedures for synchronous generators and generator/motors rated 5000 kVA and above, to be coupled ... superseded Standard
1100-1992 - IEEE Recommended Practice for Powering and Grounding Sensitive Electronic EquipmentSuperseded by IEEE Std 1100-1999. Recommended design, installation, and maintenance practices for electrical power and grounding (includ ... superseded Standard
1100-1999 - IEEE Recommended Practice for Powering and Grounding Electronic EquipmentSuperseded by IEEE Std 1100-2005 Abstract: Recommended design, installation, and maintenance practices for electrical powerand groundin ... superseded Standard
1100-2005 - IEEE Recommended Practice for Powering and Grounding Electronic EquipmentThe IEEE Emerald Book(TM) presents a collection of consensus best practices for thepowering and grounding of electronic equipment used i ... active Standard
1164-1993 - IEEE Standard Multivalue Logic System for VHDL Model Interoperability (Std_logic_1164)This standard is embodied in the Std_logic_1164 package declaration and the semantics of the Std_logic_1164 body. An annex is provided t ... superseded Standard
1268-2016 - IEEE Guide for Safety in the Installation of Mobile Substation EquipmentInformation pertaining to the installation of mobile substation equipment up to 245 kV is provided in this guide. active Standard
1278-1993 - IEEE Standard for Information Technology -- Protocols for Distributed Interactive Simulation Applications--Entity Information and InteractionSuperseded. Revision was redesignated 1278.1. Data messages, called protocol data units (PDUs), that are exchanged between simulation a ... superseded Standard
1278.1a-1998 - IEEE Standard for Distributed Interactive Simulation Application ProtocolsData messages, known as protocol data units (PDUs), that are exchanged on a network between simulation applications are defined. These P ... superseded Standard
1278.3-1996 - IEEE Recommended Practice for Distributed Interactive Simulation - Exercise Management and FeedbackGuidelines are established for exercise management and feedback in Distributed Interactive Simulation (DIS) exercises. Guidance is provi ... active Standard
1278.4-2003 - IEEE Recommended Practice for Distributed Interactive Simulation -- Verification, Validation, and AccreditationGuidelines are established for the verification, validation, and accreditation (VV&A) of distributed interactive simulation (DIS) exerci ... active Standard
1346-1998 - IEEE Recommended Practice for Evaluating Electric Power System Compatibility With Electronic Process EquipmentA standard methodology for the technical and financial analysis of voltage sag compatibility between process equipment and electric powe ... withdrawn Standard
1349-2001 - IEEE Guide for Application of Electric Motors in Class I, Division 2 Hazardous (Classified) LocationsThis guide was developed to assist individuals, organizations, and suppliers with the application of motors in Class I, Division 2 locat ... superseded Standard
1349-2011 - IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) LocationsThree-phase and single-phase AC synchronous and induction electric motors in ratings 0.18 kW (1/4 hp) and larger are covered in this gui ... active Standard
1364-1995 - IEEE Standard Hardware Description Language Based on the Verilog(R) Hardware Description LanguageThe Verilog Hardware Description Language (HDL) is defined. Verilog HDL is a formal notation intended for use in all phases of the creat ... superseded Standard
1364-2005 - IEEE Standard for Verilog Hardware Description LanguageThe Verilog hardware description language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all ph ... superseded Standard
1417-1996 - ANSI/AAMI EC13-1992 - Cardiac Monitors, Heart Rate Meters, and AlarmsThis standard establishes minimum safety and performance requirements for electrocardiographic (ECG) heart rate and waveform monitors th ... withdrawn Standard
1426-1996 - ANSI/AAMI EC11-1991 - Diagnostic Electrocardiographic DevicesThis standard establishes minimum safety and performance requirements for electrocardiographic (ECG) systems with direct working devices ... withdrawn Standard
1458-2005 - IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial ApplicationsA recommended procedure for the selection, application, and determination of the remaining life in molder case circuit breaker is provided. superseded Standard
1481-1999 - IEEE Standard for Integrated Circuit (IC) Delay and Power Calculation SystemWays for integrated circuit designers to analyze chip timing and power consistently across a broad set of electric design automation (ED ... superseded Standard
1481-2009 - IEEE Standard for Integrated Circuit (IC) Open Library Architecture (OLA)Ways for integrated circuit designers to analyze chip timing and power consistently across a broad set of electric design automation (ED ... active Standard
1497-2001 - IEEE Standard for Standard Delay Format (SDF) for the Electronic Design ProcessIEC 61523-3: 2004 Dual-logo document. Replaces IEEE Std 1497-2001. The Standard Delay Format (SDF) is defined in this standard. SDF is a ... active Standard
1499-1998 - IEEE Standard Interface for Hardware Description Models of Electronic ComponentsThe standard interface for hardware description models of electronic components is de-fined. The primary audiences of this standard are ... withdrawn Standard
1505-2010 - IEEE Standard for Receiver Fixture InterfaceA mechanical and electrical specification for implementing a common interoperable mechanical quick-disconnect interconnect system for us ... active Standard
1580-2001 - IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating PlatformsRequirements are given for single or multiconductor cables, with or without metal armorand/or jacket, and rated 300 V to 35 kV, intended ... superseded Standard
1647-2006 - Standard for the Functional Verification Language 'e'The e functional verification language is an application-specific programming language, aimed at automating the task of verifying an ele ... superseded Standard
1647-2008 - IEEE Standard for the Functional Verification Language eThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hard ... superseded Standard
1647-2011 - IEEE Standard for the Functional Verification Language eThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hard ... superseded Standard
1647-2016 - IEEE Standard for the Functional Verification Language eThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hard ... active Standard
1666-2005 - IEEE Standard SystemC(R) Language Reference ManualSystemC(R) is defined in this standard. SystemC(R) is an ANSI standard C++ class library for system and hardware design for use by desi ... superseded Standard
1666-2011 - IEEE Standard for Standard SystemC Language Reference ManualSystemC(R) is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designer ... active Standard
1666.1-2016 - IEEE Standard for Standard SystemC(R) Analog/Mixed-Signal Extensions Language Reference ManualThe SystemC(R) Analog/Mixed-Signal (AMS) extensions are defined in this standard. SystemC AMS is an ANSI standard C++ class library for ... active Standard
1668-2017 - IEEE Approved Draft Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 VIEEE P1668 is a non-industry-specific trial use recommended practice for voltage sag and short interruption ride-through performance and ... active Standard
1685-2009 - IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsConformance checks for extensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. Th ... superseded Standard
1685-2014 - IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsConformance checks for eXtensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. Th ... active Standard
1709-2010 - IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on ShipsGuidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maint ... active Standard
1734-2011 - IEEE Standard for Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) DesignsA standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model f ... active Standard
1735-2014 - IEEE Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP)Guidance on technical protection measures to those who produce, use, process, or standardize the specifications of electronic design int ... active Standard
1735-2014/Cor 1-2015 - IEEE Approved Draft Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP) - Corrigendum 1: Correction to Rights Digest DescriptionCorrect an inconsistency within 7.4.3 of IEEE Std 1735-2014. The section contains a description of a rights digest followed by details o ... superseded Standard
1786-2011 - IEEE Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear FacilitiesThe application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this ... active Standard
1800-2005 - IEEE Standard for SystemVerilog: Unified Hardware Design, Specification and Verification LanguageThis standard represents a merger of two previous standards: IEEE 1364-2005 Verilog hardware description language (HDL) and IEEE 1800-20 ... superseded Standard
1800-2009 - IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification LanguageThis standard represents a merger of two previous standards: IEEE Std 1364(TM)-2005 Verilog hardware description language (HDL) and IEEE ... superseded Standard
1800-2012 - IEEE Standard for SystemVerilog--Unified Hardware Design, Specification, and Verification LanguageThe definition of the language syntax and semantics for SystemVerilog, which is a unified hardware design, specification, and verificati ... active Standard
1800.2-2017 - IEEE Standard for Universal Verification Methodology Language Reference ManualThe Universal Verification Methodology (UVM) that can improve interoperability, reduce the cost of using intellectual property (IP) for ... active Standard
1801-2009 - IEEE Standard for Design and Verification of Low Power Integrated CircuitsThe power supplied to elements in an electronic design affects the way circuits operate. Although this is obvious when stated, today’s ... superseded Standard
1801-2013 - IEEE Standard for Design and Verification of Low-Power Integrated CircuitsA method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the ... superseded Standard
1801-2015 - IEEE Standard for Design and Verification of Low-Power, Energy-Aware Electronic SystemsA method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the ... active Standard
1801a-2014 - IEEE Standard for Design and Verification of Low-Power Integrated Circuits--Amendment 1The set of changes required to address technical and editorial errors that have been identified in IEEE Std 1801-2013 are specified in t ... superseded Standard
1850-2005 - IEEE Standard for Property Specification Language (PSL)Replaced by 62531(E):2007. The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for spec ... superseded Standard
1850-2010 - IEEE Standard for Property Specification Language (PSL)The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic sys ... active Standard
1873-2015 - IEEE Standard for Robot Map Data Representation for NavigationA map data representation of environments of a mobile robot performing a navigation task is specified in this standard. It provides data ... active Standard
2401-2015 - IEEE Standard Format for LSI-Package-Board Interoperable DesignA method is provided for specifying a common interoperable format for electronic systems design. The format provides a common way to spe ... active Standard
2755-2017 - IEEE Guide for Terms and Concepts in Intelligent Process AutomationAn all-new family of software-based intelligent process automation technologies has emerged recently. Because of the newness of this kin ... active Standard
3001.11-2017 - IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power SystemsThe selection and application of controllers and automation to industrial and commercial power systems is covered by this recommended pr ... active Standard
3003.2-2014 - IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power SystemsThe grounding and bonding of equipment in industrial and commercial power systems is covered in this recommended practice. The interconn ... active Standard
3004.1-2013 - IEEE Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power SystemsThe selection and application of instrument transformers used in industrial and commercial power systems are covered in this recommended ... active Standard
3004.8-2016 - IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power SystemsThe protection of motors used in industrial and commercial power systems is covered. It is likely to be of greatest value to the power-o ... active Standard
3006.9-2013 - IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power SystemsCollection of data for use in reliability, availability, and maintainability assessments of industrial and commercial power systems is d ... active Standard
15026-2-2011 - IEEE Standard--Adoption of ISO/IEC 15026-2:2011 Systems and Software Engineering--Systems and Software Assurance--Part 2: Assurance CaseISO/IEC 15026-2:2011 is adopted by this standard. ISO/IEC 15026-2:2011 specifies minimum requirements for the structure and contents of ... active Standard
15288.1-2014 - IEEE Standard for Application of Systems Engineering on Defense ProgramsThe requirements for the application of ISO/IEC/IEEE 15288, System Life Cycle Processes for defense systems engineering needs are provid ... active Standard
61523-3-2004 - IEC 61523-3 Ed.1 (IEEE Std 1497™-2001): Delay and Power Calculation Standards - Part 3: Standard Delay Format (SDF) for the Electronic Design ProcessThe Standard Delay Format (SDF) is defined in this standard. SDF is a textual file format for representing the delay and timing informat ... active Standard
61523-4-2015 - IEEE/IEC International Standard - Design and Verification of Low-Power Integrated CircuitsA method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the ... active Standard
61671-2-2016 - IEC/IEEE International Standard for Automatic Test Markup Language (ATML) Instrument DescriptionAn exchange format is specified in this standard, using extensible markup language (XML), for identifying instrumentation that may be in ... active Standard
61671-4-2016 - IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test ConfigurationAn exchange format is specified in this standard, using extensible markup language (XML), for identifying the test configuration used to ... active Standard
61691-1-1-2011 - IEC/IEEE International Standard - Behavioural languages - Part 1-1: VHDL Language Reference ManualAdoption of IEEE Std 1076-2008. VHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notation intended for use in all ... active Standard
61691-4-2004 - IEC 61691-4 Ed.1 (IEEE Std 1364™-2001): Behavioural Languages - Part 4: Verilog(C) Hardware Description LanguageThe Verilog(R) Hardware Description Language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all ... withdrawn Standard
61691-5-2004 - IEC 61691-5 Ed.1 (IEEE Std 1076.4™-2000): Behavioural Languages - Part 5: Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling SpecificationIEC 61691-5: 2004 Dual-logo document. Will replace IEEE Std 1076.4-2000. The VITAL (VHDL Initiative Towards ASIC Libraries) ASIC Modeli ... withdrawn Standard
61691-6-2009 - Behavioural languages - Part 6: VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digita ... active Standard
61691-7-2009 - Behavioural languages - Part 7: SystemC Language Reference ManualSystemC is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers a ... active Standard
62014-4-2015 - IEEE/IEC International Standard - IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsThis standard enables the creation and exchange of IP in a highly automated design environment active Standard
62014-5-2015 - IEEE/IEC International Standard - Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) DesignsA standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model f ... active Standard
62050-2005 - IEC 62050 Ed. 1 (IEEE Std 1076.6™-2004): IEEE Standard for VHDL Register Transfer Level (RTL) SynthesisReplaces IEEE Std 1076.6-2004 / Dual logo standard This document specifies a standard for use of very high-speed integrated circuit hard ... withdrawn Standard
62243-2010 - IEC 62243:2012(E) (IEEE Std 1232-2010): Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)Data interchange and standard software services for test and diagnostic environments are defined by Artificial Intelligence Exchange and ... active Standard
62531-2012 - IEC 62531:2012(E) (IEEE Std 1850-2010): Standard for Property Specification Language (PSL)The IEEE Property Specification Language (PSL) is defined. PSL is a formal notation for specification of electronic system behavior, com ... active Standard
63003-2015 - IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™This standard represents an extension to the IEEE 1505 receiver fixture interface (RFI) standard specification. Particular emphasis is p ... active Standard
C37.017-2010 - IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated SwitchgearThis standard is applicable to bushings intended for use in high-voltage circuit breakers and gas-insulated switchgear. These bushings a ... active Standard
C37.302-2015 - IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V ACThe testing of fault current limiters (FCLs) operating on condition-based impedance increase for AC systems 1000 V and above is describe ... active Standard
C57.17-2012 - IEEE Standard Requirements for Arc Furnace TransformersThe electrical characteristics and mechanical features of liquid-immersed transformers 69 kV or less (but not limited to 69 kV), used fo ... active Standard
C57.106-2006 - IEEE Guide for Acceptance and Maintenance of Insulating Oil in EquipmentRecommendations regarding oil tests and evaluation procedures are made in this guide; references are made to methods of reconditioning a ... superseded Standard
C62.42.0-2016 - IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--OverviewSurge-protective components (SPCs) used in power and telecom surge-protective devices (SPDs) and equipment ports are covered in the C62. ... active Standard
C62.72-2016 - IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power CircuitsGuidance is provided to specifiers, users and manufacturers of surge-protective devices (SPDs) about the application considerations of S ... active Standard
C95.1a-1998 - IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GH - SupplementGives recommendations to prevent harmful effects in human beings exposed to electromagnetic fields in the frequency range from 3 kHz to ... superseded Standard
N42.28-2002 - American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray MeasurementsThe need for accurately measuring radioactivity in-situ for a variety of detector characterization techniques requires that performance ... active Standard
N42.53-2013 - American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland SecurityThe operational and performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security application ... active Standard
SI 10-1997 - IEEE/ASTM Standard for Use of the International System of Units (SI): The Modern Metric SystemGuidance for the use of the modern metric system is given. Known as the International System of Units (abbreviated SI), the system is in ... superseded Standard
SI_10-2010 - American National Standard for Metric Practiceconversion factors, International System, International System of Units, metric practice, metric system, rounding, SI, SI 10, Systeme In ... superseded Standard
IEEE 3006HistoricalData-2012-2012 - Historical Reliability Data for IEEE 3006 Standards: Power Systems ReliabilityAn IEEE sponsored survey of Electrical Equipment reliability in industrial plants was completed during 1972. The results are reported fr ... active Standard