Project Icon

Industry Applications Standards

Displaying results 1 - 40 of 101
1 2 3
Industry Applications Standards
141-1993 - IEEE Recommended Practice for Electric Power Distribution for Industrial PlantsThis IEEE Standards product is part of the Color Books family. A thorough analysis of basic electrical-systems considerations is present ... active Standard
142-2007 - IEEE Recommended Practice for Grounding of Industrial and Commercial Power SystemsThe problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, a ... active Standard
176-1987 - IEEE Standard on PiezoelectricityWithdrawn Standard. No abstract. withdrawn Standard
241-1990 - IEEE Recommended Practice for Electric Power Systems in Commercial BuildingsThis IEEE Standards product is part of the Color Books family. A guide and general reference on electrical design for commercial buildin ... active Standard
242-2001 - IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)This IEEE Standards product is part of the Color Books family. System protection and coordination serve to minimize damage to a system a ... active Standard
261-1965 - IEEE Letter Symbols for Thermoelectric DevicesThis document presents standard letter symbols for quantities used in the field of thermoelectric devices. active Standard
270-2006 - IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)The definitions for physical quantities and units commonly used in applied science and technology, and for related terms that concern sy ... active Standard
277-2007 - IEEE Recommended Practice for Cement Plant Power DistributionThis document has been developed as a recommended practice for electrical distribution systems in cement plants with the objective of sa ... active Standard
280-1985 - IEEE Standard Letter Symbols for Quantities Used in Electrical Science and Electrical EngineeringLetter symbols used to represent physical quantities in the field of electrical science and electrical engineering are defined. The symb ... active Standard
315-1975 - IEEE Standard for Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)A list of graphic symbols and class designation letters for use on electrical and electronics diagrams is provided. All of the symbols a ... active Standard
399-1997 - IEEE Recommended Practice for Industrial and Commercial Power Systems Analysis (Brown Book)This IEEE Standards product is part of the Color Books family. Today’s intensely competitive business environment forces plant and bui ... active Standard
421.4-2014 - IEEE Guide for the Preparation of Excitation System SpecificationsThis guide is intended to provide to the specification writer the information to prepare a specification for the purchase of an excitati ... active Standard
425-1957 - AIEE Test Code for Transistors - Semiconductor Definitions and Letter SymbolsTest code for Transistors - semiconductor definitions and letter symbols. withdrawn Standard
444-1973 - IEEE Standard Practices and Requirements for Thyristor Converters for Motor Drives Part 1- Converters for DC Motor Armature SuppliesThis standard applies to all types of line-commutated semiconductor power converters employing monocrystalline semiconductor thyristors ... withdrawn Standard
446-1995 - IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial ApplicationsThis Recommended Practice addresses the uses, power sources, design, and maintenance of emergency and standby power systems. Chapter 3 ... active Standard
463-1993 - IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working ZonesMeans of safeguarding personnel while operating or maintaining equipment located in electrolytic cell line working zones are provided. I ... withdrawn Standard
487.1-2014 - IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation EquipmentWorkable methods for protecting wire-line telecommunication circuits entering electric supply locations are presented. The electric supp ... active Standard
493-2007 - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power SystemsThe objective of this book is to present the fundamentals of reliability analysis applied to the planning and design of industrial and c ... active Standard
499-1997 - IEEE Recommended Practice for Cement Plant Electric Drives and Related Electrical EquipmentAll electric drives, including motors and control wiring associated with machinery or equipment commonly used in the manufacturing areas ... active Standard
518-1982 - IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External SourcesTechniques for the installation and operation of industrial controllers, so as to minimize the disturbing effects of electrical noise on ... withdrawn Standard
551-2006 - Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power SystemsThis recommended practice provides short-circuit current information including calculated short-circuit current duties for the applicati ... active Standard
602-2007 - IEEE Recommended Practice for Electric Systems in Health Care FacilitiesA recommended practice for the design and operation of electric systems in health care facilities is provided. The term health care faci ... active Standard
623-1976 - IEEE Standard Graphic Symbols for Grid and Mapping Diagrams Used in Cable Television SystemsA list of graphic symbols for the designation of electrical, electronic, and pole line devices for layout drawings of cable television ( ... withdrawn Standard
625-2001 - IEEE Recommended Practice to Improve Electrical Maintenance and Safety in the Cement IndustryThese recommended practices are intended as a reference document for use by members of cement industry electrical maintenance department ... withdrawn Standard
739-1995 - IEEE Recommended Practice for Energy Management in Industrial and Commercial FacilitiesThis recommended practice serves as an engineering guide for use in electrical design for energy conservation. It provides a standard de ... active Standard
841-2009 - IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)This standard applies to premium efficiency totally enclosed fan-cooled (TEFC), horizontal and vertical, single-speed, squirrel cage pol ... active Standard
902-1998 - IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book)This IEEE Standards product is part of the Color Books family. The IEEE Yellow Book provides plant engineers with a reference source for ... active Standard
945-1984 - IEEE Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and TechnologyRecommendations are made to aid in the selection of metric units, so as to promote uniformity in the use of metric units and to limit th ... active Standard
953-1956 - AIEE Grounding of Industrial Power SystemsThe question of whether or not to ground a power system is one which must be faced sometime by most engineers charged with planning indu ... withdrawn Standard
991-1986 - IEEE Standard for Logic Circuit DiagramsThis standard provides guidelines for preparation of diagrams depicting logic functions. It includes deÞnitions, requirements for assig ... active Standard
995-1987 - IEEE Recommended Practice for Efficiency Determination of Alternating-Current Adjustable Speed Drives: Part I - Load Commutated Inverter Synchronous Motor DrivesThis recommended practice proposes a method for determining the efficiency of large, adjustable-speed AC motor-drive systems consisting ... withdrawn Standard
1015-2006 - IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power SystemsInformation is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the appli ... active Standard
1015-2006/Cor 1-2007 - IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - Corrigendum 1To correct technical omission/errors to IEEE Std 1015™-2006 Chapter 4 4.12 Normative references Annex 7A (informative) MCCB or MCP da ... active Standard
1017-1991 - IEEE Recommended Practice for Field Testing Electric Submersible Pump CableWithdrawn Standard. Withdrawn Date: Dec 09, 1997. No longer endorsed by the IEEE. Revision of IEEE Std 1017-1985 Procedures and test ... withdrawn Standard
1018-1991 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber InsulationIn this standard minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cabl ... withdrawn Standard
1019-1991 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene InsulationSuperseded by IEEE Std 1019-2004 Minimum requirements for the construction, manufacturing, purchasing, and application of electric sub ... withdrawn Standard
1076.1-2017 - IEEE Standard VHDL Analog and Mixed-Signal ExtensionsThe IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digital, and mixed-signal sy ... active Standard
1076.4-2000 - IEEE Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling SpecificationIEC 61691-5: 2004 Dual-logo document replaces IEEE Std 1076.4-2000 (Revision of IEEE Std 1076.4-1995). ... withdrawn Standard