Standard Icon

Electromagnetic Compatibility Standards

Standard Name
Status Help less all
139-1988 - Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's PremisesDescribes equipment inspection and radio frequency (RF) electromagnetic field measurement procedures for evaluation of RF industrial, scientific,... Active Standard
140-1950 - Recommended Practice for Minimization of Interference from Radio-Frequency Heating EquipmentRules and regulations by the Federal Communications Commission governing radiation from industrial radio-frequency heating equipment have created... Superseded Standard
140-1990 - Recommended Practice for Minimization of Interference from Radio-Frequency Heating EquipmentIEEE Std 140-1990, Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment, describes procedures that may be... Withdrawn Standard
145-1983 - Standard Definitions of Terms for AntennasIt is assumed in this standard that an antenna is a passive linear reciprocal device. Thus, where a definition implies the use of an antenna in a... Superseded Standard
145-1993 - Standard Definitions of Terms for AntennasDefinitions of terms in the field of antennas are provided. Keywords: antennas, definitions, propagation, terminology Superseded Standard
145-2013 - Definitions of Terms for AntennasDefinitions for antennas and for systems that incorporate an antenna as a component of the system are established in this standard. Active Standard
147-1979 - Standard Definitions of Terms for Waveguide ComponentsThis standard presents definition of components in waveguide usage. These components are considered to be linear, passive, and reciprocal unless... Withdrawn Standard
149-1977 - Standard Test Procedures for AntennasThis standard is used throughout government, industry and academia in the area of antenna testing. It provides many of the procedures currently... Active Standard
187-1990 - Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast ReceiversSpurious radiations from the local oscillator of modern broadcast radio receivers of the superheterodyne type are possible sources of interference... Superseded Standard
187-2003 - Standard Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9kHz to 40GHzIEEE Std 187-2003 is the standard for measurement methods of emissions from FM and television broadcast receivers in the frequency range of 9 kHz... Active Standard
211-1977 - Standard Definitions of Terms for Radio Wave PropagationSuperseded by 211-1990. Terms and definitions used in the context of electromagnetic wave propagation relating to the fields of telecommunications... Superseded Standard
211-1990 - Standard Definitions of Terms for Radio Wave PropagationThis standard identifies terms currently in use in the field of radiowave propagation. Standard definitions for those terms are established. Superseded Standard
211-1997 - Standard Definitions of Terms for Radio Wave PropagationTerms and definitions used in the context of electromagnetic wave propagation relating to the fields of telecommunications, remote sensing, radio... Active Standard
213-1987 - Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power LinesTelevision and FM broadcast receivers are frequently potential sources of interference to other television and FM broadcast receivers and to... Withdrawn Standard
272-1970 - Computer-Type (Square-Loop) Pulse TransformersThis standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a 'square-loop' core... Withdrawn Standard
291-1969 - Standards Report on Measuring Field Strength in Radio Wave PropagationMost measurements with which radio wave propagation is concerned involve the measurement of field strength. Thus, the determination of power... Superseded Standard
291-1991 - Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHzTwo standard methods for field-strength measurement are described. The standard-antenna method consists of measuring the received power or open... Withdrawn Standard
299-1991 - Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of room-sized, high-performance electromagnetic... Superseded Standard
299-1997 - Standard Method for Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at... Superseded Standard
299-2006 - Standard Method for Measuring the Effectiveness of Electromagnetic Shielding EnclosuresUniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at... Active Standard
299.1-2013 - Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 mThis standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety... Active Standard
302-1969 - Standard Methods for Measuring Electromagnetic Field Strength for Frequencies Below 1000 MHz in Radio Wave PropagationStandard methods for the measurement of electromagnetic field strength in radiowave propagation are described in detail. These are for frequencies... Withdrawn Standard
356-1974 - Guide for Radio Methods for Measuring Earth ConductivityThe guide presents a survey of radio techniques for measuring the electrical conductivity of the Earth. The results are applicable to the design... Withdrawn Standard
356-2001 - Guide for Measurements of Electromagnetic Properties of Earth MediaThe electromagnetic properties of the earth play an important role in the design and implementation of radio communications systems, geophysical... Superseded Standard
356-2010 - Guide for Measurements of Electromagnetic Properties of Earth MediaMeasurements of the electrical properties of naturally occurring solids are covered in the scope of this project. Not covered are methods that... Active Standard
376-1975 - the Measurement of Impulse Strength and Impulse BandwidthFor many purposes in radio interference and electromagnetic compatibility work, it has become convenient to measure broadband emission in terms of... Withdrawn Standard
377-1980 - Recommended Practice for Measurement of Spurious Emission from Land-Mobile Communication TransmittersThis recommended practice covers definitions of terms, controlled test conditions, test apparatus, test methods and data presentation, all of... Active Standard
430-1986 - Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and SubstationsThe primary purpose of this standard is to establish uniform procedures for the measurement of radio noise generated by corona from overhead power... Withdrawn Standard
469-1988 - Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution TransformersThe standard provides instruction for the testing of distribution transformers as sources of voice-frequency noise. These tests measure the degree... Withdrawn Standard
473-1985 - Recommended Practice for an Electromagnetic Site Survey (10 kHz to 10 GHz)An electromagnetic (EM) site survey is a systematic, documented investigation of the amplitudes of radio-frequency (RF) EM fields found at one or... Withdrawn Standard
475-2000 - Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHzTest procedures for microwave field disturbance sensors to measure radio frequency (RF) radiated field strength of the fundamental frequency,... Active Standard
518-1982 - Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External SourcesThis guide is limited to techniques for the installation of controllers and control systems so that proper operation can be achieved in the... Withdrawn Standard
644-1987 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power LinesEstablishes uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power... Withdrawn Standard
644-1994 - Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power LinesIn this IEEE Standard uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC)... Active Standard
1128-1998 - Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 5 GHzRealistic and repeatable criteria, as well as recommended test methods, for characterizing the absorption properties of typical anechoic chamber... Active Standard
1140-1994 - Standard Procedures for the Measurement of Electric and Magnetic Fields from Video Display Terminals (VDTs) from 5 Hz to 400 kHzProcedures for the measurement of electric and magnetic fields in close proximity to video display terminals (VDTs) in the frequency range of 5 Hz... Active Standard
1302-1998 - Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range DC to 18GHzInformation to assist users of gaskets in evaluating gasket measurement techniques to determine which reveal the properties critical to the... Superseded Standard
1302-2008 - Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHzInformation to assist users of gaskets in evaluating gasket measurement techniques to determine which exhibit the properties critical to the... Active Standard
1309-1996 - Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHzConsensus calibration methods for electromagnetic field sensors and field probes are provided. Data recording and reporting requirements are given... Superseded Standard
1309-2005 - Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHzConsensus calibration methods for electromagnetic (EM) field sensors and probes are provided. Data recording and reporting requirements are given,... Superseded Standard
1309-2013 - Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHzConsensus calibration methods for electromagnetic (EM) field sensors and probes are provided. Data recording and reporting requirements are given,... Active Standard
1453-2004 - Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power SystemsVoltage fluctuations on electric power systems sometimes give rise to noticeable illumination changes from lighting equipment. This phenomenon is... Withdrawn Standard
1453-2011 - Recommended Practice--Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC)--Testing and measurement techniques--Flickermeter--Functional and design specificationsIEC 61000-4-15:2010 is adopted by this standard. IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus... Active Standard
1453.1-2012 - Guide--Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)--Limits--Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systemsIEC/TR 61000-3-7:2008 is adopted by this guide. IEC 61000-3-7:2008 provides guidance on the principles that can be used as the basis for... Active Standard
1460-1996 - Guide for the Measurement of Quasi-Static Magnetic and Electric FieldsA listing of possible measurement goals related to characterizing quasi-static magnetic and electric fields and possible methods for their... Active Standard
1502-2007 - Recommended Practice for Radar Cross-Section Test ProceduresThis recommended practice describes the process of the measurement of the radar cross section of objects using a test range. The term "radar cross... Active Standard
1528-2003 - Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement TechniquesIEEE Std 1528-2003 specifies protocols and test procedures for the measurement of the peak spatial-average SAR induced inside a simplified model... Superseded Standard
1528-2013 - Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement TechniquesProtocols and test procedures are specified for the measurement of the peak spatial-average SAR induced inside a simplified model of the head of... Active Standard
1560-2005 - Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHzUniform methods of measurements of radio-frequency power-line interference filter attenuation performance in the range of 100 Hz to 10 GHz are set... Active Standard
1597.1-2008 - Validation of Computational Electromagnetics Computer Modeling and SimulationsA method to validate computational electromagnetics computer modeling and simulation techniques, codes, and models is defined in this standard. It... Active Standard
1597.2-2010 - Recommended Practice for Validation of Computational Electromagnetics Computer Modeling and SimulationsThis recommended practice is a companion document for IEEE Std 1597.1-2008. Examples and problem sets to be used in the validation of... Active Standard
1775-2010 - Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement MethodsElectromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication... Active Standard
1900.1-2008 - Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum ManagementThis standard provides definitions and explanations of key concepts in the fields of spectrum management, cognitive radio, policy-defined radio,... Active Standard
1900.2-2008 - Recommended Practice for the Analysis of In-Band and Adjacent Band Interference and Coexistence Between Radio SystemsTechnical guidelines are provided in this recommended practice for analyzing the coexistence or, alternatively, the interference between radio... Active Standard
1900.4-2009 - Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access NetworksThe building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the... Active Standard
C37.90.2-1987 - Trial-Use Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversEstablishes a common reference and test procedure for evaluating the performance of static protective and control relays used in electric power... Superseded Standard
C37.90.2-1995 - Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversA design test to evaluate the susceptibility of protective relays to single-frequency electromagnetic fields in the radio frequency domain, such... Superseded Standard
C37.90.2-2004 - Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from TransceiversDesign tests for relays and relay systems that relate to the immunity of this equipment to Radiated Electromagnetic Interference from Transceivers... Active Standard
C63.2-1987 - American National Instrumentation - Electromagnetic Noise and Field Strength, 10kHz to 40 GHz - SpecificationsThe increasing significance of electromagnetic compatibility considerations in the design and application of electrical and electronic equipment... Superseded Standard
C63.2-1996 - American National Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - SpecificationsElectromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, RMS, and average values for electrical and... Superseded Standard
C63.2-2009 - American National Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz SpecificationsElectromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and... Active Standard
C63.4-1988 - American National Standard Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 10 kHz to 1GHzUniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other... Superseded Standard
C63.4-1991 - American National Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzThis standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including... Superseded Standard
C63.4-1992 - Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzUniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other... Superseded Standard
C63.4-2001 - Interim Standard Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S.consensus standard methods,instrumentation,and facilities for measurement of radio-frequency (RF)signals, noise emitted from electrical,... Superseded Standard
C63.4-2003 - Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical... Active Standard
C63.4-2009 - American National Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzU.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical... Superseded Standard
C63.4-2014 - American National Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzANSI C63.4, conducted emission testing, conducting ground plane, digital equipment, electric field measurement, line impedance stabilization... Active Standard
C63.5-1998 - American National Calibration of Antennas Used for Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Superseded Standard
C63.5-2004 - American National Electromagnetic CompatibilityRadiated Emission Measurements in Electromagnetic Interference (EMI) ControlCalibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Superseded Standard
C63.5-2006 - American National Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz)Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40... Active Standard
C63.6-1988 - American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errorsShows the basis for the acceptability criterion of +or-14 dB for the site attenuation measurements required in ANSI C63.4-1988. This covers... Superseded Standard
C63.6-1996 - American National Standard Guide for the Computation of Errors in Open-Area Test Site MeasurementsThe basis for the acceptability criterion of /spl plusmn/4 dB for the site attenuation measurements required in ANSI C63.4-1992 is provided. Active Standard
C63.7-1992 - American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission MeasurementsInformation that is useful in constructing an open-area test site (OATS) used to perform radiated emission measurements in the frequency range of... Superseded Standard
C63.7-2005 - Standard Guide for Construction of Open Area Test Sites for Performing Radiated Emission MeasurementsInformation that is useful in constructing an open-area test site used to perform radiated emission measurements in the frequency range of 30 MHz... Active Standard
C63.9-2008 - American National RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 WattsThis standard provides recommended test methods and limits for assuring the radio frequency (RF) immunity of office equipment to general use... Active Standard
C63.10-2009 - American National Testing Unlicensed Wireless DevicesThis standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed... Superseded Standard
C63.10-2013 - American National Standard of Procedures for Compliance Testing of Unlicensed Wireless DevicesThe procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license... Active Standard
C63.011-2000 - American National Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency EquipmentThis standard republishes CISPR 11:1997 (with Amendment 1, 1999-05) as an American National Standard to make it easily available to U.S.... Active Standard
C63.12-1987 - American National Electromagnetic Compatibility Limits - Recommended PracticeThis standard set forth, at least for reference purposes, a suggested set of EMC limits which may find general applications. As part of the... Superseded Standard
C63.12-1999 - American National Electromagnetic Compatibility Limits--Recommended PracticeThis recommended practice presents a rationale for developing limits and recommends sets of limits that are representative of current practice.... Active Standard
C63.13-1991 - American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial UseA basic understanding of the application, evaluation, and safety considerations of electromagnetic interference (EMI) power-line filters used in... Active Standard
C63.14-1992 - American National Standard Dictionary for Technologies of Electromagnetic Compatability (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD)Terms associated with electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD) are defined. Quantities,... Superseded Standard
C63.14-1998 - American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP) and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP/ESD Terms and Definitions)Terms associated with electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD) are defined. Quantities,... Superseded Standard
C63.14-2009 - American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)Terms associated with electromagnetic compatibility (EMC) and electromagnetic environmental effects (E3) are defined in this standard, including... Superseded Standard
C63.14-2014 - American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)Terms associated with electromagnetic compatibility (EMC) and electromagnetic environmental effects (E3) are defined including electromagnetic... Active Standard
C63.15-2010 - American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic EquipmentThis immunity measurement and measurement instrumentation specification document complements the recommended procedures for making emission... Active Standard
C63.16-1993 - American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic EquipmentBased upon ESD events on electronic equipment in actual-use environments, a process to establish ESD test criteria is provided. Test procedures... Active Standard
C63.17-2006 - American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) DevicesSpecific test procedures are established for verifying the compliance of unlicensed personal communications services (UPCS) devices with... Superseded Standard
C63.17-2013 - American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) DevicesSpecific test procedures for verifying the compliance of unlicensed personal communications services (UPCS) devices (including wideband voice and... Active Standard
C63.18-1997 - American National Standard Recommended Practice for an On-site, Ad-Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio Frequency TransmittersGuidance is provided for health-care organizations in evaluating the radiated RF electromagnetic immunity of their existing inventories of medical... Withdrawn Standard
C63.18-2014 - American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF TransmittersA guide to evaluating electromagnetic immunity of medical devices against radiated radio-frequency (RF) emissions from common RF transmitters is... Active Standard
C63.19-2001 - American National Methods of Measurement of Capatibility between Wireless Communication Devices and Hearing AidsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth in this standard. Active Standard
C63.19-2006 - Method of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Active Standard
C63.19-2007 - American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. American national... Active Standard
C63.19-2011 - American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing AidsAvailable in PDF only. Uniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Active Standard
C63.022-1996 - American National Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology EquipmentEmission limits are provided that are an are acceptable alternative for limits of the current issue of FCC Part 15, Subpart B, for Information... Active Standard
C63.22-2004 - American National Standard Guide for Automated Electromagnetic Interference MeasurementsU.S. consensus guideline for automation of conducted and radiated EMI compliance measurements is provided in this guide. This document does not... Active Standard
C63.23-2012 - American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement UncertaintyMethods for estimating measurement uncertainty of emissions measurement results are provided, for use in conjunction with the basic methods of... Active Standard
C95.1-1982 - American National Standard Safety Level of safety levels with respect to human exposure to radio frequency electromagnetic fieldsJOO kHz to IO0 GHzRecommendations are made to prevent possible harmful effects in human beings exposed to electromagnetic fields in the frequency range from 300 kHz... Superseded Standard
C95.1-1991 - Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHzThis IEEE standard gives recommendations to prevent harmful effects in human beings exposed to electromagnetic fields in the frequency range from... Superseded Standard
C95.1-2005 - Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHzRecommendations to protect against harmful effects in human beings exposed to electromagnetic fields in the frequency range from 3 kHz to 300 GHz... Active Standard
C95.1-2345-2014 - Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHzRecommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric,... Active Standard
C95.1a-1998 - Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GH - SupplementGives recommendations to prevent harmful effects in human beings exposed to electromagnetic fields in the frequency range from 3 kHz to 300 GHz.... Superseded Standard
C95.1b-2004 - Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz - Amendment 2: Specific Absorption Rate (SAR) Limits for the PinnaThis Amendmendment modifies IEEE Std C95.1-1991, as amended by C95.1a-1998 by assigning the same SAR requirements to the outer ear (pinna) that... Superseded Standard
C95.2-1982 - American National Standard Radio Frequency Radiation Hazard Warning SymbolThis standard provides preferred voltage ratings above 230 kV nominal for alternating current systems and equipment. Superseded Standard
C95.2-1999 - Radio-Frequency Energy and Current-Flow SymbolsSymbols to inform people about the presence of potentially hazardous levels of radiofrequency energy or the presence of contact current hazards in... Active Standard
C95.3-1991 - Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and MicrowaveIEEE Std C95.3-1991 specifies techniques and instrumentation for the measurement of potentially hazardous electromagnetic fields. The... Superseded Standard
C95.3-2002 - Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHzTechniques and instrumentation for the measurement and computation of potentially hazardous electromagnetic (EM) fields both in the near field and... Active Standard
C95.3.1-2010 - Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 100 kHzTechniques and instrumentation for the measurement and computation of electric, magnetic, and electromagnetic (EM) fields in the near field of an... Active Standard
C95.4-2002 - Recommended Practice for Determining Safe Distances From Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive OperationsThis project provides recommended practices for the prediction and practical determination of safe distances from radio and radar transmitting... Active Standard
C95.5-1981 - American National Standard Recommended Practice for the Measurement of Hazardous Electromagnetic Fields - RF and MicrowaveThis recommended practice describes techniques and procedures for the measurement of potentially hazardous electromagnetic fields both in the near... Superseded Standard
C95.6-2002 - Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHzRecommendations are given to prevent harmful effects in human beings exposed to electromagnetic fields in the frequency range of 0-3 kHz. The... Active Standard
C95.7-2005 - Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHzElements of a radio frequency (RF) exposure safety program that can prevent or control potential risks associated with exposure to the... Superseded Standard
C95.7-2014 - Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHzElements of a radio frequency (RF) exposure safety program that provide reasonable and adequate guidance for preventing exposures in excess of... Active Standard