Standard Icon

Computer Technology Standards

Displaying results 41 - 80 of 296
Standard Name
Status Help less all
959-1988 - Standard Specifications for an I/O Expansion Bus: SBX BusThe IEEE 959 I/O expansion bus concept allows low-cost, highly flexible I/O expansion for computer boards. The specification describes the... Withdrawn Standard
961-1987 - an 8-Bit Microcomputer Bus System: STD BusThe standard provides specifications for applying 8-bit microprocessors to a low-cost modular busing scheme. The signals for this bus are... Withdrawn Standard
997-1985 - Standard Serial ASCII Instrumentation Loop (SAIL) Shipboard Data CommunicationThis standard was developed to provide a common digital methodology to access or exchange operational data aboard oceanographic research vessels.... Withdrawn Standard
1000-1987 - an 8-Bit Backplane Interface: STEbusMethods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission... Withdrawn Standard
1005-1991 - Standard Definitions and Characterization of Floating Gate Semiconductor ArraysAn introduction to the physics unique to this type of memory and an overview of typical array architectures are presented. The variations on the... Superseded Standard
1005-1998 - Definitions, Symbols, and Characterization of Floating Gate Memory ArraysSummary form only given. This standard describes the underlying physics and the operation of floating gate memory arrays, specifically, UV... Withdrawn Standard
1014-1987 - A Versatile Backplane Bus: VMEbusThis IEEE 1014 standard specifies a high-performance backplane bus for use in microcomputer systems that employ single or multiple microprocessors... Active Standard
1014.1-1994 - a Futurebus+(R)/VME64 BridgeThe following topics were dealt with: The logical protocol layer for bridging between a Futurebus+ system and a VME64 system in a tightly coupled... Withdrawn Standard
1029.1-1991 - Waveform and Vector Exchange (WAVES)The waveform and vector exchange specification (WAVES) is an application of the VHSIC hardware description language (VHDL). This standard covers... Superseded Standard
1029.1-1998 - VHDL Waveform and Vector Exchange (Waves) to Support Design and Test VerificationA report is given on the IEEE Standard for VHDL waveform and vector exchange to support design and test verification (WAVES) Language Reference... Withdrawn Standard
1076-1987 - Standard VHDL Language Reference ManualThe VHSIC Hardware Description Language (VHDL) is a formal notation intended for use in all phases of the creation of electronic systems. Because... Superseded Standard
1076-1993 - Standard VHDL Language Reference ManualThis standard defines the VHSIC Hardware Description Language (VHDL). VHDL is a formal notation intended for use in all phases of the creation of... Superseded Standard
1076-2000 - Standard VHDL Language Reference ManualVHSIC Hardware Description Language [VHDL] is defined. VHDL is a formal notation intended for use in all phases of the creation of electronic... Superseded Standard
1076-2002 - Standard VHDL Language Reference ManualVHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notation intended for use in all phases of the creation of electronic... Superseded Standard
1076-2008 - Standard VHDL Language Reference ManualVHSIC hardware description language (VHDL) is defined. VHDL is a formal notation intended for use in all phases of the creation of electronic... Active Standard
1076.1-1999 - Standard VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digital, and... Superseded Standard
1076.1-2007 - (Withdrawn)Standard VHDL Analog and Mixed-Signal ExtensionsThis standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digital, and... Active Standard
1076.1.1-2004 - Standard VHDL Analog and Mixed-Signal Extensions---Packages for Multiple Energy Domain SupportThis standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1-1999, along with recommendations for conforming use,... Superseded Standard
1076.1.1-2011 - VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain SupportThis standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1, along with recommendations for conforming use, in... Active Standard
1076.2-1996 - Standard VHDL Mathematical PackagesThe MATH-REAL package declaration, the MATH-COMPLEX package declaration, and the semantics of the standard mathematical definition and the... Superseded Standard
1076.3-1997 - Standard VHDL Synthesis PackagesThe current interpretation of common logic values and the association of numeric values to specific VHDL array types is described. This standard... Superseded Standard
1076.4-1995 - Standard VITAL Application-Specific Integrated Circuit (ASIC) Modeling SpecificationThe VITAL (VHDL Initiative Towards ASIC Libraries) ASIC Modeling Specification is defined. It creates a methodology that promotes the development... Superseded Standard
1076.4-2000 - Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling SpecificationThe VITAL (VHDL Initiative Towards ASIC Libraries)ASIC Modeling Specification is defined in this standard.This modeling specification defines a... Withdrawn Standard
1076.6-1999 - VHDL Register Transfer Level SynthesisA standard syntax and semantics for VHDL register transfer level (RTL) synthesis is defined. The subset of IEEE 1076 (VHDL) that is suitable for... Superseded Standard
1076.6-2004 - VHDL Register Transfer Level (RTL) SynthesisThis document specifies a standard for use of very high-speed integrated circuit hardware description language (VHDL) to model synthesizable... Withdrawn Standard
1076c-2007 - Standard VHDL Language Reference Manual - Procedural Language Application InterfaceThis amendment adds a simulation runtime application interface (VHDL Programming Interface or VHPI) to the existing base standard IEEE Std 1076-2002. Superseded Standard
1084-1986 - Standard Glossary of Mathematics of Computing TerminologyThis dictionary defines terms in the field of Mathematics of Computing. Topics covered include Boolean algebra, number systems, computer... Withdrawn Standard
1096-1988 - a Multiplexed High-Performance Bus Structure: VSBThe Subsystem Bus of the IEC 821 BUS is a local subsystem extension bus. It allows a processor board to access additional memory and I/O over a... Withdrawn Standard
1101-1987 - Mechanical Core Specifications for MicroprocessorsThe standard covers three areas: the basic dimensions of subracks, this range of modular subracks conforming to IEC 297-3-1984, for mounting in... Withdrawn Standard
1101.1-1991 - Mechanical Core Specifications for Microcomputers Using IEC 603-2 ConnectorsThe basic dimensions of a range of modular subracks conforming to IEC 297-3 (1984) for mounting in equipment according to IEC 297-1 (1986) and... Superseded Standard
1101.1-1998 - Mechanical Core Specifications for Microcomputers Using IEC 60603-2 ConnectorsThe basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment... Active Standard
1101.2-1992 - Mechanical Core Specifications for Conduction-Cooled EurocardsMechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is applicable... Active Standard
1101.3-1993 - Mechanical Conduction-Cooled and Air-Cooled 10 SU ModulesThe mechanical design requirements for conduction-cooled and air-cooled modules of the 10 SU by 6.375 in (161.9 mm) format are established. The... Withdrawn Standard
1101.4-1993 - Military Module, Format E Form FactorThe mechanical design requirements for a military module, format E form factor are established. The specifications of dimensions and tolerances... Withdrawn Standard
1101.7-1995 - Space Applications Module, Extended Height Format E Form FactorThe design requirements for a module designated for use in spacecraft, boosters, and other highly rugged, conductively cooled environments are... Withdrawn Standard
1101.10-1996 - Additional Mechanical Specifications for Microcomputers Using the 1101.1-1998 Equipment PracticeA generic standard that may be applied in all fields of electronics where equipment and installations are required to conform to the 482.6 mm (19... Active Standard
1101.11-1998 - Mechanical Rear Plug-in Units Specifications for Microcomputers Using 1101.1 and IEEE 1101.10 Equipment PracticeAdditional dimensions that will ensure mechanical interchangeability of subracks and plug-in units based on IEEE P1101.1 (D1.0, 1997), IEEE Std... Active Standard
1149.1-1990 - Standard Test Access Port and Boundary-Scan ArchitectureIEEE Std. 1149.1-1990, defines circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled... Superseded Standard
1149.1-2001 - Standard Test Access Port and Boundary Scan ArchitectureCircuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards is... Superseded Standard
1149.1-2013 - Test Access Port and Boundary-Scan ArchitectureCircuitry that may be built into an integrated circuit to assist in the test, maintenance and support of assembled printed circuit boards and the... Active Standard
Displaying results 41 - 80 of 296 - all results