Project Icon

Computer Technology Standards

Computer Technology Standards
Status Help
165-1977 - IEEE Standard Definitions of Terms for Analog ComputersThe standard defines analog computing terms from absolute value circuit to zero error reference. Each term is accompanied by a paragraph ... withdrawn Standard
166-1977 - IEEE Standard Definitions of Terms for Hybrid Computer Linkage ComponentsThe standard presents definitions of hybrid computer linkage components terms from analog to digital converters to multiplying DAC. Each ... withdrawn Standard
265-1966 - IEEE Recommended Practices for Burst Measurements in the Frequency DomainThis document is a companion to Technical Committee Report on Recommended Practices for Burst Measurements in the Time Domain, IEEE No. ... active Standard
610-1990 - IEEE Standard Computer Dictionary: A Compilation of IEEE Standard Computer GlossariesIdentifies terms currently in use in the computer field. Standard definitions for those terms are established. Compilation of IEEE Stds ... withdrawn Standard
610.2-1987 - IEEE Standard Glossary of Computer Applications TerminologyTerms currently in use in the computer field are identified, and standard definitions are established for them. Topics covered include a ... withdrawn Standard
610.3-1989 - IEEE Standard Glossary of Modeling and Simulation TerminologyTerms currently in use in the computer field are identified, and standard definitions are established for them. Terms were excluded if t ... withdrawn Standard
610.4-1990 - IEEE Standard Glossary of Image Processing and Pattern Recognition TerminologyThis glossary identifies terms currently in use in the field of image processing and pattern recognition. Standard definitions for those ... withdrawn Standard
610.5-1990 - IEEE Standard Glossary of Data Management TerminologyWithdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Identifies terms in use in the field of data manageme ... withdrawn Standard
610.6-1991 - IEEE Standard Glossary of Computer Graphics TerminologyWithdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Terms in the field of computer graphics are defined. ... withdrawn Standard
610.7-1995 - IEEE Standard Glossary of Computer Networking TerminologyTerms that pertain to data communications and networking, from the following areas, are defined: data transmission, general communicatio ... withdrawn Standard
610.10-1994 - IEEE Standard Glossary of Computer Hardware TerminologyWithdrawn Terms pertaining to computer hardware are defined. Terms falling under the categories of computer architecture, computer stor ... withdrawn Standard
610.13-1993 - IEEE Standard Glossary of Computer LanguagesThis glossary defines terms that pertain to computer languages. It includes types of computer languages, such as page description langua ... withdrawn Standard
641-1987 - IEEE Standard Definitions and Characterization of Metal Nitride Oxide Semiconductor ArraysThis standard has ten sections: an introduction to the MNOS device and memory array; symbols and definitions; references that contain ad ... withdrawn Standard
660-1986 - IEEE Standard for Semiconductor Memory Test Pattern LanguageThe purpose of this standard is to establish a common language for describing functional tests of memory devices. That language definiti ... withdrawn Standard
662-1992 - IEEE Standard Terminology for Semiconductor MemoryGuidelines under which data sheets for new semiconductor memories are to be generated are provided. Adherence to these guidelines is int ... withdrawn Standard
694-1985 - IEEE Standard for Microprocessor Assembly LanguageThis document standardizes existing practice: it specifies a set of instruction mnemonics and descriptions, establishes a standard assem ... withdrawn Standard
695-1990 - IEEE Standard for Microprocessor Universal Format for Object ModulesThe format of linkable, relocatable, and absolute object modules is specified. MUFOM, the Microprocessor Universal Format for Object Mod ... withdrawn Standard
696-1983 - IEEE Standard 696 Interface DevicesThis standard is intended: (1) To define a rational, general-purpose interface system for designers of new computer system components th ... withdrawn Standard
730-2014 - IEEE Standard for Software Quality Assurance ProcessesRequirements for initiating, planning, controlling, and executing the Software Quality Assurance processes of a software development or ... active Standard
730.1-1995 - IEEE Guide for Software Quality Assurance PlanningApproaches to good Software Quality Assurance practices in support of IEEE Std 730-1989, IEEE Standard for Software Quality Assurance Pl ... withdrawn Standard
746-1984 - IEEE Standard for Performance Measurements of A/D and D/A Converters for PCM Television Video CircuitsThis standard describes methods for measuring ther performance of uniformly coded alnalog-to-digital (A/D) coverters and digital-to-anal ... withdrawn Standard
754-2008 - IEEE Standard for Floating-Point ArithmeticThis standard specifies formats and methods for floating-point arithmetic in computer systems: standard and extended functions with sing ... active Standard
755-1985 - IEEE Trial-Use Extending High Level Language Implementations for MicroprocessorsThis standard specifies extensions to high-level languages for microprocessor applications. It covers computer languages for which there ... withdrawn Standard
770X3.97-1983 - IEEE Standard Pascal Computer Programming LanguageWithdrawn Standard. Withdrawn Date: Jun 18, 1992. This standard specifies the semantics and syntax of the computer programming language ... withdrawn Standard
770X3.160-1989 - IEEE/ANSI Standard for the Programming Language Extended PascalThe standard provides an unambiguous and machine-independent definition of the computer programming language Extended Pascal by specifyi ... withdrawn Standard
796-1983 - IEEE Standard Microcomputer System BusA general-purpose microcomputer system bus is defined, and the device-independent electrical and functional interface requirements that ... withdrawn Standard
802.1D-2004 - IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) BridgesIEEE Std 802.1D-2004, IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges. The PDF of this standa ... active Standard
802.1Xbx-2014 - IEEE Standard for Local and metropolitan area networks -- Port-Based Network Access Control Amendment 1: MAC Security Key Agreement Protocol (MKA) ExtensionsMedia Access Control security (MACsec) Key Agreement protocol (MKA) data elements and procedures that provide additional security and ma ... active Standard
802.1k-1993 - Local and Metropolitan Area Networks: Supplement to LAN/MAN Management: Discovery and Dynamic Control of Event Forwarding (Clause 11)Superseded by IEEE Std 802.1b-1995 Services and protocol elements that permit the exchange of management information between stations a ... withdrawn Standard
802.1AE-2006 - IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) SecurityThis standard specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service pro ... active Standard
802.1AEbw-2013 - IEEE Standard for Local and metropolitan area networks—Media Access Control (MAC) Security Amendment 2: Extended Packet NumberingThe optional use of Cipher Suites that make use of a 64-bit (PN) to allow more than 232 MACsec protected frames to be sent with a single ... active Standard
802.10c-1998 - IEEE Standards for Local and Metropolitan Area Networks: Supplement to Standard for Interoperable LAN/MAN Security (SILS)--Key Management (Clause 3)Withdrawn Jan 16, 2004. This IEEE Standards product is part of the 802 family on LAN/MAN. A cryptographic key management model and a key ... withdrawn Standard
802.15.3e-2017 - IEEE Standard for High Data Rate Wireless Multi-Media Networks--Amendment 1: High-Rate Close Proximity Point-to-Point CommunicationsAn alternative physical layer (PHY) and a modified medium access control (MAC) layer is defined in this amendment. Two PHY modes have be ... active Standard
802.16.2-2004 - IEEE Recommended Practice for Local and Metropolitan Area Networks Coexistence of Fixed Broadband Wireless Access SystemsThis recommended practice provides recommendations for the design and coordinated deployment of fixed broadband wireless access systems ... active Standard
802.16/Conformance04-2006 - IEEE Standard for Conformance to IEEE 802.16 - Part 4: Protocol Implementation Conformance Statement (PICS) Proforma for Frequencies below 11 GHzConformance to IEEE Std 802.16-2004 This amendment updates and expands IEEE Std 802.16-2004 to allow for mobile subscriber stations. active Standard
802d-2017 - IEEE Standard for Local and Metropolitan Area Networks:Overview and Architecture Amendment 1: Allocation of Uniform Resource Name (URN) Values in IEEE 802(R) StandardsHow Uniform Resource Name (URN) values are allocated in IEEE 802(R) standards is described in this amendment to IEEE Std 802(R)-2014. (T ... active Standard
823-1989 - IEEE Standard Methodologies for Specifying Voicegrade Channel Transmission Parameters and Evaluating Connection Transmission Performance for Speech TelephonyWithdrawn Standard. Withdrawn Date: Dec 13, 1994. No longer endorsed by the IEEE. This standard provides network planners with the meth ... withdrawn Standard
828-2012 - IEEE Standard for Configuration Management in Systems and Software EngineeringThis standard establishes the minimum requirements for processes for Configuration Management (CM) in systems and software engineering. ... active Standard
855-1990 - IEEE Standard for Microprocessor Operating System Interfaces (MOSI)Withdrawn Standard. Withdrawn Date: Apr 28, 1996. No longer endorsed by the IEEE. Describes the IEEE Std 855-1990, IEEE standard for mi ... withdrawn Standard
896.1-1991 - IEEE Standard for Futurebus+(R) -- Logical Protocol SpecificationIEEE Std 896.1-1991 provides a set of tools with which to implement a Futurebus+architecture with performance and cost scalability over ... withdrawn Standard
896.2-1991 - IEEE Standard Backplane Bus Specification for Multiprocessor Architectures: Futurebus+(R)Futurebus+ standards provide systems developers a set of tools with which high-performance bus-based systems may be developed. This arch ... withdrawn Standard
896.2a-1994 - IEEE Standard for Futurebus+(R) -- Physical Layer and Profile Specification: Errata, Corrections, and ClarificationsThis supplement contains errata, corrections, and clarifications to IEEE Std 896.2a-1991. Futurebus+ standards provide systems developer ... withdrawn Standard
896.3-1993 - IEEE Recommended Practice for Futurebus+(R)The system layer issues associated with bus-based computer systems are described. It is intended to be a tool for Futurebus+ board and s ... withdrawn Standard
896.4-1993 - IEEE Standard for Conformance Test Requirements for Futurebus+(R)A suite of abstract test cases for verifying the conformance of products based on the Futurebus+ family of standards and a means of sele ... withdrawn Standard
896.4a-1995 - IEEE Standard for Conformance Test Requirements for Futurebus+(R) - Errata, Corrections and ClarificationsErrata, corrections, and clarifications to IEEE Std 896.4-1993, as well as a new diskette version of the conformance test suite to repla ... withdrawn Standard
896.5-1993 - IEEE Standard for Futurebus+(R), Profile M (Military)Withdrawn Standard. Withdrawn Date: Jan 10, 2002. No longer endorsed by the IEEE. Futurebus+ standards provide systems developers with ... withdrawn Standard
896.5a-1994 - IEEE Standard for Futurebus+(R), Profile M (Military): Errata, Corrections, and ClarificationsWithdrawn Jan 10, 2002. The supplement contains errata, corrections, and clarifications to IEEE Std 896.5-1993. Futurebus+ standards pr ... withdrawn Standard
896.9-1994 - IEEE Standard for Fault Tolerant Extensions to the Futurebus+(R) ArchitectureThis standard is one in a family of Futurebus+TM standards. The Futurebus+ standards provide a set of tools with which to implement a bu ... withdrawn Standard
896.10-1997 - Standard for Futurebus+(R) Spaceborne Systems - Profile SIn the Futurebus+® series of standards, tools with which high-performance bus-based systems may be developed are provided. This archite ... withdrawn Standard
949-1985 - IEEE Trial-Use Standard for Media-Independent Information TransferThe purpose of this standard is to define a format for the transmission of files and their attributes between computer systems, independ ... withdrawn Standard
959-1988 - IEEE Standard Specifications for an I/O Expansion Bus: SBX BusAn I/O expansion bus for microcomputers that is independent of processor or board type is specified. Each expansion interface supports u ... withdrawn Standard
961-1987 - IEEE Standard for an 8-Bit Microcomputer Bus System: STD BusWithdrawn Standard. Withdrawn Date: Jan 15, 2001. No longer endorsed by the IEEE. An 8-bit microcomputer bus system derived from the in ... withdrawn Standard
982.1-2005 - IEEE Standard Dictionary of Measures of the Software Aspects of DependabilityA Standard Dictionary of Measures of the Software Aspects of Dependability for assessing and predicting the reliability, maintainability ... active Standard
982.2-1988 - IEEE Guide for the Use of IEEE Standard Dictionary of Measures to Produce Reliable SoftwareThis IEEE Standards product is part of the family on Software Engineering. This guide provides the underlying concepts and motivation fo ... withdrawn Standard
983-1986 - IEEE Guide for Software Quality Assurance PlanningThe purpose of this guide is to explain and clarify the contents of each section of a Software Quality Assurance Plan (SQAP) that satisf ... withdrawn Standard
990-1987 - IEEE Recommended Practice for Ada As a Program Design LanguageWithdrawn Standard -- Recommendations reflecting the state of the art and alternate approaches to good practice for establishing charact ... withdrawn Standard
997-1985 - IEEE Standard Serial ASCII Instrumentation Loop (SAIL) Shipboard Data CommunicationDistributed multi-computer master stations and distributed remote terminal units (RTUs) are introduced. Submaster RTUs used in an automa ... withdrawn Standard
1000-1987 - IEEE Standard for an 8-Bit Backplane Interface: STEbusMethods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray ... withdrawn Standard
1002-1987 - IEEE Standard Taxonomy for Software Engineering StandardsThe form and content of a software engineering standards taxonomy is described. Applicability is not restricted by software application ... withdrawn Standard
1003.0-1995 - Guide to the POSIX(R) Open System Environment (OSE)This guide presents an overview of open system concepts and their applications. Information is provided to persons evaluating systems ba ... withdrawn Standard
1003.1-2017 - IEEE Approved Draft Standard for Information Technology - Portable Operating System Interface (POSIX(R))The purpose of this revision is to rollup the two technical corrigenda; IEEE 1003.1-2008™/Cor 1-2013 and IEEE 1003.1-2008™/Cor 2-201 ... active Standard
1003.3-1991 - IEEE Standard for Information Technology--Test Methods for Measuring Conformance to POSIX(R)Withdrawn Standard. Withdrawn Date: Dec 09, 1997. No longer endorsed by the IEEE. This standard defines the general requirements and t ... withdrawn Standard
1003.5-1992 - IEEE Standard for Information Technology--POSIX(R) Ada Language Interfaces--PART 1: Binding for System Application Program Interface (API)This standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the Ada language ... withdrawn Standard
1003.5b-1996 - IEEE Standard for Information Technology--POSIX(R) Ada Language Interfaces--Part 1: Binding for System Application Program Interface (API)--Amendment 1: Realtime ExtensionsThis standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the Ada language ... withdrawn Standard
1003.5c-1998 - IEEE Standard for Information Technology - POSIX Ada Language Interfaces - Part 1: Binding for System Application Program Interface (API)This standard is part of the POSIX ®series of standards or applications and user inter-faces to open systems.It defines the Ada languag ... withdrawn Standard
1003.9-1992 - IEEE Standard for InformationTechnology - POSIX(R) FORTRAN 77 Language Interfaces - Part 1: Binding for System Application Program Interface (API)This standard provides a standardized interface for accessing the system services of ISO/IEC 9945-1:1990 (IEEE Std 1003.1-1990, also kno ... withdrawn Standard
1003.10-1995 - IEEE Standard for Information Technology POSIX(R)-Based Supercomputing Application Environment ProfileThis standard is related to the POSIX¨ series of standards for applications and user interfaces to open systems. It specifies the set ... withdrawn Standard
1003.13-2003 - IEEE Standard for Information Technology - Standardized Application Environment Profile (AEP) - POSIX(R) Realtime and Embedded Application SupportThis standard is part of the POSIX series of standardized profiles for open systems. It defines environment profiles for portable realti ... active Standard
1003.23-1998 - IEEE Guide for Developing User Open System Environment (OSE) ProfilesThis guide presents an overview of User Organization Open System Environment (OSE) Profiles and their application. It is intended to ass ... withdrawn Standard
1003.26-2003 - IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(R)) - Part 26: Device Control Application Program Interface (API) [C Language]This standard is part of the POSIX series of standards. It defines an application program interface for controlling device drivers. Alth ... active Standard
1004-1987 - IEEE Standard Definitions of Planar Transmission LinesWithdrawn Standard. Withdrawn Date: Dec 03, 1992. No longer endorsed by the IEEE. It has been recognized that a standard was needed for ... withdrawn Standard
1005-1998 - IEEE Standard for Definitions, Symbols, and Characterization of Floating Gate Memory ArraysThis standard describes the underlying physics and the operation of floating gate memory arrays, specifically, UV erasable EPROM, byte r ... withdrawn Standard
1012-2016 - IEEE Standard for System, Software, and Hardware Verification and ValidationVerification and validation (V&V) processes are used to determine whether the development products of a given activity conform to the re ... active Standard
1012-2016/Cor 1-2017 - IEEE Draft Standard for System, Software and Hardware Verification and Validation - Corrigendum 1Verification and validation (V&V) processes are used to determine whether the development products of a given activity conform to the re ... active Standard
1014-1987 - IEEE Standard for A Versatile Backplane Bus: VMEbusThis IEEE 1014 standard specifies a high-performance backplane bus for use in microcomputer systems that employ single or multiple micro ... active Standard
1014.1-1994 - IEEE Standard for a Futurebus+(R)/VME64 BridgeWithdrawn Standard. Withdrawn Date: May 01, 2000. The logical protocol layer for bridging between a Futurebus+ system and a VME64 system ... withdrawn Standard
1016-2009 - IEEE Standard for Information Technology--Systems Design--Software Design DescriptionsThis standard describes software designs and establishes the information content and organization of a software design description (SDD) ... active Standard
1016.1-1993 - IEEE Guide to Software Design DescriptionsWithdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. The application of design methods and design document ... withdrawn Standard
1028-2008 - IEEE Standard for Software Reviews and AuditsThis standard provides minimum acceptable requirements for systematic software reviews, where “systematic” includes the following at ... active Standard
1029.1-1998 - IEEE Standard For VHDL Waveform and Vector Exchange (Waves) to Support Design and Test VerificationAdministratively withdrawn in January 2004 - Not available to Resellers (Revision of IEEE Std 1029.1-1991) This standard is a formal n ... withdrawn Standard
1042-1987 - IEEE Guide to Software Configuration ManagementThe application of configuration management (CM) disciplines to the management of software engineering projects is described. For those ... withdrawn Standard
1044-2009 - IEEE Standard Classification for Software AnomaliesThis standard provides a uniform approach to the classification of software anomalies, regardless of when they originate or when they ar ... active Standard
1044.1-1995 - IEEE Guide to Classification for Software AnomaliesAdministratively withdrawn This guide provides supporting information to assist users applying the IEEE Std 1044-1993, IEEE Standard Cl ... withdrawn Standard
1045-1992 - IEEE Standard for Software Productivity MetricsAdminstratively withdrawn.This IEEE Standards product is part of the family on Software Engineering. A consistent way to measure the ele ... withdrawn Standard
1059-1993 - IEEE Guide for Software Verification and Validation PlansGuidance in preparing Software Verification and Validation Plans (SVVPs) that comply with IEEE Std 1012-1986 are provided. IEEE Std 1012 ... withdrawn Standard
1061-1998 - IEEE Standard for a Software Quality Metrics MethodologyThis IEEE Standards product is part of the family on Software Engineering. A methodology for establishing quality requirements and ident ... active Standard
1062-1998 - IEEE Recommended Practice for Software Acquisition, 1998 EditionIEEE Std 1062, 1998 Edition (R2002), Includes IEEE Std 1062-1993 and IEEE Std 1062a-1998. A set of useful quality practices that can be ... active Standard
1062-2015 - IEEE Recommended Practice for Software AcquisitionA set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process is de ... active Standard
1074.1-1995 - IEEE Guide for Developing Software Life Cycle ProcessesWithdrawn Standard. Withdrawn Date: Jan 15, 2001. Selected topics covered in IEEE Std 1074-1995, IEEE Standard for Developing Software ... withdrawn Standard
1076-2008 - IEEE Standard VHDL Language Reference ManualVHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notation intended for use in all phases of the creation of elect ... active Standard
1084-1986 - IEEE Standard Glossary of Mathematics of Computing TerminologyThis dictionary defines terms in the field of Mathematics of Computing. Topics covered include Boolean algebra, number systems, compute ... withdrawn Standard
1096-1988 - IEEE Standard for a Multiplexed High-Performance Bus Structure: VSBWithdrawn Standard. Specifications for the subsystem bus of the IEC 821 BUS, referred to as the VSB, are set forth. VSB is a local subsy ... withdrawn Standard
1101-1987 - IEEE Standard for Mechanical Core Specifications for MicroprocessorsThe standard covers three areas: the basic dimensions of subracks, this range of modular subracks conforming to IEC 297-3-1984, for moun ... withdrawn Standard
1101.1-1998 - IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 ConnectorsThe basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipm ... active Standard
1101.2-1992 - IEEE Standard for Mechanical Core Specifications for Conduction-Cooled EurocardsMechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is ... active Standard
1101.3-1993 - IEEE Mechanical Standard for Conduction-Cooled and Air-Cooled 10 SU ModulesWithdrawn Standard. Withdrawn Date: Jan 15, 2001. No longer endorsed by the IEEE. The mechanical design requirements for conduction-co ... withdrawn Standard
1101.4-1993 - IEEE Standard for Military Module, Format E Form Factor Withdrawn Standard. Withdrawn Date: Jan 15, 2001. No longer endorsed by the IEEE. The mechanical design requirements for a military mo ... withdrawn Standard
1101.7-1995 - IEEE Standard for Space Applications Module, Extended Height Format E Form FactorWithdrawn Standard. Withdrawn Date: Jan 15, 2001. The design requirements for a module designated for use in spacecraft, boosters, and ... withdrawn Standard
1101.10-1996 - IEEE Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE 1101.1-1998 Equipment PracticeA generic standard that may be applied in all fields of electronics where equipment and installations are required to conform to the 482 ... active Standard
1101.11-1998 - IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment PracticeAdditional dimensions that will ensure mechanical interchangeability of subracks and plug-in units based on IEEE P1101.1 (D1.0, 1997), I ... active Standard
1149.1-2013 - IEEE Standard for Test Access Port and Boundary-Scan ArchitectureCircuitry that may be built into an integrated circuit to assist in the test, maintenance and support of assembled printed circuit board ... active Standard
1149.5-1995 - IEEE Standard for Module Test and Maintenance Bus (MTM-Bus) Protocol This Standard specifies a serial, backplane, test and maintenance bus (MTM-Bus) that can be used to integrate modules from different de ... withdrawn Standard
1149.6-2015 - IEEE Standard for Boundary-Scan Testing of Advanced Digital NetworksIEEE Std 1149.1(TM) is augmented by this standard to improve the ability for testing differential and/or ac-coupled interconnections bet ... active Standard
1149.8.1-2012 - IEEE Standard for Boundary-Scan-Based Stimulus of Interconnections to Passive and/or Active ComponentsExtensions to IEEE Std 1149.1(TM) that define the boundary-scan structures and methods required to facilitate boundary-scan-based stimul ... active Standard
1149.10-2017 - IEEE Standard for High-Speed Test Access Port and On-Chip Distribution ArchitectureCircuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boar ... active Standard
1154-1991 - IEEE Standard for Programmed Inquiry, Learning, or Teaching (PILOT)Language and coding standards for the PILOT programming language are described. PILOT (Programmed Inquiry, Learning, Or Teaching) is a l ... withdrawn Standard
1155-1992 - IEEE Standard for VMEbus Extensions for Instrumentation: VXIbusA technically sound modular instrument standard base on IEEE Std 1014-1987, IEEE Standard for a Versatile Backplane Bus: VMEbus, which i ... active Standard
1156.1-1993 - IEEE Standard Microcomputer Environmental Specifications for Computer ModulesFundamental information on minimum environmental withstand conditions is provided. The information is intended to be used in those cases ... active Standard
1156.2-1996 - IEEE Standard for Environmental Specifications for Computer SystemsReaffirmed 2003. This standard is designed for use in conjunction with other documents such as the IEEE 1101 group of standards, the IE ... active Standard
1156.4-1997 - IEEE Standard for Environmental Specifications for Spaceborne Computer ModulesFundamental information on minimum environmental withstand conditions for space electronics is provided. The intent is to achieve unifor ... withdrawn Standard
1175-1991 - IEEE Standard Reference Model for Computing System Tool InterconnectionsWithdrawn Standard. Withdrawn Date: Jan 10, 2002. No longer endorsed by the IEEE. This IEEE Standards product is part of the family on ... withdrawn Standard
1175.1-2002 - IEEE Guide for CASE Tool Interconnections - Classification and DescriptionReaffirmed September 2007. This guide describes the scope of application and interrelationships for the members of the IEEE 1175 family ... active Standard
1175.2-2006 - IEEE Recommended Practice for CASE Tool Interconnection - Characterization of InterconnectionsInterconnections that need to be understood and evaluated when buying, building, testing, or using Computer-Aided Software Engineering ( ... active Standard
1175.3-2004 - IEEE Standard for CASE Tool Interconnections - Reference Model for Specifying Software BehaviorComputer-Aided Software Engineering (CASE) tools are used to describe the behavior of software using a variety of different design notat ... active Standard
1175.4-2008 - IEEE Standard for CASE Tool Interconnections--Reference Model for Specifying System BehaviorThe reference model that provides a common interpretation basis by which tools can express and communicate the observable features of sy ... active Standard
1178-1990 - IEEE Standard for the Scheme Programming LanguageReaffirmed 2008. The form and meaning of programs written in the Scheme programming language, in particular, their syntax, the semantic ... active Standard
1194-1991 - IEEE Standard for Backplane Electrical PerformanceThe proper treatment of the electrical elements of the backplane that provides a physical and electrical connection between different mo ... withdrawn Standard
1194.1-1991 - IEEE Standard for Electrical Characteristics of Backplane Transceiver Logic (BTL) Interface CircuitsThe proper treatment of the electrical elements of the backplane that provides a physical and electrical connection between different mo ... withdrawn Standard
1196-1987 - Standard for a Simple 32-Bit Backplane Bus: NuBusWithdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. A simple, high-performance (37.5 Mbyte/s) backplane b ... withdrawn Standard
1209-1992 - IEEE Recommended Practice for the Evaluation and Selection of CASE ToolsAdminstratively withdrawn 1999. The evaluation and selection of CASE tools supporting software engineering processes, including project ... withdrawn Standard
1212-2001 - IEEE Standard for a Control and Status Registers (CSR) Architecture for Microcomputer BusesAdministratively withdrawn January 2007 A common bus architecture (which includes functional components--modules, nodes,and units--and ... withdrawn Standard
1212.1-1993 - IEEE Standard for Communicating Among Processors and Peripherals Using Shared Memory (Direct Memory Access - DMA)Administratively withdrawn January 2007 Primitive yet high-performance means are defined for passing messages across the bus between t ... withdrawn Standard
1224-1993 - IEEE Standard for Information Technology--Open Systems Interconnection (OSI) Abstract Data Manipulation--Application Program Interfaces (API) [Language Independent]Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. A general-purpose application program interface (API) ... withdrawn Standard
1224.2-1993 - IEEE Standard for Information Technology--Directory Services--Application Programming Interface (API) [Language Independent]Withdrawn Standard. A application program interface (API) to OSI directory services is defined in terms that are independent of any part ... withdrawn Standard
1224/1224.1/1327-1994 - IEEE Standards Interpretations for Std 1224-1993, Std 1327.1-1993, Std 1224.1-1993The Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encounte ... withdrawn Standard
1226.6-1996 - IEEE ABBET(R)- IEEE Guide for the Understanding of the "A Broad-Based Environment for Test (ABBET)(R)" StandardAs a part of the family of IEEE ABBET(R) standards, this guide facilitates an understanding of the relationships of IEEE ABBET(R) 1226-1 ... withdrawn Standard
1228-1994 - IEEE Standard for Software Safety PlansThe minimum acceptable requirements for the content of a software safety plan are established. This standard applies to the software saf ... active Standard
1233-1998 - IEEE Guide for Developing System Requirements SpecificationsReplaced by ISO/IEC/IEEE 29148:2011. Guidance for the development of the set of requirements, System Requirements Specification (SyRS), ... active Standard
1238.1-1994 - IEEE Standard for Information Technology, OSI Application Program Interfaces--File Transfer, Access, and Management [C Language]Withdrawn Standard. Withdrawn Date: Mar 06, 2000. A C language Application Program Interface (API) to the OSI File Transfer, Access, an ... withdrawn Standard
1244.1-2000 - IEEE Standard for Media Management System (MMS) ArchitectureAdministratively withdrawn January 2007 The architecture of a distributed, platform-independent system that manages removable media, i ... withdrawn Standard
1244.2-2000 - IEEE Standard for Media Management System (MMS) Session Security, Authentication, Initialization Protocol (SSAIP)Administratively Withdrawn January 2007 The syntax and semantics of the protocol messages that pass between the MMS clientor MMS modul ... withdrawn Standard
1244.3-2000 - IEEE Standard for Media Management System (MMS) Media Management Protocol (MMP)All relevant behavior and states of the Media Management System (MMS) and the Media Manager (MM) from the time the MMS application succe ... withdrawn Standard
1244.4-2000 - IEEE Standard for Media Management System (MMS) Drive Management Protocol (DMP)Version 1.0 of the Drive Management Protocol (DMP) is specified. withdrawn Standard
1244.5-2000 - IEEE Standard for Media Management System (MMS) Library Management Protocol (LMP)Administratively Withdrawn January 2007 The protocol syntax and semantics of messages that pass between the Library Manager(LM) and th ... withdrawn Standard
1275-1994 - IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and PracticesFirmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary ... withdrawn Standard
1275.1-1994 - IEEE Standard for Boot (Initialization Configuration) Firmware: Instruction Set Architecture (ISA) Supplement for IEEE 1754Firmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary ... withdrawn Standard
1275.2-1994 - IEEE Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 1496 (SBus)Firmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary ... withdrawn Standard
1275.4-1995 - IEEE Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+(R))Withdrawn Standard. Withdrawn Date: Jan 15, 2001. Firmware is the read-only-memory (ROM)-based software that controls a computer betwe ... withdrawn Standard
1278.1-2012 - IEEE Standard for Distributed Interactive Simulation--Application ProtocolsData messages, known as Protocol Data Units (PDUs), that are exchanged on a network among simulation applications are defined. These PDU ... active Standard
1284-2000 - IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal ComputersA signaling method for asynchronous, fully interlocked, bidirectional parallel communi-cations between hosts and printers or other perip ... active Standard
1284.1-1997 - IEEE Standard for Information Technology -Transport Independent Printer/System Interface (TIP/SI)A protocol and methodology for software developers, computer vendors, and printer manufacturers to facilitate the orderly exchange of in ... active Standard
1284.3-2000 - IEEE Standard for Interface and Protocol Extensions to IEEE Std 1284 Compliant Peripherals and Host AdaptersAdministratively Withdrawn February 2006 System extensions consistent with the implementation and functionality of IEEE Std 1284-2000 a ... withdrawn Standard
1284.4-2000 - IEEE Standard for Data Delivery and Logical Channels for IEEE Std 1284 InterfacesAdministratively Withdrawn February 2006 A device to carry on multiple, concurrent exchanges of data and/or control informationwith ano ... withdrawn Standard
1285-2005 - IEEE Standard for Scalable Storage InterfaceThis document specifies a scalable interface between mass-storage devices and controlling hard-ware/software. The interface has been opt ... active Standard
1295-1993 - IEEE Standard for Information Technology--X Window System--Modular Toolkit Environment (MTE)Graphical user interface (GUI) applications and user interfaces to open systems are covered. This standard defines the application inter ... withdrawn Standard
1296-1987 - IEEE Standard for a High-Performance Synchronous 32-Bit Bus: MULTIBUS IIThis standard describes a high-performance backplane bus intended for use in multiple processor systems. The bus incorporates synchronou ... withdrawn Standard
1298-1992 - IEEE Standard Software Quality Management System Part 1: RequirementsRequirements for a software developer's quality management system are established. Each of the elements of a quality management system t ... withdrawn Standard
1301-1991 - IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination DocumentAdministratively withdrawn January 2007 The metric mechanical coordination of microcomputer components, including the cabinet, rack, s ... withdrawn Standard
1301.1-1991 - IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2 mm Connectors1301.1-1991 Metric Equipment Practice for Microcomputers - Convention-Cooled 2 mm Conn (PDF) withdrawn Standard
1301.2-1993 - IEEE Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991)Recommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, ... withdrawn Standard
1301.3-1992 - IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm ConnectorsRecommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, ... active Standard
1301.4-1996 - IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document for Mezzanine CardsThis standard establishes the metric modular order and coordination dimensions for mezzanine cards for use on host modules. active Standard
1320.1-1998 - IEEE Standard for Functional Modeling Language - Syntax and Semantics for IDEF0Reaffirmed 2004. IDEF0 function modeling is designed to represent the decisions, actions, and activities of an existing or prospective o ... active Standard
1320.2-1998 - IEEE Standard for Conceptual Modeling Language - Syntax and Semantics for IDEF1X97 (IDEFobject)IDEF1X97 consists of two conceptual modeling languages. The key-style language supports data/information modeling and is downward compat ... active Standard
1326.1-1993 - IEEE Standard for Information Technology Test Methods for Measuring Conformance to X.400 Based Electronic Messaging Application Program Interfaces (API) [Language Independent]Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. The test methods that may be used to test conformance ... withdrawn Standard
1326.2-1993 - IEEE Standard for Information Technology--Test Methods for Measuring Conformance to Directory Services--Application Program Interface (API) [Language Independent]Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Test methods for IEEE Std 1224.2-1993, language-indep ... withdrawn Standard
1327-1993 - IEEE Standard for Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interfaces (API)A C programming language binding for the general-purpose OSI Abstract Data Manipulation (OM) Application Program Interface (API) in IEEE ... withdrawn Standard
1327.1-1993 - IEEE Standard for Information Technology--X.400 Based Electronic Messaging C Language Interfaces--Binding for Application Program Interfaces (API)A C language binding to IEEE Std 1224.1-1993, IEEE Standard for Information Technology--X.400-Based Electronic Messaging--Application Pr ... withdrawn Standard
1327.2-1993 - IEEE Standard for Information Technology--Directory Services C Language Interfaces--Binding for Application Program Interface (API)A C programming language binding for the Application Program Interface (API) to directory services in IEEE Std 1224.2-1993 is defined. T ... withdrawn Standard
1328.1-1993 - IEEE Standard for Information Technology--Test Methods for Measuring Conformance to X.400 Based Electronic Messaging C Language Interfaces--Binding for Application Program Interfaces (API)Withdrawn Standard. Withdrawn Date: Mar 06, 2000. This standard defines test methods that may be used to test conformance to IEEE Std 1 ... withdrawn Standard
1328.2-1993 - IEEE Standard for Information Technology--Test Methods for Measuring Conformance to Directory Services C Language Interfaces--Binding for Application Program Interface (API)Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Test methods for the C language binding defined in IE ... withdrawn Standard
1348-1995 - IEEE Recommended Practice for the Adoption of Computer-Aided Software Engineering (CASE) ToolsDifficulties that may be encountered, and how they can be avoided, by organizations intending to adopt CASE tools are addressed. An over ... withdrawn Standard
1351-1994 - IEEE Standard for Information Technology--ACSE and Presentation Layer Services--Application Program Interface (API) [C Language Independent] A language-independent Application Program Interface (API) to the ACSE application service element of the OSI application layer and the ... withdrawn Standard
1353-1994 - IEEE Standard for Information Technology--ASCE and Presentation Layer Services--Application Program Interface (API) [C Language Binding]A C language binding to IEEE Std 1351-1994, a language-independent standard defining an Application Program Interface (API) to the ACSE ... withdrawn Standard
1355-1995 - IEEE Standard for Heterogeneous InterConnect (HIC), (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)Enabling the construction of high-performance, scalable, modular, parallel systems with low system integration cost is discussed. Comple ... withdrawn Standard
1363-2000 - IEEE Standard Specifications for Public-Key CryptographyThis standard specifies common public-key cryptographic techniques, including mathematical primitives for secret value (key) derivation, ... active Standard
1363.1-2008 - IEEE Standard Specification for Public Key Cryptographic Techniques Based on Hard Problems over LatticesSpecifications of common public-key cryptographic techniques based on hard problems over lattices supplemental to those considered in IE ... active Standard
1363.2-2008 - IEEE Standard Specification for Password-Based Public-Key Cryptographic TechniquesThis standard covers specifications of public-key cryptographic techniques for password-based authentication and key establishment, supp ... active Standard
1363.3-2013 - IEEE Standard for Identity-Based Cryptographic Techniques using PairingsCommon identity-based public-key cryptographic techniques that use pairings, including mathematical primitives for secret value (key) de ... active Standard
1363a-2004 - IEEE Standard Specifications for Public-Key Cryptography - Amendment 1: Additional TechniquesAmendment to IEEE Std 1363-2000, this standard specifies additional public-key cryptographic techniques beyond those in IEEE Std 1363-20 ... active Standard
1364.1-2002 - (Replaced)IEEE Standard for Verilog Register Transfer Level SynthesisSuperseded by IEC/IEEE 62142-2005. To develop a standard syntax and semantics for Verilog RTL synthesis. This standard shall define the ... withdrawn Standard
1386-2001 - IEEE Standard for a Common Mezzanine Card Family: CMCAdministratively withdrawn January 2007 The mechanics of a common mezzanine card (CMC) family are defined in this standard.Mezzanine c ... withdrawn Standard
1386.1-2001 - IEEE Standard Physical and Environmental Layers for PCI Mezzanine Cards: PMCThis standard, in conjunction with IEEE Std 1386-2001, IEEE Standard for a CommonMezzanine Card (CMC) Family, defines the physical and e ... withdrawn Standard
1387.2-1995 - IEEE Standard for Information Technology- Portable Operating System Interface (POSIX(R)) System Administration - Part 2: Software AdministrationThis standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines a software pack ... withdrawn Standard
1387.3-1996 - (POSIX(R)) System Administration - Part 3: User and Group Account AdministrationSystem Administration Interface/User and Group Administration for Computer Operating System Environments, is part of the POSIX®series o ... withdrawn Standard
1393-1999 - IEEE Standard for Spaceborne Fiber Optic Data BusThe design requirements for a fiber-optic serial interconnect protocol, topology, and me-dia is established. The application target for ... withdrawn Standard
1394-2008 - IEEE Standard for a High-Performance Serial BusThis standard provides specifications for a high-speed serial bus that supports both asynchronous and isochronous communication and inte ... active Standard
1394.1-2004 - IEEE Standard for High Performance Serial Bus BridgesThe model, definition, and behaviors of High Performance Serial Bus bridges, which are devices that can be used to interconnect two sepa ... active Standard
1394.3-2003 - IEEE Standard for a High Performance Serial Bus Peer-to-Peer Data Transport Protocol (PPDT)This standard defines a peer-to-peer data transport (PPDT) protocol between Serial Bus devices that implement Serial Bus Protocol 2 (SBP ... active Standard
1420.1-1995 - IEEE Standard for Information Technology - Software Reuse - Data Model for Reuse Library Interoperability: Basic Interoperability Data Model (BIDM)The minimal set of information about assets that reuse libraries should be able to exchange to support interoperability is provided. withdrawn Standard
1420.1a-1996 - Supplement to IEEE Standard for Information Technology-Software Reuse-Data Model for Reuse Library Interoperability: Asset Certification FrameworkA consistent structure for describing a reuse library's asset certification policy in terms of an Asset Certification Framework is defin ... withdrawn Standard
1420.1b-1999 - IEEE Standard for Information Technology - Software Reuse - Data model for Reuse Library Interoperability: Intellectual Property Rights FrameworkThis extension to the Basic Interoperability Data Model (IEEE Std 1420.1-1995)incorporates intellectual property rights issues into soft ... withdrawn Standard
1430-1996 - IEEE Guide for Information Technology Software Reuse-Concept of Operations for Interoperating Reuse Libraries [Developed in cooperation with the Reuse Library Interoperability Group (RIG)]This document describes the concepts necessary and appropriate for Networks of Interoperating Reuse Libraries (NIRLs). The purpose is to ... withdrawn Standard
1450-1999 - IEEE Standard Test Interface Language (STIL) for Digital Test Vector DataStandard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. A test descripti ... active Standard
1450.2-2002 - IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC Level SpecificationDefine structures in STIL for specifying the DC conditions for a device under test. Examples of the DC conditions for device power suppl ... active Standard
1450.4-2017 - IEEE Approved Draft Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Test Flow SpecificationThis standard extends IEEE Std 1450-1999 (STIL) to 39 provide an interface between test generation tools and test equipment with regard ... active Standard
1450.6.1-2009 - IEEE Standard for Describing On-Chip Scan CompressionThis standard defines how the necessary information is passed from scan insertion to pattern generation and from pattern generation to d ... active Standard
1450.6.2-2014 - IEEE Standard for Memory Modeling in Core Test LanguageReuse of test data and test structures developed for individual cores (designs) when integrated into larger integrated circuits is requi ... active Standard
1465-1998 - IEEE Standard - Adoption of International Standard ISO/IEC 12119:1994(E) - Information Technology - Software Packages - Quality Requirements and TestingQuality requirements for software packages and instructions on how to test a softwarepackage against these requirements are established. ... withdrawn Standard
1484.1-2003 - IEEE Standard for Learning Technology - Learning Technology Systems Architecture (LTSA)High-level architecture for information technology-supported learning, education, and training systems that describes the high-level sys ... withdrawn Standard
1484.4-2007 - IEEE Recommended Practice for Digital Rights Expression Languages (DRELs) Suitable for eLearning TechnologiesThis recommended practice facilitates the creation, management and delivery of digital content for eLearning by technology that implemen ... active Standard
1484.11.1-2004 - IEEE Standard for Learning Technology--Data Model for Content Object CommunicationThis Standard describes a data model to support the interchange of data elements and their values between a content object and a runtime ... active Standard
1484.11.2-2003 - IEEE Standard for Learning Technology - ECMAScript Application Programming Interface for Content to Runtime Services CommunicationAn ECMAScript application programming interface (API) for content-to-runtime-services communication is described in this standard. It i ... active Standard
1484.11.3-2005 - IEEE Standard for Learning Technology Extensible Markup Language (XML) Schema Binding for Data Model for Content Object CommunicationThis Standard specifies a World Wide Web Consortium (W3C) Extensible Markup Language (XML) binding of the data model defined in IEEE Std ... active Standard
1484.12.1-2002 - IEEE Standard for Learning Object MetadataA conceptual data schema that defines the structure of a metadata instance for a learning object is specified in this standard. active Standard
1484.12.1-2002/Cor 1-2011 - IEEE Standard for Learning Object Metadata - Corrigendum 1: Corrigenda for 1484.12.1 LOM (Learning Object Metadata)This corrigendum clarifies and corrects technical errors, editorial errors, and omissions in IEEE Std 1484.12.1-2002. active Standard
1484.12.3-2005 - IEEE Standard for Extensible Markup Language (XML) Schema Definition Language Binding for Learning Object MetadataThis Standard defines a World Wide Web Consortium (W3C) Extensible Markup Language (XML) Schema definition language binding of the learn ... active Standard
1484.13.1-2012 - IEEE Standard for Learning Technology -- Conceptual Model for Resource Aggregation for Learning, Education, and TrainingA conceptual model for interpreting externalized representations of digital aggregations of resources for learning, education, and train ... active Standard
1484.13.2-2013 - IEEE Recommended Practice for Learning Technology -- Metadata Encoding and Transmission Standard (METS) Mapping to the Conceptual Model for Resource AggregationThis recommended practice specifies how the elements and attributes defined in the Metadata Encoding and Transmission Standard (METS) re ... active Standard
1484.13.4-2016 - IEEE Recommended Practice for Learning Technology—IMS Content Packaging Information Model (CP) Version 1.2—Mapping to the Conceptual Model for Resource AggregationSpecified in this recommended practice is how the elements and attributes defined in the IMS Content Packaging Information Model (CP) Ve ... active Standard
1484.13.5-2013 - IEEE Recommended Practice for Learning Technology — IETF RFC 4287 — Atom Syndication Format— Mapping to the Conceptual Model for Resource AggregationThis recommended practice specifies how the elements and attributes defined in the Atom Syndication Format (Atom) relate to the componen ... active Standard
1484.13.6-2015 - IEEE Recommended Practice for Learning Technology - Open Archives Initiative Object Reuse and Exchange Abstract Model (OAI-ORE) - Mapping to the Conceptual Model for Resource AggregationSpecified in this recommended practice are how the elements and attributes defined in the Open Archives Initiative Object Reuse and Exch ... active Standard
1484.20.1-2007 - IEEE Standard for Learning Technology-Data Model for Reusable Competency DefinitionsThis Standard defines a data model for describing, referencing, and sharing competency definitions, primarily in the context of online a ... active Standard
1490-2003 - IEEE Guide Adoption of PMI Standard - A Guide to the Project Management Body of KnowledgeSupersedes IEEE Std 1490-1998 SUMMARY: IEEE Std 1490-2003 is an adoption, in its entirety, of A Guide to Project Management Body of Know ... withdrawn Standard
1490-2011 - IEEE Guide--Adoption of the Project Management Institute (PMI(R)) Standard A Guide to the Project Management Body of Knowledge (PMBOK(R) Guide)--Fourth EditionThe PMI standard, A Guide to the Project Management Body of Knowledge (PMBOK(R) Guide)--Fourth Edition, is adopted in this standard. (NO ... withdrawn Standard
1493-2006 - IEEE Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and AccessoriesThis guide provides test procedures for evaluating the physical characteristics of cable cleaning solvents and their compatibility with ... active Standard
1496-1993 - IEEE Standard for a Chip and Module Interconnect Bus: SBusAn input/output expansion bus with a 32- or 64-bit width is described in this standard. The SBus is designed for systems requiring a sma ... withdrawn Standard
1500-2005 - IEEE Standard Testability Method for Embedded Core-based Integrated CircuitsThis standard defines a mechanism for the test of core designs within a system on chip (SoC). This mechanism constitutes a hardware arch ... active Standard
1505.3-2015 - IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505™ Receiver Fixture Interface StandardPortable/benchtop test equipment applications are supported in this document by defining a mass interconnection scheme and pin configura ... active Standard
1516-2010 - IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA)-- Framework and RulesThis standard, describing the framework and rules of the High Level Architecture (HLA), is the capstone document for a family of related ... active Standard
1516.1-2010 - IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA)-- Federate Interface SpecificationThe High Level Architecture (HLA) has been developed to provide a common architecture for distributed modeling and simulation. The HLA d ... active Standard
1516.2-2010 - IEEE Standard for Modeling and Simulation (M&S) High Level Architecture (HLA)-- Object Model Template (OMT) SpecificationThe High Level Architecture (HLA)—Object Model Template (OMT) specification defines the format and syntax (but not content) of HLA obj ... active Standard
1516.4-2007 - IEEE Recommended Practice for Verification, Validation, and Accreditation of a Federation - an Overlay to the High Level Architecture Federation Development and Execution ProcessThis recommended practice defines the processes and procedures that should be followed to implement Verification, Validation, and Accred ... active Standard
1517-2010 - IEEE Standard for Information Technology--System and Software Life Cycle Processes--Reuse ProcessesA common framework for extending the system and software life cycle processes of IEEE Std 12207(TM)-2008 to include the systematic pract ... active Standard
1532-2002 - IEEE Standard for In-System Configuration of Programmable DevicesThe communication protocol described by IEEE Std 1149.1 TM -2001 (Standard Test Access Port and Boundary-Scan Architecture) has been ado ... withdrawn Standard
1546-2000 - IEEE Guide for Digital Test Interchange Format (DTIF) ApplicationAn aid in the understanding and use of digital test interchange format (DTIF) files isprovided in this guide. This information will be a ... active Standard
1596-1992 - IEEE Standard for Scalable Coherent Interface (SCI)The scalable coherent interface (SCI) provides computer-bus-like services but, instead of a bus, uses a collection of fast point-to-poin ... active Standard
1596.3-1996 - IEEE Standard for Low-Voltage Differential Signals (LVDS) for Scalable Coherent Interface (SCI)Scalable Coherent Interface (SCI), specified in IEEE Std 1596-1992, provides computer-bus-like services but uses a collection of fast po ... withdrawn Standard
1596.4-1996 - IEEE Standard for High-Bandwidth Memory Interface Based on Scalable Coherent Interface (SCI) Signaling Technology (RamLink)A high-bandwidth interface optimized for interchanging data between a memory controller and one or more dynamic RAMs is specified. RamL ... withdrawn Standard
1596.5-1993 - IEEE Standard for Shared-Data Formats Optimized for Scalable Coherent Interface (SCI) ProcessorsWithdrawn Standard. Withdrawn Date: Jan 25, 2005. No longer endorsed by the IEEE. Formats for interchanging integer, bit-field, and flo ... withdrawn Standard
1599-2008 - IEEE Recommended Practice for Defining a Commonly Acceptable Musical Application Using XMLThis project will develop an XML application defining a standard language for symbolic music representation. The language will be a meta ... active Standard
1603-2003 - IEEE Standard for an Advanced Library Format (ALF) Describing Integrated Circuit (IC) Technology, Cells, and BlocksSuperseded by IEC/IEEE 62265-2005 (SH/SS95361) ALF shall serve as the data specification language of library elements for design applic ... withdrawn Standard
1619-2007 - IEEE Standard for Cryptographic Protection of Data on Block-Oriented Storage DevicesThis standard specifies cryptographic transform and key archival methods for protection of data in sector-level storage devices. active Standard
1619.1-2007 - IEEE Standard for Authenticated Encryption with Length Expansion for Storage DevicesThis standard specifies cryptographic and data authentication procedures for storage devices that support length-expansion, such as tape ... active Standard
1619.2-2010 - IEEE Standard for Wide-Block Encryption for Shared Storage MediaEME2-AES and XCB-AES wide-block encryption with associated data (EAD) modes of the NIST AES block cipher, providing usage guidelines and ... active Standard
1620-2008 - IEEE Standard for Test Methods for the Characterization of Organic Transistors and MaterialsThis standard describes a method for characterizing organic electronic devices, including measurement techniques, methods of reporting d ... active Standard
1620.1-2006 - IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring OscillatorsRecommended methods and standardized reporting practices for electrical characterization of printed and organic ring oscillators are cov ... active Standard
1633-2016 - IEEE Recommended Practice on Software ReliabilityThe methods for assessing and predicting the reliability of software, based on a life-cycle approach to software reliability engineering ... active Standard
1636-2009 - IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)This document provides an implementation-independent specification for a software interface to information systems containing data perti ... active Standard
1636.1-2013 - IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)This standard is intended to promote and facilitate interoperability between components of automatic test systems where test results nee ... active Standard
1636.99-2013 - IEEE Std 1636.99-2013, IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements.This standard is intended to promote and facilitate interoperability between components of SIMICA. The standard defines EXPRESS informat ... active Standard
1667-2015 - IEEE Standard for Discovery, Authentication, and Authorization in Host Attachments of Storage DevicesDiscovery, authentication, and authorization protocols between hosts and storage devices over multiple transports are defined in this st ... active Standard
1671.6-2015 - IEEE Standard for Automatic Test Markup Language (ATML) Test Station DescriptionAn exchange format, using extensible markup language (XML), for identifying all of the hardware, software, and documentation associated ... active Standard
1680-2006 - IEEE Standard for Environmental Assessment of Personal Computer Products, including Laptop Personal Computers, Desktop Personal Computers, and Personal Computer MonitorsIEEE Std 1680-2006 provides a set of environmental performance criteria for notebook computers, desktop computers, and computer monitors ... active Standard
1680-2009 - IEEE Standard for Environmental Assessment of Electronic ProductsGuidance and implementation procedures for the IEEE 1680 family of standards is provided, and the methods by which manufacturers may dec ... active Standard
1680.1-2009 - IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer DisplaysGuidance and implementation procedures for this and other standards in the IEEE 1680(TM) family of standards are provided. A clear and c ... active Standard
1687-2014 - IEEE Standard for Access and Control of Instrumentation Embedded within a Semiconductor DeviceA methodology for accessing instrumentation embedded within a semiconductor device, without defining the instruments or their features t ... active Standard
1711-2010 - IEEE Trial-Use Standard for a Cryptographic Protocol for Cyber Security of Substation Serial LinksA cryptographic protocol to provide integrity, and optional confidentiality, for cyber security of serial links is defined in this trial ... withdrawn Standard
1722-2016/Cor 1-2016 - IEEE Standard for a Transport Protocol for Time Sensitive Applications in a Bridged Local Area Network- Corrigendum 1Correct additional fields text in AES3 Stream Format section of Annex I. (NOTE: This corrigendum was not published as a separate documen ... active Standard
1722.1-2013 - IEEE Standard for Device Discovery, Connection Management, and Control Protocol for IEEE 1722™ Based DevicesThis standard specifies the protocol, device discovery, connection management and device control procedures used to facilitate interoper ... active Standard
1730-2010 - IEEE Recommended Practice for Distributed Simulation Engineering and Execution Process (DSEEP)Recommended practice for Distributed Simulation Engineering and Execution Process (DSEEP) is described. The DSEEP is intended as a high- ... active Standard
1730.1-2013 - IEEE Recommended Practice for Distributed Simulation Engineering and Execution Process Multi-Architecture Overlay (DMAO)A recommended practice for applying the Distributed Simulation Engineering and Execution Process (DSEEP) to the development and executio ... active Standard
1733-2011 - IEEE Standard for Layer 3 Transport Protocol for Time-Sensitive Applications in Local Area NetworksProtocol, data encapsulations, connection management, and presentation time procedures used to ensure interoperability between audio and ... active Standard
1754-1994 - IEEE Standard for a 32-bit Microprocessor ArchitectureA 32-bit microprocessor architecture, available to a wide variety of manufacturers and users, is defined. The standard includes the defi ... withdrawn Standard
1788-2015 - IEEE Standard for Interval ArithmeticThis standard specifies basic interval arithmetic (IA) operations selecting and following one of the commonly used mathematical interval ... active Standard
1788.1-2017 - IEEE Approved Draft Standard for Interval Arithmetic (Simplified)This standard is a simplifed version and a subset of the IEEE Std 1788TM-2015TM for Interval Arithmetic and includes those operations an ... active Standard
1804-2017 - IEEE Approved Draft Standard for Fault Accounting and Coverage Reporting to Digital Modules (FACR)The standard formalizes aspects of fault models as they are relevant to the generation of test patterns for digital circuits. Its scope ... active Standard
1815.1-2015 - IEEE Standard for Exchanging Information Between Networks Implementing IEC 61850 and IEEE Std 1815™ [Distributed Network Protocol (DNP3)]This document specifies the standard approach for mapping between IEEE Std 1815™ [Distributed Network Protocol (DNP3)] and IEC 61850 ( ... active Standard
1823-2015 - IEEE Standard for Universal Power Adapter for Mobile DevicesA power delivery connection between a power adapter and a power using device greater than 10 W and up to, but less than 240 W, is define ... active Standard
1849-2016 - IEEE Standard for eXtensible Event Stream (XES) for Achieving Interoperability in Event Logs and Event StreamsA grammar for a tag-based language whose aim is to provide designers of information systems with a unified and extensible methodology fo ... active Standard
1851-2012 - IEEE Standard for Design Criteria of Integrated Sensor-Based Test Applications for Household AppliancesAn integrated framework of the test software for household appliances is defined. This standard specifies the test environment and the t ... active Standard
1855-2016 - IEEE Standard for Fuzzy Markup LanguageA new specification language, named Fuzzy Markup Language (FML), is presented in this standard, exploiting the benefits offered by eXten ... active Standard
1857.3-2013 - IEEE Standard for System of Advanced Audio and Video CodingStorage file formats and real-time transport protocol (RTP) payload formats for IEEE 1857(tm) video and IEEE 1857.2(tm) audio are define ... active Standard
1858-2016 - IEEE Standard for Camera Phone Image QualityQuantifying the performance of camera-equipped mobile devices is covered in this standard, with an emphasis on metrics and procedures ap ... active Standard
1874-2013 - IEEE Standard for Documentation Schema for Repair and Assembly of Electronic DevicesoManual is a standard for storing and transmitting procedural manuals. oManual’s common data format can be used as an offline file pac ... active Standard
1888.3-2013 - IEEE Standard for Ubiquitous Green Community Control Network: SecurityThe enhanced security management function for the protocol defined in IEEE 1888(TM), “Ubiquitous Green Community Control Network Proto ... active Standard
1902.1-2009 - IEEE Standard for Long Wavelength Wireless Network ProtocolThis standard defines the air interface for radiating transceiver radio tags using long wavelength signals (kilometric and hectometric f ... active Standard
1904.1-Conformance01-2014 - IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1™ Package AThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, ... active Standard
1904.1-Conformance02-2014 - IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1™ Package BThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, ... active Standard
1904.1-Conformance03-2014 - IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1™ Package CThis standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, ... active Standard
1905.1-2013 - IEEE Standard for a Convergent Digital Home Network for Heterogeneous TechnologiesAn abstraction layer for multiple home networking technologies that provides a common interface to widely deployed home networking techn ... active Standard
1905.1a-2014 - IEEE Standard for a Convergent Digital Home Network for Heterogeneous Technologies Amendment 1: Support of New MAC/PHYs and EnhancementsAn abstraction layer for multiple home networking technologies that provides a common interface to widely deployed home networking techn ... active Standard
2000.1-1999 - IEEE Standard for Information Technology: Standard for Year 2000 TerminologyThis standard revises IEEE Std 2000.1-1998. It provides a detailed set of definitions. Inaddition, it addresses calendar information tha ... withdrawn Standard
2000.2-1999 - IEEE Recommended Practice for Information Technology - Year 2000 Test MethodsThis document provides users of computer hardware, firmware, software, or data systems withrecommended practices for assessing and demon ... withdrawn Standard
2003-1997 - IEEE Standard for Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX StandardsThis standard defines the requirements and guidelines for test method specifications and test method implementations for measuring confo ... withdrawn Standard
2003.1-1992 - IEEE Standard for Information Technology--Test Methods for Measuring Conformance to POSIX(R)--Part1: System InterfacesIEEE Std 2003.1-1992 provides a definition of the requirements placed upon providers of POSIX test methods for POSIX.1 (IEEE Std 10031-1 ... withdrawn Standard
2003.2-1996 - IEEE Standard for Information Technology -Test Methods for Measuring Conformance to POSIX(R) - Part II: Shell and UtilitiesA definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC9945-2:1993,IE ... withdrawn Standard
2200-2012 - IEEE Standard Protocol for Stream Management in Media Client DevicesInterfaces for intelligently distributing and replicating content over heterogeneous networks to portable and intermediate devices with ... active Standard
2410-2017 - IEEE Standard for Biometric Open ProtocolIdentity assertion, role gathering, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Stand ... active Standard
2600-2008 - IEEE Standard for Information Technology: Hardcopy Device and System SecurityThis standard defines security requirements (all aspects of security including but not limited to authentication, authorization, privacy ... active Standard
2600.1-2009 - IEEE Standard for a Protection Profile in Operational Environment AStandard for a Protection Profile for Hardcopy Devices in a restrictive commercial information processing environment in which a relativ ... active Standard
2600.2-2009 - IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment BStandard for a Protection Profile for Hardcopy Devices in a commercial information processing environment in which a moderate level of ... active Standard
2600.3-2009 - IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment CStandard for a Protection Profile for Hardcopy Devices in a public-facing environment in which document security is not guaranteed, but ... active Standard
2600.4-2010 - IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600™-2008 Operational Environment DStandard for a Protection Profile for Hardcopy Devices in a small, private information processing environment in which most elements of ... active Standard
2755-2017 - IEEE Guide for Terms and Concepts in Intelligent Process AutomationAn all-new family of software-based intelligent process automation technologies has emerged recently. Because of the newness of this kin ... active Standard
3333.1.1-2015 - IEEE Standard for Quality of Experience (QoE) and Visual-Comfort Assessments of Three-Dimensional (3D) Contents Based on Psychophysical StudiesAs the demand and supply for 3D technologies grows, the development of accurate quality-assessment techniques shall be used to develop t ... active Standard
3333.2.1-2015 - IEEE Recommended Practice for Three-Dimensional (3D) Medical ModelingThe generation and practical use of medical three-dimensional (3D) modeling for diagnostics and therapeutic applications is described in ... active Standard
9945-2009 - International Standard - Information technology Portable Operating System Interface (POSIX®) Base Specifications, Issue 7Revision and Adoption of IEEE Std 1003.1-2008, this standard defines a standard operating system interface and environment, including a ... active Standard
10857-1994 - ISO/IEC/IEEE International Standard - Information Technology -- Microprocessor Systems -- Futurebus+(R) - Logical Protocol specificationThis International Standard provides a set of tools with which to implement a Futurebus+ architecture with performance and cost scalabil ... active Standard
10861-1994 - ISO/IEC Standard for Information Technology- Microprocessor Systems- High-Performance Synchronous 32-Bit Bus: Multibus IIThe operation, functions, and attributes of a parallel system bus (PSB), called MULTIBUS II, are defined. A high-performance backplane b ... withdrawn Standard
12207-2017 - ISO/IEC/IEEE International Standard - Systems and software engineering -- Software life cycle processesThe purpose of this International Standard is to provide a defined set of processes to facilitate communication among acquirers, supplie ... active Standard
13213-1994 - ISO/IEC/IEEE International Standard for Information technology--Microprocessor systems--Control and Status Registers (CSR) Architecture for microcomputer busesThe document structure and notation are described, and the objectives and scope of the CSR Architecture are outlined. Transition set req ... active Standard
14102-2010 - IEEE Standard for Adoption of ISO/IEC 14102:2008 Information Technology--Guideline for the Evaluation and Selection of CASE ToolsThis standard adopts ISO/IEC 14102:2008 and defines both a set of processes and a structured set of computer-aided software engineering ... active Standard
14252-1996 - ISO/IEC 14252: [IEEE Std 1003.0-1995] Guide to the POSIX(R) Open Systems EnvironmentThis guide presents an overview of open system concepts and their applications. Information is provided to persons evaluating systems ba ... withdrawn Standard
14471-2010 - IEEE Guide for Adoption of ISO/IEC TR 14471:2007 Information Technology -- Software Engineering -- Guidelines for the Adoption of CASE ToolsThis guide adopts ISO/IEC TR 14471:2007. Since computer-aided software engineering (CASE) adoption is a subject of the broader technolog ... active Standard
14515-1-2000 - ISO/IEC/IEEE International Standard for Information Technology -- Portable Operating System Interface (POSIX(R)) -- Test methods for measuring conformance to POSIX -- Part 1: System interfacesISO/IEC 14515-1:2000(E) (IEEE Std 2003.1-1992) provides a definition of the requirements placed upon providers of POSIX test methods for ... active Standard
14515-2-2003 - ISO/IEC International Standard for Information technology--Portable Operating System Interface (POSIX)--Test methods for measuring conformance to POSIX--Part 2:Shell and utilitiesA definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, ... active Standard
14519-1999 - ISO/IEC 14519 : 1999 (IEEE Std 1003.5b), Information technology--POSIX(R) Ada Language Interfaces--Binding for System Application Program Interface (API)--Realtime ExtensionsThis standard is part of the POSIX series of standards for applications and userinterfaces to open systems. It defines the Ada language ... withdrawn Standard
14536-1995 - ISO/IEC 14536:1995 [ANSI/IEEE Std 896.5-1995] Information technology - Microprocessor systems - Futurebus+(R), Profile M (Military)This International Standard provides a set of tools with which to implement a Futurebus+¨ architecture. This high-performance bus-bas ... withdrawn Standard
14764-2006 - ISO/IEC/IEEE International Standard for Software Engineering - Software Life Cycle Processes - MaintenanceThis International Standard describes in greater detail management of the Maintenance Process described in ISO/IEC 12207, including Amen ... active Standard
15026-1-2011 - IEEE Trial-Use Standard--Adoption of ISO/IEC TR 15026-1:2010 Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and VocabularyThis trial-use standard adopts ISO/IEC TR 15026-1:2010, which defines terms and establishes an extensive and organized set of concepts a ... withdrawn Standard
15026-1-2014 - IEEE Standard Adoption of ISO/IEC 15026-1--Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and VocabularyAssurance-related terms are defined and an organized set of concepts and relationships to establish a basis for shared understanding acr ... active Standard
15026-2-2011 - IEEE Standard--Adoption of ISO/IEC 15026-2:2011 Systems and Software Engineering--Systems and Software Assurance--Part 2: Assurance CaseISO/IEC 15026-2:2011 is adopted by this standard. ISO/IEC 15026-2:2011 specifies minimum requirements for the structure and contents of ... active Standard
15026-3-2013 - IEEE Standard Adoption of ISO/IEC 15026-3 -- Systems and Software Engineering -- Systems and Software Assurance -- Part 3: System Integrity LevelsThe concept of integrity levels with corresponding integrity level requirements that are required to be met in order to show the achieve ... active Standard
15026-4-2013 - IEEE Standard Adoption of ISO/IEC 15026-4--Systems and Software Engineering--Systems and Software Assurance--Part 4: Assurance in the Life CycleGuidance and recommendations for conducting selected processes, activities, and tasks for systems and software products requiring assura ... active Standard
15068-2-1999 - ISO/IEC 15068-2 : 1999 (IEEE 1387.2-1995), International Standard Information technology - Portable Operating System Interface (POSIX®) system administration - Part 2: Software administrationThis standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines a software packa ... withdrawn Standard
15205-2000 - ISO/IEC 15205:2000 (IEEE Std 1496-1993) SBus -- Chip and Module Interconnect BusAn input/output expansion bus with a 32-or 64-bit width is described in this standard.The SBus is designed for systems requiring a small ... withdrawn Standard
15288-2015 - ISO/IEC/IEEE International Standard - Systems and software engineering -- System life cycle processesThis International Standard establishes a common process framework for describing the life cycle of man-made systems. It defines a set o ... active Standard
15288.1-2014 - IEEE Standard for Application of Systems Engineering on Defense ProgramsThe requirements for the application of ISO/IEC/IEEE 15288, System Life Cycle Processes for defense systems engineering needs are provid ... active Standard
15288.2-2014 - IEEE Standard for Technical Reviews and Audits on Defense ProgramsThe requirements for technical reviews and audits to be performed throughout the acquisition life cycle for the US Department of Defense ... active Standard
15289-2017 - ISO/IEC/IEEE International Standard - Systems and software engineering -- Content of life-cycle information items (documentation)The purpose and content of all identified systems and software life cycle and service management information items (documentation) are s ... active Standard
15939-2017 - ISO/IEC/IEEE International Standard - Systems and software engineering--Measurement processThis document provides an elaboration of the measurement process from ISO/IEC 15288 and ISO/IEC 12207. The measurement process is applic ... active Standard
16085-2006 - ISO/IEC 16085:2006, Standard for Software Engineering - Software Life Cycle Processes - Risk ManagementA process for the management of risk in the life cycle is defined. It can be added to the existing set of software life cycle processes ... active Standard
16326-2009 - ISO/IEC/IEEE International Standard - Systems and Software Engineering--Life Cycle Processes--Project ManagementISO/IEC/IEEE 16326:2009 provides normative content specifications for project management plans covering software projects, and software- ... active Standard
16509-1999 - ISO/IEC 16509: 1999 (IEEE Std 2000.1-1998) Year 2000 TerminologyThis standard provides concepts, definitions, remediation techniques, and other support- ing terms fundamental to a lexicon for Year 200 ... withdrawn Standard
20000-1-2013 - IEEE Standard - Adoption of ISO/IEC 20000-1:2011, Information technology -- Service management -- Part 1: Service management system requirementsISO/IEC 20000-1:2011, a service management system (SMS) standard, is adopted by the IEEE in this standard. It specifies requirements for ... active Standard
20000-2-2013 - IEEE Standard -- Adoption of ISO/IEC 20000-2:2012, Information technology -- Service management -- Part 2: Guidance on the application of service management systemsGuidance on the application of service management systems (SMS) based on the requirements in IEEE Std 20000-2-2013 (ISO/IEC 20000-1) is ... active Standard
23026-2015 - ISO/IEC/IEEE International Standard - Systems and software engineering - Engineering and management of websites for systems, software, and services informationThis standard defines system engineering and management requirements for the life cycle of websites, including strategy, design, enginee ... active Standard
24748-1-2011 - IEEE Guide--Adoption of ISO/IEC TR 24748-1:2010 Systems and Software Engineering--Life Cycle Management--Part 1: Guide for Life Cycle ManagementThis guide adopts ISO/IEC TR 24748-1:2010, which provides information on life cycle concepts and descriptions of the purposes and outcom ... active Standard
24748-2-2012 - IEEE Guide--Adoption of ISO/IEC TR 24748-2:2011 Systems and Software Engineering-- Life Cycle Management-- Part 2: Guide to the Application of ISO/IEC 15288 (System Life Cycle Processes)ISO/IEC TR 24748-2:2011 is adopted by this standard. ISO/IEC TR 24748-2:2011 is a guide for the application of ISO/IEC 15288:2008. It ad ... active Standard
24748-3-2012 - IEEE Guide:--Adoption of ISO/IEC TR 24748-3:2011, Systems and software engineering-Life cycle management-Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)Adoption of ISO/IEC TR 24748-3:2011. ISO/IEC TR 24748-3:2011 is a guide for the application of ISO/IEC 12207:2008. It addresses system, ... active Standard
24748-4-2016 - ISO/IEC/IEEE International Standard for Systems and Software Engineering -- Life Cycle Management -- Part 4: Systems Engineering PlanningThe evolution of the harmonized set of ISO/IEC/IEEE 15288-12207 related standards and technical reports that are discussed in this Inter ... active Standard
24748-5-2017 - ISO/IEC/IEEE International Standard - Systems and Software Engineering--Life Cycle Management--Part 5: Software Development PlanningISO/IEC/IEEE 24748 provides unified and consolidated guidance on the life cycle management of systems and software. This document focuse ... active Standard
24765-2017 - ISO/IEC/IEEE International Standard - Systems and software engineering--VocabularyThis document provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and stand ... active Standard
24774-2012 - IEEE Guide--Adoption of ISO/IEC TR 24474:2010 Systems and Software Engineering-- Life Cycle Management--Guidelines for Process DescriptionISO/IEC TR 24774:2010 is adopted by this standard. An increasing number of international, national and industry standards describe proce ... active Standard
26511-2012 - Systems and software engineering -- Requirements for managers of user documentationISO/IEC/IEEE 26511:2012 specifies procedures for managing user documentation throughout the software life cycle. It applies to people or ... active Standard
26512-2017 - ISO/IEC/IEEE Draft International Standard - Systems and Software Engineering -- Requirements for Acquirers and Suppliers of Information for UsersThis document provides an overview of the information management processes which may require acquisition and supply of user documentatio ... active Standard
26513-2017 - ISO/IEC/IEEE International Standard - Systems and software engineering -- Requirements for testers and reviewers of information for usersThis document supports the need for software users to receive consistent, complete, accurate, and usable documentation. This document wa ... active Standard
26514-2010 - IEEE Standard for Adoption of ISO/IEC 26514:2008 Systems and Software Engineering--Requirements for Designers and Developers of User DocumentationThis standard provides requirements for the design and development of software user documentation as part of the life cycle processes. I ... active Standard
26515-2012 - Systems and software engineering -- Developing user documentation in an agile environmentISO/IEC/IEEE 26515:2012 specifies the way in which user documentation can be developed in agile development projects. It is intended for ... active Standard
26531-2015 - ISO/IEC/IEEE International Standard for Systems and software engineering -- Content management for product life-cycle, user, and service management documentationThis International Standard provides requirements for the management of the content used in product life cycle, software, and service ma ... active Standard
29119-1-2013 - ISO/IEC/IEEE International Standard - Software and systems engineering —Software testing —Part 1:Concepts and definitionsThe purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for s ... active Standard
29119-2-2013 - ISO/IEC/IEEE International Standard - Software and systems engineering —Software testing —Part 2:Test processesThe purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for s ... active Standard
29119-3-2013 - ISO/IEC/IEEE International Standard - Software and systems engineering — Software testing —Part 3: Test documentationThe purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for s ... active Standard
29119-4-2015 - ISO/IEC/IEEE International Standard - Software and systems engineering--Software testing--Part 4: Test techniquesThis standard supports test case design and execution during any phase or type of testing (e.g., unit, integration, system, acceptance, ... active Standard
29119-5-2016 - ISO/IEC/IEEE International Standard - Software and systems engineering -- Software testing -- Part 5: Keyword-Driven TestingThe purpose of the ISO/IEC/IEEE 29119 Software Testing standards is to define an internationally-agreed set of standards for software te ... active Standard
29148-2011 - ISO/IEC/IEEE International Standard - Systems and software engineering -- Life cycle processes --Requirements engineeringThis standard replaces IEEE 830-1998, IEEE 1233-1998, IEEE 1362-1998. ISO/IEC/IEEE 29148:2011 contains provisions for the processes and ... active Standard
31320-1-2012 - ISO/IEC/IEEE International Standard - Information technology -- Modeling Languages -- Part 1: Syntax and Semantics for IDEF0IDEF0 function modeling is designed to represent the decisions, actions, and activities of an existing or prospective organization or sy ... active Standard
31320-2-2012 - ISO/IEC/IEEE International Standard - Information technology -- Modeling Languages -- Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)IDEF1X97 consists of two conceptual modeling languages. The key-style language supports data/information modeling and is downward compat ... active Standard
42010-2011 - ISO/IEC/IEEE Systems and software engineering -- Architecture descriptionISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture des ... active Standard
61158-2017 - IEEE Standard for Industrial Hard Real-Time CommunicationIEEE Std 61158™ is an adoption of the EPSG DS 301, Ethernet POWERLINK--Communication Profile Specification. Ethernet POWERLINK is a co ... active Standard
62142-2005 - IEC 62142 Ed. 1 (IEEE Std 1364.1™-2002): Standard for Verilog(R) Register Transfer Level SynthesisReplaces IEEE Std 1364.1-2002/ Dual logo standard To develop a standard syntax and semantics for Verilog RTL synthesis. This standard s ... withdrawn Standard
62265-2005 - IEC 62265 Ed. 1 (IEEE Std 1603™-2003): Standard for an Advanced Library Format (ALF) Describing Integrated Circuit (IC) Technology, Cells, and BlocksReplaces IEEE Std 1603-2003 / Dual logo standard ALF is a modeling language for library elements used in IC technology. ALF enables des ... withdrawn Standard
62525-2007 - (IEEE Std 1450-1999) International Standard Test Interface Language (STIL) for Digital Test Vector DataStandard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. A test descripti ... active Standard
62860-2013 - IEC/IEEE Test methods for the characterization of organic transistors and materialsRecommended methods and standardized reporting practices for electrical characterization of printed and organic transistors are covered. ... active Standard
62860-1-2013 - IEC/IEEE Test methods for the characterization of organic transistor-based ring oscillatorsRecommended methods and standardized reporting practices for electrical characterization of printed and organic ring oscillators are cov ... active Standard
90003-2015 - IEEE Standard Adoption of ISO/IEC 90003:2014, Software Engineering -- Guidelines for the Application of ISO 9001:2008 to Computer SoftwareThis International Standard provides guidance for organizations in the application of ISO 9001:2008 to the acquisition, supply, developm ... active Standard
C57.146-2006 - IEEE Guide for Interpretation of Gasses Generated in Silicone-Immersed TransformersThis guide is intended to apply to silicone-immersed transformers in which the silicone fluid was the fluid supplied when the transforme ... active Standard
J-STD-016-1995 - Trial-Use Standard Standard for Information Technology Software Life Cycle Processes Software Development Acquirer-Supplier AgreementWithdrawn Standard. This standard defines a set of software development activities and resulting software products. It provides a framew ... withdrawn Standard