Standard Icon

Communications Standards

Displaying results 41 - 80 of 122
Standard Name
Status Help less all
206-1960 - Standards on Television: Measurement of Differential Gain and Differential PhaseDescribes a method for measuring differential gain and differential phase in equipment transmitting either monochrome or color television signals.... Withdrawn Standard
208-1960 - Standards on Video Techniques: Measurement of Resolution of Camera Systems, 1961This standard is a revision of Part II of 50 IRE23.S1, and replaces it in all respects. One of the major characteristics of a television system... Withdrawn Standard
208-1995 - Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 TechniquesThe methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the... Active Standard
269-1992 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone SetsPractical methods for measuring the transmission characteristics of both digital and conventional two-wire analog telephone sets by means of... Superseded Standard
269-2002 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets... Superseded Standard
269a-2007 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets Amendment 1This document amends IEEE Std 269-2002. It covers the areas of: analog telephones; digital telephones; electroacoustic measurements on telephones;... Superseded Standard
312-1977 - Standard Definitions of Terms for Communication SwitchingThis standard is in the form of a telecommunications switching glossary. Attached to this glossary is a permuted index of all terms defined. This... Withdrawn Standard
367-1987 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultWire-line telecommunication facilities serving electric power stations often require that extraordinary protection measures be taken to protect... Superseded Standard
367-1996 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Superseded Standard
367-2012 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Active Standard
378-1986 - Standard on Network Analyzers (100 kHz to 18 GHz)This standard was written for users and manufacturers of automatic network analyzers. The purpose of the standard is to provide common terminology... Withdrawn Standard
455-1985 - Standard Test Procedure for Measuring Longitudinal Balance of Telephone Equipment Operating in the Voice BandThe purpose of this standard is threefold: to define the basic requirements of a test circuit which can be used to measure longitudinal balance.... Withdrawn Standard
469-1988 - Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution TransformersThe standard provides instruction for the testing of distribution transformers as sources of voice-frequency noise. These tests measure the degree... Withdrawn Standard
511-1979 - Standard on Video Signal Transmission Measurement of Linear Waveform DistortionThe standard describes methods for measuring the linear waveform distortions of TV video signals, that is, distortions which are caused by... Withdrawn Standard
661-1979 - Standard Method for Determining Objective Loudness Ratings of Telephone ConnectionsTo describe a practical and reproducible method of determining the loudness ratings of telephone connections. Loudness ratings may be measured... Active Standard
686-1990 - Standard Radar DefinitionsThis standard is published for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Withdrawn Standard
686-1997 - Standard Radar DefinitionsDefinitions for the purpose of promoting clarity and consistency in the use of radar terminology are provided. The definitions represent the... Superseded Standard
686-2008 - Standard Radar DefinitionsDefinitions are provided for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Active Standard
743-1984 - Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency CircuitsThe purpose of this standard is to establish functional requirements for measuring analog transmission characteristics of voice frequency... Superseded Standard
743-1995 - Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for TelecommunicationsPerformance requirements for test equipment that measures the analog transmission parameters of subscriber loops, message trunks, PBX trunks, and... Withdrawn Standard
746-1984 - Performance Measurements of A/D and D/A Converters for PCM Television Video CircuitsThis standard describes methods for measuring the performance of uniformly coded analog-to-digital (A/D) converters and digital-to-analog (D/A)... Withdrawn Standard
752-1986 - Functional Requirements for Methods and Equipment for Measuring the Performance of Tone Address Signal SystemsThis standard provides brief descriptions of applicable tone address signaling techniques and definitions of the related signaling parameters that... Withdrawn Standard
776-1987 - Guide for Inductive Coordination of Electric Supply and Communication LinesThis guide addresses the inductive environment that exists in the vicinity of electric power and wire line telecommunications systems and the... Superseded Standard
776-1992 - Recommended Practice for Inductive Coordination of Electric Supply and Communication LinesThe inductive environment that exists in the vicinity of electric power and wire-line telecommunications systems and the interfering effects that... Active Standard
802-1990 - Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Active Standard
802.11-1997 - Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, part of a... Superseded Standard
802.11-1999 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThis standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant... Superseded Standard
802.11-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
802.11-2007 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Superseded Standard
820-1984 - Standard Telephone Loop Performance Characteristics This standard covers the general parameters and characteristics associated with telephone loops from the subscriber signaling and analog voice... Superseded Standard
820-2005 - Standard Telephone Loop Performance CharacteristicsCommon denominators for subscriber line performance, independent of facility types, construction processes or equipment, and circuit provisioning... Active Standard
823-1989 - Standard Methodologies for Specifying Voicegrade Channel Transmission Parameters and Evaluating Connection Transmission Performance for Speech TelephonyThis IEEE Std 823-1989 provides network planners with the methodology and models for calculating the transmission performance of connections made... Withdrawn Standard
973-1990 - Standard Definitions of Switching System Performance in a Telecommunications EnvironmentThis standard provides definitions of switching system performance in a telecommunications environment. It includes parameters in seven categories... Withdrawn Standard
Displaying results 41 - 80 of 122 - all results